Someone please tell me what this error code is

tldoxmf87 · 04-03-2011, 07:11 PM

Read errors with INPA and I have no idea what they are..
The CEL comes on with the first error, dealer said it just needs software update but wanted to see if anybody had any idea.

Neutrino45 · 04-03-2011, 09:17 PM

Is this the F1 description? Why not hit F2 and see?

tldoxmf87 · 04-05-2011, 01:10 PM

Here's the F2 'detailed' but it doesn't really tell much...

Neutrino45 · 04-05-2011, 04:47 PM

Yes, it does. The 1st entry tells you that you have a thermostat or temperature issue. The 2nd code tells you that you have a voltage problem.

Look up the P160D code and see what you find. You'll need to do some research on your own. It's not going to tell you how to fix it if that's what you're looking for.

Dracon · 04-05-2011, 05:47 PM

You'd need to setup DIS on a VM and get it working with EDIABAS if you want to pull error codes AND have instructions on the most likely cause of the fault and how to fix it.

BPMSport · 04-05-2011, 06:09 PM

I would address the low voltage issue first. 11.44V is WAY too low. It may be causing the first fault to appear.

What version of INPA are you using?

Neutrino45 · 04-05-2011, 08:59 PM

Quote:

Originally Posted by Dracon

You'd need to setup DIS on a VM and get it working with EDIABAS if you want to pull error codes AND have instructions on the most likely cause of the fault and how to fix it.

Is there a step by step instruction on how to setup DIS on a VM?

Quote:

Originally Posted by Mike@Powerchip

I would address the low voltage issue first. 11.44V is WAY too low. It may be causing the first fault to appear.

What version of INPA are you using?

Is he using 1.32?

tldoxmf87 · 04-06-2011, 05:21 AM

I'm not sure what version it is.. but it's the version I downloaded from the link at the coding section here.
What does low voltage mean? Does it mean my battery is dying?
I've been doing some coding recently and I'm thinking that might been when it threw the code because I was on battery for too long.
I cleared the error and the second error does not come back anymore so it might not be a real problem.

tldoxmf87 · 04-06-2011, 05:25 AM

Quote:

Originally Posted by Dracon

You'd need to setup DIS on a VM and get it working with EDIABAS if you want to pull error codes AND have instructions on the most likely cause of the fault and how to fix it.

Any idea how would I do this?
Anywhere you could point me to?
Thanks in advance

04-03-2011, 07:11 PM	#1
tldoxmf87 Captain 40 Rep 720 Posts Drives: e92 TiAg Join Date: Mar 2010 Location: Bellevue iTrader: (14)	Someone please tell me what this error code is Read errors with INPA and I have no idea what they are.. The CEL comes on with the first error, dealer said it just needs software update but wanted to see if anybody had any idea. __________________ E92 TiAg
	Appreciate 0 Tweet Quote

04-03-2011, 09:17 PM	#2
Neutrino45 Major 62 Rep 1,452 Posts Drives: XXX Join Date: Aug 2008 Location: milky way iTrader: (2)	Is this the F1 description? Why not hit F2 and see? __________________
	Appreciate 0 Quote

04-05-2011, 01:10 PM	#3
tldoxmf87 Captain 40 Rep 720 Posts Drives: e92 TiAg Join Date: Mar 2010 Location: Bellevue iTrader: (14)	Here's the F2 'detailed' but it doesn't really tell much... __________________ E92 TiAg
	Appreciate 0 Quote

04-05-2011, 04:47 PM	#4
Neutrino45 Major 62 Rep 1,452 Posts Drives: XXX Join Date: Aug 2008 Location: milky way iTrader: (2)	Yes, it does. The 1st entry tells you that you have a thermostat or temperature issue. The 2nd code tells you that you have a voltage problem. Look up the P160D code and see what you find. You'll need to do some research on your own. It's not going to tell you how to fix it if that's what you're looking for. __________________
	Appreciate 0 Quote

04-05-2011, 05:47 PM	#5
Dracon Major 555 Rep 1,244 Posts Drives: 2013 F10 M5 Join Date: Apr 2009 Location: Out and About iTrader: (34) Garage List 2013 BMW M5 [0.00]	You'd need to setup DIS on a VM and get it working with EDIABAS if you want to pull error codes AND have instructions on the most likely cause of the fault and how to fix it.
	Appreciate 0 Quote

04-05-2011, 06:09 PM	#6
BPMSport 3387 Rep 7,541 Posts Drives: Harrop M3 / F10 M5 / F82 M4 Join Date: Apr 2008 Location: SoCal iTrader: (9) Garage List 2000 BMW M5 [0.00] 1990 BMW 735i Turbo [0.00] 2008 BMW M3 [7.50] 2015 BMW M3 [0.00] 2015 BMW M5 [0.00]	I would address the low voltage issue first. 11.44V is WAY too low. It may be causing the first fault to appear. What version of INPA are you using? __________________ -----\| Like us on Facebook \| Instagram \|\| Tuning Information \| Remote Coding \|----- ----Visit us at www.BPMSport.com - Emotion. Driven. \| Toll Free: (888) 557-5133----
	Appreciate 0 Quote

04-06-2011, 05:21 AM	#8
tldoxmf87 Captain 40 Rep 720 Posts Drives: e92 TiAg Join Date: Mar 2010 Location: Bellevue iTrader: (14)	I'm not sure what version it is.. but it's the version I downloaded from the link at the coding section here. What does low voltage mean? Does it mean my battery is dying? I've been doing some coding recently and I'm thinking that might been when it threw the code because I was on battery for too long. I cleared the error and the second error does not come back anymore so it might not be a real problem. __________________ E92 TiAg
	Appreciate 0 Quote