|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
E90 and 41e2 code
|
|
01-26-2017, 06:21 PM | #2 |
Private
20
Rep 77
Posts |
According to this page:
http://mechanicalee.blogspot.com/201...-hex-code.html 41E2 = Exhaust Gas Recirculation – Open Circuit |
Appreciate
1
ppiotrek2.00 |
02-01-2017, 03:55 PM | #3 |
New Member
2
Rep 9
Posts |
Yeah, I already found this. I did the EGR test in Rheingold without checking my vaccum pump and everything seems to be fine. However, I get the check light, usually after a long ride. I'm going to remove and clean my EGR this weekend, but I don't think it's going to help since valves in N47 don't get jammed...
|
Appreciate
0
|
02-08-2017, 04:39 PM | #4 |
New Member
2
Rep 9
Posts |
Another news to my issue. I cleaned the valve and its socket. I don't get the check light anymore, however the error still appears in memory. Do you have any suggestions? Thanks.
|
Appreciate
0
|
03-20-2017, 07:50 AM | #5 |
New Member
2
Rep 9
Posts |
I finally managed to resolve the problem. It appeared that the EGR connector was rusty therefore the valve didn't work properly. According to realoem I should buy: 12527507529 as a replacement, however it looks a bit different to what I have on my bimmer. I noticed the temperature sensor having similar socket, so I also bought this connector, this time MLK 12527804179 which was a good guess and works perfectly.
|
Appreciate
0
|
Bookmarks |
|
|