[kokignatov]

Originally Posted by BMW-335i-07

Try this and start all your coding from beginning!


1. Open NCSEXPERT
2. File > Load profile > Select Expertmode > Click OK
3. Press F1 (VIN/ZCS/FA)
4. Press F3 (CS/FA f. EC) > Select E89 > Click OK > Select CAS > Click OK
5. Press F6 (Back)
6. Press F2 Change job to SG_Codieren
7. Press F3 Execute job

You mean to reset CAS factory settings ...?

[Elliott@DetailAddict]

Depending on year and modules you simply may not have certain options. Sorry.
Just like how some 06's dont have certain options in the KOMBI.

[kokignatov]

Originally Posted by Grant@DetailAddict

Depending on year and modules you simply may not have certain options. Sorry.
Just like how some 06's dont have certain options in the KOMBI.

I thought they use same modules for the whole MY06 ..and after i saw that someone did it and checked it at the spreadsheet i decided it must be there..but its not...

[Elliott@DetailAddict]

No. Depending on what was in the parts bin and at what end of the year it was produced they can differ.
Which is why the spread sheet is only a reference guide, not the law.

[kokignatov]

Originally Posted by Grant@DetailAddict

No. Depending on what was in the parts bin and at what end of the year it was produced they can differ.
Which is why the spread sheet is only a reference guide, not the law.

I get it...so it seems there arent such values at the modules at all...the car is 2006/02 btw...thank you for the cooperation ..highly appreciate it...

[Tuesday]

Originally Posted by kokignatov

I am tryin to set VA_FB_ENTERTAINMEN to aktiv (as per spreadsheet) in order always when starts the car the display to start in ENTERTAINMENT mode by default. Now when i start my car it aways check for the navigation disc (there is no such one in my CD) And i thnik if i set this option i will skip this check for the disk. Ill post TRC file of M_ASK and photo of the display later after work...thanks for tryin help me

If your goal is to override the navigation because you do not use it, try this:

NAVIGATION_MASK
aktiv ---> nicht_aktiv

I have never tried this, but it makes sense to me that it may be a great place to start.

[kokignatov]

It's 4 AM in my country and i am gonna give it a try tomorrow( actually its after few hours ) ..it sounds logical..thanks for the quick responce..

[seek1985]

Hi becaus the Problem with the

ZYCLUS_VOLLEND_LLR_AUS

i found in my 2JBBF SG a Options named "ZYCLUS_VOLLEND_KLR_AUS" is set standard to "nicht_aktiv".

Maybe its the same as "ZYCLUS_VOLLEND_LLR_AUS" just try it. I cant becaus i wait on a new K-DCAN Cable my is burned yesterday

My Car is a E90 318i 12/2007 and i haven`t as you no CAPPL or CCC Module. I think this is the Navi Business that have only MASK.