[WatashiEd]

Originally Posted by Trev88

Thought it would make the look more sleek! Haha not too flashy! But if you're going flashy go Yellow or Gold!

Yes sir, gold it is

[WatashiEd]

Originally Posted by Trev88

Hey ed! Did u just buy my cf spoiler?

Trevor from Melbourne?? OMG very small world!! Thanks for the gift man!!!

[vtl]

Originally Posted by EdDie_TurboN52

Ohhhh F.... thought it was a matter of fabricating the calipers adapters, correct PCD and center bore that's it... Cause I am running 19" 220m, should have enough clearance both both rotors...

So what handbrake will needed to be fitted in for the job Vince??

For the front brakes that is all you have to do. Not for the rears

No idea what handbrake would be suitable. You would need to compare the discs side by side and see what the offset and diameter differences are. There is a bunch of different handbrake assemblies that will bolt into an e90 rear hub (e90/e82) with different offsets so you can look into that.

[Trev88]

Are those brembo gt? Thought there's one that fits e90s are there handbrake modifications that are needed to fit them?

[CashedUpBogan]

Damb you use a helluva lot of emojis. You're either a fobby Asian or a girl lol

[Boganian Rubes]

Originally Posted by CashedUpBogan

Damb you use a helluva lot of emojis. You're either a fobby Asian or a girl lol

Eddie isn't a ladies name right? Feminists pls don sue me
But I'm a fobby Romanian

[CashedUpBogan]

Originally Posted by Rub3n

Eddie isn't a ladies name right? Feminists pls don sue me
But I'm a fobby Romanian

Dude you're a bigger bogan than I am. Change your user name to Boganian rubes lol

[Fundguy1]

Originally Posted by EdDie_TurboN52

Thanks Elliott!!

Gonna rebuild the seals, clean the pistons and repaint them before going in, any suggestion on what color to paint?? My car is red btw

Gold

[Boganian Rubes]

Originally Posted by CashedUpBogan

Dude you're a bigger bogan than I am. Change your user name to Boganian rubes lol

Hahaha! How even?!?! You're like the biggest bogan Asian ever

[froop]

Originally Posted by vtl

For the front brakes that is all you have to do. Not for the rears

No idea what handbrake would be suitable. You would need to compare the discs side by side and see what the offset and diameter differences are. There is a bunch of different handbrake assemblies that will bolt into an e90 rear hub (e90/e82) with different offsets so you can look into that.

Hydraulic handbrake would get my vote

[WatashiEd]

Originally Posted by vtl

For the front brakes that is all you have to do. Not for the rears

No idea what handbrake would be suitable. You would need to compare the discs side by side and see what the offset and diameter differences are. There is a bunch of different handbrake assemblies that will bolt into an e90 rear hub (e90/e82) with different offsets so you can look into that.

FML... didn't know mod needed for handbrake to fit rear... prob will do some homework tonight to see what is the solution

[WatashiEd]

Originally Posted by Trev88

Are those brembo gt? Thought there's one that fits e90s are there handbrake modifications that are needed to fit them?

nope, I think it's 18z?? yea I thought so too!! saw quite a lot of e90/e92/e93 N52/N54/N55 fitting them without issues??

[WatashiEd]

Originally Posted by CashedUpBogan

Damb you use a helluva lot of emojis. You're either a fobby Asian or a girl lol

Originally Posted by Boganian Rubes

Eddie isn't a ladies name right? Feminists pls don sue me
But I'm a fobby Romanian

Originally Posted by CashedUpBogan

Dude you're a bigger bogan than I am. Change your user name to Boganian rubes lol

Originally Posted by Boganian Rubes

Hahaha! How even?!?! You're like the biggest bogan Asian ever

BAHAHAHAHAHAAHA just try to best utilise the forum features you know

[WatashiEd]

Originally Posted by Fundguy1

Gold

Great minds think alike bro!!!!

[WatashiEd]

Originally Posted by froop

Hydraulic handbrake would get my vote

HEYYYYYY that sounds like a good idea!!! Might as well swap hydraulic brake in yea!!

[donR]

Where abouts do you plan to get the breaks re-built? I also have a set of Brembos that need rebuilding and painting.

[WatashiEd]

Originally Posted by donR

Where abouts do you plan to get the breaks re-built? I also have a set of Brembos that need rebuilding and painting.

I am doing them myself Don, just need to take them all apart to clean thoroughly with brake cleaner, replace all the dusk seals the oil seals in the pistons, strip the paint with aircraft paint strippers and high pressure hose, then dry and paint with VHT primer, paint coating and clear coating followed by oven bake cure

[donR]

Yeah, I tried stripping my brakes with normal paint stripper but it did nothing.

What are the aircraft pain strippers? I haven't seen those, where do you get them?

[froop]

Originally Posted by EdDie_TurboN52

HEYYYYYY that sounds like a good idea!!! Might as well swap hydraulic brake in yea!!

If you actually go ahead and do this, please let me know how it goes and what parts you get. Really want to do this to my car for motorkhana.

[WatashiEd]

Originally Posted by donR

Yeah, I tried stripping my brakes with normal paint stripper but it did nothing.

What are the aircraft pain strippers? I haven't seen those, where do you get them?

I got it from Sydney Solvents, if you're in Sydney, get a bucket come over and take some, I got a bucket of 20L sitting in the garage lol

[WatashiEd]

Originally Posted by froop

If you actually go ahead and do this, please let me know how it goes and what parts you get. Really want to do this to my car for motorkhana.

Yea sure, will keep you updated man

[/335]

Originally Posted by EdDie_TurboN52

Yea sure, will keep you updated man

Keep me updated too thanks mate

:thum sup:: thumsup::thums up::co ol!::sla p::mad02 60: