Official Louisiana chat thread

Bakeme521 · 07-24-2012, 08:37 PM

An mtech front like mine is nearly the same thing instead of having one large brake cooler on each side there is a fog light, and on the passenger side there is an oil cooler. 335is do not have dual oil coolers, it's the same one. The brake coolers on mine actually come off of the center opening on the sides. My bumper actually has less room than the bumper off of a 335is, the n54 has the same exact intercooler piping. There should be no need to cut the bumper, only the radiator support. I would figure out a way to get the mesh in, because like that it looks unfinished to me.

Mkah · 07-24-2012, 08:41 PM

Quote:

Originally Posted by Bakeme521

An mtech front like mine is nearly the same thing instead of having one large brake cooler on each side there is a fog light, and on the passenger side there is an oil cooler. 335is do not have dual oil coolers, it's the same one. The brake coolers on mine actually come off of the center opening on the sides. My bumper actually has less room than the bumper off of a 335is, the n54 has the same exact intercooler piping. There should be no need to cut the bumper, only the radiator support. I would figure out a way to get the mesh in, because like that it looks unfinished to me.

Im going to rip out your front mesh while you're asleep tonight.

Onurleft · 07-24-2012, 08:50 PM

ya'll are so funny debating about your massive air conditioner units on the front of your cars

Bakeme521 · 07-24-2012, 08:57 PM

Quote:

Originally Posted by Onurleft

ya'll are so funny debating about your massive air conditioner units on the front of your cars

haha I like my AC unit to look fraa.

Sara · 07-24-2012, 10:04 PM

Quote:

Originally Posted by ///M 95

Im going to rip out your front mesh while you're asleep tonight.

That sounds dirty

Bakeme521 · 07-24-2012, 10:32 PM

Quote:

Originally Posted by Sara504

That sounds dirty

haha it is, you need some work on your front mesh as well?

Sara · 07-24-2012, 10:45 PM

Quote:

Originally Posted by Bakeme521

haha it is, you need some work on your front mesh as well?

I'll let you know

Yodaime · 07-25-2012, 01:05 AM

Quote:

Originally Posted by Bakeme521

An mtech front like mine is nearly the same thing instead of having one large brake cooler on each side there is a fog light, and on the passenger side there is an oil cooler. 335is do not have dual oil coolers, it's the same one. The brake coolers on mine actually come off of the center opening on the sides. My bumper actually has less room than the bumper off of a 335is, the n54 has the same exact intercooler piping. There should be no need to cut the bumper, only the radiator support. I would figure out a way to get the mesh in, because like that it looks unfinished to me.

I like it without mesh that's just me

Sara · 07-25-2012, 07:43 AM

Im gonna throw up if someone says the M word again...

shaq diesel · 07-25-2012, 08:23 AM

Quote:

Originally Posted by Sara504

Im gonna throw up if someone says the M word again...

You mean "Masche"! LOL

Projekt_BooGie · 07-25-2012, 09:47 AM

what word........microelectrophoretically????

Sara · 07-25-2012, 10:18 AM

Im working on a class action vaginal m*sh lawsuit and that word is forever ruined by the photos Ive seen. I think Im going to throw up now.

Bakeme521 · 07-25-2012, 11:40 AM

Quote:

Originally Posted by Sara504

Im working on a class action vaginal m*sh lawsuit and that word is forever ruined by the photos Ive seen. I think Im going to throw up now.

Da fuq?

LSUbimmer · 07-25-2012, 11:41 AM

Its about that time! New car time

Well new car for me. Im looking at either a 10' or 11' DCT M3. Do any of you La peeps know of any private sellers or dealers not raping you with prices on used M3's?

Im so picky with what I want colorwise, trimwise that it looks like ill be going out of state again to buy exactly what I want but I figured I need to exhaust any and all M3's for sale locally first.

Sara · 07-25-2012, 11:52 AM

Quote:

Originally Posted by LSUbimmer

Its about that time! New car time

Well new car for me. Im looking at either a 10' or 11' DCT M3. Do any of you La peeps know of any private sellers or dealers not raping you with prices on used M3's?

Im so picky with what I want colorwise, trimwise that it looks like ill be going out of state again to buy exactly what I want but I figured I need to exhaust any and all M3's for sale locally first.

McKenna BMW

LSUbimmer · 07-25-2012, 12:03 PM

Quote:

Originally Posted by Sara504

McKenna BMW

They had 7 M3's mostly vert's though.

I am going to be in LA next month tho...

Sara · 07-25-2012, 12:05 PM

Quote:

Originally Posted by LSUbimmer

They had 7 M3's mostly vert's though.

I am going to be in LA next month tho...

There is plenty of dealers in the Los Angeles area. They can get it from another dealer for you and then and sell it to you. It will be broken in by the time your home OR the money you will save by using them will more than cover the cost to ship to car to your home in Baton Rouge. Trust me, thats why I went with them versus the dealers here and in Texas.

I saved $5,427 using McKenna versus Brian Harris. Just saying.

str8nm · 07-25-2012, 12:11 PM

Quote:

Originally Posted by Bakeme521

Da fuq?

You kids crack me up...

LSUbimmer · 07-25-2012, 12:11 PM

Quote:

Originally Posted by Sara504

There is plenty of dealers in the Los Angeles area. They can get it from another dealer for you and then and sell it to you. It will be broken in by the time your home OR the money you will save by using them will more than cover the cost to ship to car to your home in Baton Rouge. Trust me, thats why I went with them versus the dealers here and in Texas.

Thats good to know thanks for the heads up. Ill probably get the car shipped if I buy out of state.

Im going to look at Manheim as well. My good friend just got a 2011 Range Rover from there and saved $7,500 over what a dealer would have charged him.

LSUbimmer · 07-25-2012, 12:14 PM

Quote:

Originally Posted by Sara504

I saved $5,427 using McKenna versus Brian Harris. Just saying.

Yeah Brian Harris sux ball sac they are wayyyyy over priced.

I do like bringing my car into them tho for service..they always seem to do good work for me.

Sara · 07-25-2012, 12:17 PM

Quote:

Originally Posted by LSUbimmer

Thats good to know thanks for the heads up. Ill probably get the car shipped if I buy out of state.

Im going to look at Manheim as well. My good friend just got a 2011 Range Rover from there and saved $7,500 over what a dealer would have charged him.

The ONLY hiccup will be getting it registered. California doesnt give ANYTHING not even a temporary tag plate for out of state purchasers. But its not that difficult. If I can do it on my own, anyone can lol.

MSO
Power of attorney
Exemption form
Bill of sale.

Sara · 07-25-2012, 12:19 PM

Quote:

Originally Posted by str8nm

You kids crack me up...

Doc...its awful.. My eyes will never be the same.

07-24-2012, 08:37 PM	#11155
Bakeme521 Some say... 239 Rep 4,296 Posts Drives: Fresh Join Date: Mar 2010 Location: Baton Rouge n NOLA iTrader: (12) Garage List 2007 BMW 335i [8.24]	An mtech front like mine is nearly the same thing instead of having one large brake cooler on each side there is a fog light, and on the passenger side there is an oil cooler. 335is do not have dual oil coolers, it's the same one. The brake coolers on mine actually come off of the center opening on the sides. My bumper actually has less room than the bumper off of a 335is, the n54 has the same exact intercooler piping. There should be no need to cut the bumper, only the radiator support. I would figure out a way to get the mesh in, because like that it looks unfinished to me. __________________ I have exhaust and an intake...
	Appreciate 0

07-24-2012, 08:50 PM	#11157
Onurleft Captain 50 Rep 873 Posts Drives: RPM Join Date: May 2010 Location: Baton Rouge and Atlanta iTrader: (0)	ya'll are so funny debating about your massive air conditioner units on the front of your cars __________________ Youtube Shenanigans
	Appreciate 0

07-25-2012, 07:43 AM	#11163
Sara Lieutenant General 5791 Rep 17,879 Posts Drives: A car Join Date: Aug 2007 Location: Nola iTrader: (6)	Im gonna throw up if someone says the M word again...
	Appreciate 0

07-25-2012, 09:47 AM	#11165
Projekt_BooGie Average Car Exceeding Expectations (ACEE) 357 Rep 4,806 Posts Drives: 2007 335i e92 Join Date: Nov 2010 Location: Home random floods and Cajun Navy iTrader: (9) Garage List 2007 e92 [7.00]	what word........microelectrophoretically???? __________________ too much to list...just know its wide and bagged
	Appreciate 0

07-25-2012, 10:18 AM	#11166
Sara Lieutenant General 5791 Rep 17,879 Posts Drives: A car Join Date: Aug 2007 Location: Nola iTrader: (6)	Im working on a class action vaginal m*sh lawsuit and that word is forever ruined by the photos Ive seen. I think Im going to throw up now.
	Appreciate 0

07-25-2012, 11:41 AM	#11168
LSUbimmer Your mom's house 17 Rep 349 Posts Drives: 07' 335i Join Date: Jul 2009 Location: Baton Rouge,La iTrader: (0)	Its about that time! New car time Well new car for me. Im looking at either a 10' or 11' DCT M3. Do any of you La peeps know of any private sellers or dealers not raping you with prices on used M3's? Im so picky with what I want colorwise, trimwise that it looks like ill be going out of state again to buy exactly what I want but I figured I need to exhaust any and all M3's for sale locally first. __________________ 2011 M3 DCT, ZCP - LUX H8, BPM Stage 2 Tune, ACM Test Pipes, BPM Sport Coding w/ Euro MDM
	Appreciate 0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search