Anyone with a Scan Tool wanna help me out?

Wickede92 · 06-12-2014, 04:26 PM

Hi,

I just swapped out my front seats and now I am getting a airbag error. I did disconnect the battery during the seat swap so I am not sure why I am still getting the airbag error. Would anybody be kind enough to help me scan/clear out the codes? I am located in Fountain Valley and can pay for gas and beer

Thanks,

Paul

EuroKar · 06-12-2014, 04:58 PM

Quote:

Originally Posted by Wickede92

Hi,

I just swapped out my front seats and now I am getting a airbag error. I did disconnect the battery during the seat swap so I am not sure why I am still getting the airbag error. Would anybody be kind enough to help me scan/clear out the codes? I am located in Fountain Valley and can pay for gas and beer

Thanks,

Paul

I'm in Riverside county.
I'll reset it for you

KwlAznKid · 06-12-2014, 05:14 PM

i need a code pulled, can anyone help? in OC

edit

op don't meant to threadjack but just figured I wouldn't post an almost identical post

rooringhusky · 06-12-2014, 06:38 PM

In Yorba Linda (close to Anaheim Hills). If anyone needs help pulling codes just shoot me a PM.

TMR · 06-12-2014, 10:44 PM

I have a scan tool.

mythek · 06-13-2014, 12:15 AM

i have software installed and updated on my laptop and as well as the cable. but i haven't touched coding in awhile (and i was a noob then) so I have no idea how to use it anymore. If you dont mind figuring it out on ur own, i can let u borrow the laptop and software. i work in fountain valley

edit: i forgot to tell u the softwares i have installed. they are INPA, NCS-Expert, Tool32, WinkFP.

NEFARIOUS · 06-13-2014, 01:00 AM

Quote:

Originally Posted by mythek

i have software installed and updated on my laptop and as well as the cable. but i haven't touched coding in awhile (and i was a noob then) so I have no idea how to use it anymore. If you dont mind figuring it out on ur own, i can let u borrow the laptop and software. i work in fountain valley

edit: i forgot to tell u the softwares i have installed. they are INPA, NCS-Expert, Tool32, WinkFP.

I'm moving to Anaheim or Fullerton in about 2 weeks... Mind if I join in on this since I want to reprogram a few things? I also do IT services so I can probably figure it out.

NEFARIOUS · 06-13-2014, 01:06 AM

Quote:

Originally Posted by mythek

i have software installed and updated on my laptop and as well as the cable. but i haven't touched coding in awhile (and i was a noob then) so I have no idea how to use it anymore. If you dont mind figuring it out on ur own, i can let u borrow the laptop and software. i work in fountain valley

edit: i forgot to tell u the softwares i have installed. they are INPA, NCS-Expert, Tool32, WinkFP.

I'm moving to Anaheim or Fullerton in about 2 weeks... Mind if I join in on this since I want to reprogram a few things? I also do IT services so I can probably figure it out.

Wickede92 · 06-13-2014, 01:36 AM

Thanks fellas!!

Lets schedule a time so we all can do it at the same time. Anybody happen to know what fault codes 93AE and 93AF are and can they be reset?

Quote:

Originally Posted by rooringhusky

In Yorba Linda (close to Anaheim Hills). If anyone needs help pulling codes just shoot me a PM.

mythek · 06-14-2014, 06:33 PM

Quote:

Originally Posted by NEFARIOUS

I'm moving to Anaheim or Fullerton in about 2 weeks... Mind if I join in on this since I want to reprogram a few things? I also do IT services so I can probably figure it out.

for sure man. in fact, my mom lives in garden grove (border line anaheim, less than 2 miles from disneyland) and i'm often there to watch her dog. just let me know when u wanna do it ahead of time, so I can bring my laptop and meet u there.

there are tons of information on almost anything you wanna code. I'm sure it's not hard to figure it out. I'm just too lazy

mythek · 06-14-2014, 06:35 PM

and if u need any complicated coding done, i know a guy from germany that can remotely code ur car. since i know him, rest assure its cheaper than anywhere u can find.

06-12-2014, 04:26 PM	#1
Wickede92 Captain 17 Rep 669 Posts Drives: e92 Join Date: Sep 2008 Location: SoCal iTrader: (3)	Anyone with a Scan Tool wanna help me out? Hi, I just swapped out my front seats and now I am getting a airbag error. I did disconnect the battery during the seat swap so I am not sure why I am still getting the airbag error. Would anybody be kind enough to help me scan/clear out the codes? I am located in Fountain Valley and can pay for gas and beer Thanks, Paul
	Appreciate 0 Tweet Quote

06-12-2014, 05:14 PM	#3
KwlAznKid Brigadier General 354 Rep 3,036 Posts Drives: BMW/MERCEDES/PORSCHE Join Date: Jun 2005 Location: Los Angeles/Fremont USC/UCSD Alum iTrader: (6)	i need a code pulled, can anyone help? in OC edit op don't meant to threadjack but just figured I wouldn't post an almost identical post __________________ BMW E93 M3 / Mercedes Benz W209 CLK500 BMW E64 650I(sold) / BMW E92 328I(sold) / BMW E46 M3(sold) / BMW E92 335I(sold) Porsche 996 911 C2(sold) / BMW E46 325CI(totaled)
	Appreciate 0 Quote

06-12-2014, 06:38 PM	#4
rooringhusky Objects in the mirror are losing 105 Rep 1,133 Posts Drives: 2007 BMW 335i E92 AW/CR 6MT Join Date: Mar 2011 Location: Socal (OC/Riverside) iTrader: (19) Garage List 2007 BMW 335i [10.00]	In Yorba Linda (close to Anaheim Hills). If anyone needs help pulling codes just shoot me a PM.
	Appreciate 0 Quote

06-12-2014, 10:44 PM	#5
TMR Brigadier General 394 Rep 3,161 Posts Drives: M3 Join Date: Jun 2008 Location: Torrance iTrader: (12)	I have a scan tool. __________________ 2015 M3 BPM Tuned, Eibach, Magnaflow and more www.tmrmzine.com/m3/f80 SOLD E92 Slēk Carbon Fiber Widebody M3 www.tmrmzine.com/m3/slek/ SOLD E92 335i Stage 3+ with all the toys www.tmrmzine.com/335/ SOLD E39 M5 Modded, What a great car! www.tmrmzine.com/m5/
	Appreciate 0 Quote

06-13-2014, 12:15 AM	#6
mythek Captain 40 Rep 823 Posts Drives: 2008 335i Coupe TIAG Join Date: Jun 2013 Location: Orange County, CA, USA, NA, EARTH. iTrader: (5)	i have software installed and updated on my laptop and as well as the cable. but i haven't touched coding in awhile (and i was a noob then) so I have no idea how to use it anymore. If you dont mind figuring it out on ur own, i can let u borrow the laptop and software. i work in fountain valley edit: i forgot to tell u the softwares i have installed. they are INPA, NCS-Expert, Tool32, WinkFP.
	Appreciate 0 Quote

06-14-2014, 06:35 PM	#11
mythek Captain 40 Rep 823 Posts Drives: 2008 335i Coupe TIAG Join Date: Jun 2013 Location: Orange County, CA, USA, NA, EARTH. iTrader: (5)	and if u need any complicated coding done, i know a guy from germany that can remotely code ur car. since i know him, rest assure its cheaper than anywhere u can find.
	Appreciate 0 Quote