Who has a V-1 Concealed Display installed.

sflgator · 11-02-2007, 09:40 PM

Quote:

Originally Posted by Richwm

I don't know of any way to keep the main unit on, maybe if you cut one of the wires in the phone cord going to the Concealed Display. Maybe ill have to try it and see.

I called Valentine today; they said no, both the V1 visual display AND the Concealed Display cannot be on at the same time...how stupid, imho.

Even the guy I spoke at Valentine said he thought that was a good idea and he would pass it on to the engineers -- yeah, whatever...don't you think they should've thought of that before.

Anyway, I returned the Concealed Display today to get my money back on it.

So, far, the V1 works well, but I hate how you can't turn off X-band entirely...this thing is so friggin sensitive; it picks up every automatic store door, etc. even on "L" mode.

Joe Bimmer · 11-03-2007, 12:24 AM

Quote:

Originally Posted by sflgator

So, far, the V1 works well, but I hate how you can't turn off X-band entirely...this thing is so friggin sensitive; it picks up every automatic store door, etc. even on "L" mode.

You CAN turn off X-band entirely. Read the manual, or find the instructions online. When you turn on the unit, you have to press & hold the "mute" knob, and it enters the programming mode. Then you can adjust all kinds of settings. I disabled the X-band on mine and it's great!

sflgator · 11-03-2007, 02:30 PM

Quote:

Originally Posted by Joe Bimmer

You CAN turn off X-band entirely. Read the manual, or find the instructions online. When you turn on the unit, you have to press & hold the "mute" knob, and it enters the programming mode. Then you can adjust all kinds of settings. I disabled the X-band on mine and it's great!

Hmmmm....the manual didn't mention that (the manual is kind of vague

and doesn't say much in regards to custom settings). It just mentions how to change modes by holding and releasing the mute button, but doesn't say anything about turning off X band entirely; I currently have it in "L" mode (Advanced Logic), but that still picks up X band (if the computer thinks it's legit)...but NO police use X band any more in my area. I will try this though. Thank you.

AndrewAZ · 11-05-2007, 12:54 AM

I have the main unit up by the mirror (right side so it more hidden).. You can see my CD in the picture.. I have it held on by a pice of double stick something that came with my XM radio install. Its very easy to see and especially at night, I usually run my V1 silent and rely on just the visual warnings. Best of all people cant see it from the outside unless they are looking in at the right angle, also passengers dont notice it unless its night and they are in the back.. Its funny to have them asking "why are you slowing down" and I tell them "cop up ahead or behind me just wait".

ren · 11-05-2007, 10:29 AM

Quote:

Originally Posted by sflgator

Hmmmm....the manual didn't mention that (the manual is kind of vague

and doesn't say much in regards to custom settings). It just mentions how to change modes by holding and releasing the mute button, but doesn't say anything about turning off X band entirely; I currently have it in "L" mode (Advanced Logic), but that still picks up X band (if the computer thinks it's legit)...but NO police use X band any more in my area. I will try this though. Thank you.

You can find the instructions here: http://www.valentine1.com/lab/MikesLabRpt3.asp

sflgator · 11-07-2007, 09:04 PM

Quote:

Originally Posted by erensf

You can find the instructions here: http://www.valentine1.com/lab/MikesLabRpt3.asp

That's what I was looking for. Thanks.

btw -- must this all be so friggin complicated?

Damn Mike Valentine...I guess he knows how to build a highly sensitive radar detector, but he knows NOTHING about user intuitiveness and control!!!!

Lotus99 · 11-26-2007, 07:58 PM

Here's my post in another forum:

MY POST

Can anyone tell me if it would be doable on the 335i? Can someone pls. snap some pics of the area above the steering column from the passenger viewpoint (side shot) and one of the instrument cluster?

Thanks!

rideelement247 · 11-26-2007, 08:26 PM

Quote:

Originally Posted by Amiro

Here's my post in another forum:

MY POST

Can anyone tell me if it would be doable on the 335i? Can someone pls. snap some pics of the area above the steering column from the passenger viewpoint (side shot) and one of the instrument cluster?

Thanks!

If you have a way of tting the concealed display to fit into a plastic case like that, then yea, it wll work. Some users place it on the side of the instrument cluster, by the oil temp. gauge on the 335i...if you search it up, you will find a BUNCH of ideas.

speedytobey · 11-30-2007, 06:09 PM

I did it, consealed the display in the ashtray, took me 2 hours, but its worth it, very clean. Thank to everyone that posted on this thread

Andrew@ET · 02-13-2008, 11:52 PM

pics?

TheJackal · 02-14-2008, 12:04 AM

Check this out. Group Buy going on at radardetector.net for modified colored concealed displays.
http://www.radardetector.net/viewtop...er=asc&start=0

Jack Delete

Mute button Delete

Gig103 · 02-15-2008, 12:17 PM

Wow those thin concealed displays give me an idea... Has anyone here ever mounted one on the dash with sticky tape (or would that mess up the dash)?

I attached a quick&dirty photoshop...

AndrewAZ · 02-15-2008, 01:51 PM

Quote:

Originally Posted by Gig103

Wow those thin concealed displays give me an idea... Has anyone here ever mounted one on the dash with sticky tape (or would that mess up the dash)?

I attached a quick&dirty photoshop...

Post # 70 in this topic... just scroll up.. I use a pice of double stick tape on the dash to hold mine in place.. Just use a little bit of rubbing alch to clean off the tape residue when you sell or trade in the car.

Gig103 · 02-15-2008, 02:06 PM

Quote:

Originally Posted by AndrewAZ

Post # 70 in this topic... just scroll up.. I use a pice of double stick tape on the dash to hold mine in place.. Just use a little bit of rubbing alch to clean off the tape residue when you sell or trade in the car.

I saw yours, Andrew, and then when i saw the slim display it gave me the idea for putting it a little lower is all...

Andrew@ET · 02-15-2008, 07:49 PM

any one part of that forum. can you ask him how much for it thin but keep all the leds red.

TheJackal · 02-15-2008, 08:01 PM

I joined the forum but never got my account activiation email.

Andrew@ET · 02-15-2008, 08:13 PM

well when u do can you plz ask him for me prices for both thin displays one with jack delete one without. stock colors.

Andrew@ET · 02-15-2008, 08:14 PM

btw gig that looks FUKin sick. how could we run the wire? i really dont want to see wires

TheJackal · 02-15-2008, 10:40 PM

Quote:

Originally Posted by miamibusta69

any one part of that forum. can you ask him how much for it thin but keep all the leds red.

Slim with no color change is $80 shipped. If we can round up 5 guys from this board, REBinc will do it for $70 for us. If you wnan to start a list in this thread, I'd be happy to coordinate the whole thing with him.

TheJackal · 02-15-2008, 10:49 PM

Quote:

Originally Posted by miamibusta69

btw gig that looks FUKin sick. how could we run the wire? i really dont want to see wires

two ways I can see to conceal the wire as much as possible. Have it come out the back and drill a hole in the dash where the concealed display will go or if you on't want to put a hole in your dash, have the wire come ou the bottom of the concealed display and have it go right into the seam between the dash and the wood trim piece (just above the vent).

I think there are a lot of options to hide the wire with a slim display, especially with the jack delete. To make things even better, I asked him about the textured finish on the slim display. He said he has some 600 grit sand paper for a different project that he'll try and use to perfect the finish. To me, that would be the icing on the cake. I would not hesitate to order one. I'll probably get on either way but that would vertainly seal the deal for me.

Gig103 · 02-16-2008, 02:09 AM

Quote:

Originally Posted by miamibusta69

btw gig that looks FUKin sick. how could we run the wire? i really dont want to see wires

I did photoshop that, but I was thinking that with a thin display, and the jack delete coming out the bottom, you'd run it along the trim to the pillar, then up along the airbag (tucked in) to the top of the windshield and across to the V1, assuming it is by the rearview mirror.

Andrew@ET · 02-16-2008, 11:03 AM

thing is im a lease. cant really drill in my dash. i was it in my ash tray but i cant see that when im driving fast 70 sounds really good i just got a job too

11-05-2007, 12:54 AM	#70
AndrewAZ Major 137 Rep 1,243 Posts Drives: 335i Join Date: Jan 2007 Location: CA iTrader: (0)	I have the main unit up by the mirror (right side so it more hidden).. You can see my CD in the picture.. I have it held on by a pice of double stick something that came with my XM radio install. Its very easy to see and especially at night, I usually run my V1 silent and rely on just the visual warnings. Best of all people cant see it from the outside unless they are looking in at the right angle, also passengers dont notice it unless its night and they are in the back.. Its funny to have them asking "why are you slowing down" and I tell them "cop up ahead or behind me just wait". Attached Images
	Appreciate 0 Quote

11-26-2007, 07:58 PM	#73
Lotus99 Colonel 628 Rep 2,808 Posts Drives: 19 M2C & 18 X3 M40i Join Date: Jul 2007 Location: Canada iTrader: (1)	What do you all think about this way? Here's my post in another forum: MY POST Can anyone tell me if it would be doable on the 335i? Can someone pls. snap some pics of the area above the steering column from the passenger viewpoint (side shot) and one of the instrument cluster? Thanks!
	Appreciate 0 Quote

11-30-2007, 06:09 PM	#75
speedytobey Second Lieutenant 11 Rep 204 Posts Drives: 2007 E92 335i Join Date: Mar 2007 Location: SoCal. iTrader: (0)	I did it, consealed the display in the ashtray, took me 2 hours, but its worth it, very clean. Thank to everyone that posted on this thread __________________ E92 335i Graphite/ Grey poplar trim/ Black Dakota/ Sports/ Premium/ Auto/ Paddle/ Heated seats/ Nav/ Sat. Radio/ CA/ 19" V710/ Painted reflectors/ Rear fog light
	Appreciate 0 Quote

02-13-2008, 11:52 PM	#76
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	pics?
	Appreciate 0 Quote

02-14-2008, 12:04 AM	#77
TheJackal First Lieutenant 17 Rep 375 Posts Drives: 2008 e90 335xi Join Date: Dec 2007 Location: NJ iTrader: (2)	Check this out. Group Buy going on at radardetector.net for modified colored concealed displays. http://www.radardetector.net/viewtop...er=asc&start=0 Jack Delete Mute button Delete
	Appreciate 0 Quote

02-15-2008, 12:17 PM	#78
Gig103 Major 68 Rep 1,324 Posts Drives: 2014 Tesla P85D Join Date: Aug 2007 Location: Gilbert, AZ iTrader: (1)	Wow those thin concealed displays give me an idea... Has anyone here ever mounted one on the dash with sticky tape (or would that mess up the dash)? I attached a quick&dirty photoshop... Attached Images __________________ Was: 2008 335xi sedan 6MT Black Sapphire Metallic Is: 2014 Tesla P85D (Blue Metallic) Wife's: 2013 Infiniti G37 S sedan 6MT, Black
	Appreciate 0 Quote

02-15-2008, 07:49 PM	#81
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	any one part of that forum. can you ask him how much for it thin but keep all the leds red.
	Appreciate 0 Quote

02-15-2008, 08:01 PM	#82
TheJackal First Lieutenant 17 Rep 375 Posts Drives: 2008 e90 335xi Join Date: Dec 2007 Location: NJ iTrader: (2)	I joined the forum but never got my account activiation email.
	Appreciate 0 Quote

02-15-2008, 08:13 PM	#83
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	well when u do can you plz ask him for me prices for both thin displays one with jack delete one without. stock colors.
	Appreciate 0 Quote

02-15-2008, 08:14 PM	#84
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	btw gig that looks FUKin sick. how could we run the wire? i really dont want to see wires
	Appreciate 0 Quote

02-16-2008, 11:03 AM	#88
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	thing is im a lease. cant really drill in my dash. i was it in my ash tray but i cant see that when im driving fast 70 sounds really good i just got a job too
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search