[MMMCOOKIES55]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

I am parting out my dear friend's 1995 E36 M3 coupe. It has been his dedicated track rat for a few years now and recently at a stint up at Mid-Ohio he blew the engine and does not want to invest the money into it any longer so I suggested we part it out and move on to another project.

EVERY single part on the car is for sale. I will only be listing the aftermarket parts below but feel free to Email or PM me if you are in need of an OEM part on the vehicle (I.E. door assembly, dash, fender).

-VAC Motorsports E36 Afermarket seat mounts with sub strap mount and driver side slider **does not include seat brackets**
(400.00)

-VAC Motorsports Gauge Kit with senders (STACK oil pressure, oil temp and water temp). Includes VAC Oil cover tapped for oil pressure and oil temp senders.
(600.00)

-B pillar Harness bar and all associated install hardware
(100.00)

-Aluminum Front under tray (includes brake duct assemblies)
(300.00)

-Carbon Fiber Sunroof insert
(150.00)

-Turner Stage 3 intake, Cams and Head assembly. Includes Intake filter, 3.5HFM, pipe to throttle body, Chip, 24 LB. Injectors, S50US Head assembly with Shrick 264/256 Cams, Valve, lifters and double valve springs**please note head will have to be machined since Engine head gasket blew**
(3000.00)

-Turner Shorty Headers (Jet coated)
(450.00)

-TSW 18x8.5 Forged Wheels with black with Chrome lip mounted on Dunlop Direzza 2 star spec 235ZR 18 tires (square setup) Tires have one track weekend only on them.
(1650.00)

-X-brace
(175.00)

-TC Kline Double adjustable coil over kit with 400# front and 500# rear springs, seen 6000 track miles
(1800.00)

TC Kline front camber plates
(400.00)

UUC Front and rear swaybarbarian with Urethane bushings (front bushings brand new, adjustable)
(300.00)

-Wilwood Calipers (includes stainless steel brake lines and mounting hardware for E36, has half used Hawk HP+ pads installed)
(750.00)

-Zimmerman front rotors (half used)
(200.00)

Diffsonline customer Ramp three clutch 30/90 (30% lock upon accel/90% lock on overrun) 3.73:1 ratio LSD with Expanded Rogue Engineering Diff cover
(2500.00)

Again, This isnt everything and I will be taking parts off the car as they sell. It is sitting here at my work currently if anyone local wants to stop by and buy something off of me. I am only able to do this after work and on the weekends so be patient with me. I will update this post with pictures later this week, thanks everyone!!