VRSF Exhaust Installed. Pictures Inside

Tiago@VRSF · 06-12-2015, 07:18 AM

2-3 weeks before we give them the ok to produce and about 6-8 weeks until production is finished and the product is in hand.

The Ghost · 06-12-2015, 11:38 PM

Quote:

Originally Posted by Tiago@VRSF

We don't have production units coming in yet, still working on a finalized design.

Now, I'm a reasonably patient person, but what's taking so long? I mean, you can just tack weld sections on the car to validate your design, then have 1 or 2 rounds of samples come back. This should be much easier than downpipes to mock and fab due to space.

Stucks · 06-13-2015, 05:09 PM

Quote:

Originally Posted by The Ghost

Now, I'm a reasonably patient person, but what's taking so long? I mean, you can just tack weld sections on the car to validate your design, then have 1 or 2 rounds of samples come back. This should be much easier than downpipes to mock and fab due to space.

+1 there are so many people waiting for this exhaust to be done, it should be at the top of the priority list.

N54 TuNeR · 06-13-2015, 05:14 PM

Quote:

Originally Posted by Stucks

+1 there are so many people waiting for this exhaust to be done, it should be at the top of the priority list.

+2^

jlcf22 · 06-13-2015, 05:32 PM

Tiago is losing out in money big time, not making inlets and taking forever with the exhaust

Beemzilla · 06-14-2015, 01:21 PM

Recently installed RBturbos, inlets, VRSF 7" IC, VRSF downpipe, VRSF CP, and a bunch of misc parts along with a incoming tune from BQ/Wedge, only thing missing is a catback... I've been super patient cause I want this exhaust, but I can't wait till snow is on the ground to complete the FBO project on this car.

sliderslider · 06-14-2015, 03:02 PM

Quote:

Originally Posted by Beamzilla

Recently installed RBturbos, inlets, VRSF 7" IC, VRSF downpipe, VRSF CP, and a bunch of misc parts along with a incoming tune from BQ/Wedge, only thing missing is a catback... I've been super patient cause I want this exhaust, but I can't wait till snow is on the ground to complete the FBO project on this car.

just go BMW performance

idratherbesurfing · 06-14-2015, 04:19 PM

Quote:

Originally Posted by Beamzilla

Recently installed RBturbos, inlets, VRSF 7" IC, VRSF downpipe, VRSF CP, and a bunch of misc parts along with a incoming tune from BQ/Wedge, only thing missing is a catback... I've been super patient cause I want this exhaust, but I can't wait till snow is on the ground to complete the FBO project on this car.

Have a exhaust shop weld you one..its not hard for them to do

Welterweight · 06-14-2015, 05:45 PM

I went BMW performance a couple months ago with FBO and E85 BQ/Wedge tune. Car sounds amazing!!!! You wont regret it. If this exhaust is ready I may grab it next Spring.

dbworld4k · 06-14-2015, 08:02 PM

Quote:

Originally Posted by The Ghost

Quote:

Originally Posted by Tiago@VRSF

We don't have production units coming in yet, still working on a finalized design.

Now, I'm a reasonably patient person, but what's taking so long? I mean, you can just tack weld sections on the car to validate your design, then have 1 or 2 rounds of samples come back. This should be much easier than downpipes to mock and fab due to space.

It's probably never going to be released. Lol. Probably one of the funniest threads/major fails I've seen by a vendor on any forum I've been part of in a decade

:

Milan · 06-15-2015, 06:34 PM

Quote:

Originally Posted by dbworld4k

It's probably never going to be released. Lol. Probably one of the funniest threads/major fails I've seen by a vendor on any forum I've been part of in a decade

:

It sucks because they make awesome products but this is getting kinda silly.

Beemzilla · 06-17-2015, 12:20 AM

Demand > Supply

I wonder if I could just purchase the collector from DP's to single 3.5" and just fab the rest myself. Can someone point me in that direction?

idratherbesurfing · 06-17-2015, 05:05 AM

[QUOTE=Beamzilla;18103541]Demand > Supply

I wonder if I could just purchase the collector from DP's to single 3.5" and just fab the rest myself. Can someone point me in that direction?[/

Have a exhaust shop do it...theres usually always one around. And they always have the materials to do it right away.

Tiago@VRSF · 06-17-2015, 06:32 PM

This thread is years old and most people don't even realize that it was a review thread for the first version of our exhaust. This is not a teaser thread.

The most recent ETA will depends on how long it takes our supplier to provide us with the last component of the build. Once it arrives, we have to finish whatever project is on the lift and we can test/approve this. As of right now, this is high priority.

Milan · 06-18-2015, 05:05 PM

Tiago can you work on an inlet solution for us too? We basically need you to make every aftermarket part available since you are the only one who seems to be able to make a quality product without bending people over in the process.

SGe92is · 06-18-2015, 06:58 PM

Quote:

Originally Posted by Tiago@VRSF

This thread is years old and most people don't even realize that it was a review thread for the first version of our exhaust. This is not a teaser thread.

The most recent ETA will depends on how long it takes our supplier to provide us with the last component of the build. Once it arrives, we have to finish whatever project is on the lift and we can test/approve this. As of right now, this is high priority.

Would be nice if we could still purchase the original one though.

lol

MESSENGERMAN · 06-18-2015, 07:22 PM

I'd like to buy this, but debating on how long it will be til its finished. May go the Cobb cbe route.

Acekid187 · 06-25-2015, 02:00 AM

Quote:

Originally Posted by Milan

Tiago can you work on an inlet solution for us too? We basically need you to make every aftermarket part available since you are the only one who seems to be able to make a quality product without bending people over in the process.

+1 on this

idratherbesurfing · 06-25-2015, 08:26 AM

Quote:

Originally Posted by SGe92is

Would be nice if we could still purchase the original one though.

lol

The whole reason theyre re designing this is because the original one hits the ground...

The Ghost · 06-25-2015, 06:48 PM

Quote:

Originally Posted by SGe92is

Would be nice if we could still purchase the original one though.

lol

Agreed, I would buy the V1 if it was avail.

Hokie_BMW · 06-27-2015, 01:45 PM

They're redesigning it because the center brace doesn't fit with this exhaust. I've had the V1 since it was released and haven't had my center brace on since then. Patiently waiting for the revised center pipes so I can swap them out and put my brace back on.

Love this exhaust though. I get compliments on it at least every week.

Billit335 · 06-28-2015, 02:57 AM

Tiago is da shit. Get on the ball VRSF. truly great pricing and products.

06-12-2015, 07:18 AM	#683
Tiago@VRSF 2095 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	2-3 weeks before we give them the ok to produce and about 6-8 weeks until production is finished and the product is in hand.
	Appreciate 0 Quote

06-13-2015, 05:32 PM	#687
jlcf22 Lieutenant 100 Rep 502 Posts Drives: 335i09 Join Date: Jan 2012 Location: bakersfield CA iTrader: (0)	Tiago is losing out in money big time, not making inlets and taking forever with the exhaust
	Appreciate 0 Quote

06-14-2015, 01:21 PM	#688
Beemzilla Private 55 Rep 79 Posts Drives: 2009 335i xDrive E90 Join Date: Apr 2013 Location: Saskatchewan iTrader: (0)	Recently installed RBturbos, inlets, VRSF 7" IC, VRSF downpipe, VRSF CP, and a bunch of misc parts along with a incoming tune from BQ/Wedge, only thing missing is a catback... I've been super patient cause I want this exhaust, but I can't wait till snow is on the ground to complete the FBO project on this car.
	Appreciate 0 Quote

06-14-2015, 05:45 PM	#691
Welterweight Major 98 Rep 1,321 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	I went BMW performance a couple months ago with FBO and E85 BQ/Wedge tune. Car sounds amazing!!!! You wont regret it. If this exhaust is ready I may grab it next Spring. __________________ 2009 BSM E92 335xi - RR600's/FBO-VRSF/Apex Arc 8/Wedge E60 MHD/Fuel it Stage 2/BMW PE w/ Dimisa Tips/Alpina TCU/Dinan Springs/RB Inlets/3.5 Bar TMAP
	Appreciate 0 Quote

06-17-2015, 12:20 AM	#694
Beemzilla Private 55 Rep 79 Posts Drives: 2009 335i xDrive E90 Join Date: Apr 2013 Location: Saskatchewan iTrader: (0)	Demand > Supply I wonder if I could just purchase the collector from DP's to single 3.5" and just fab the rest myself. Can someone point me in that direction?
	Appreciate 0 Quote

06-17-2015, 05:05 AM	#695
idratherbesurfing Captain 145 Rep 841 Posts Drives: 2009 e90 335i Lci Join Date: Mar 2014 Location: NJ iTrader: (0)	[QUOTE=Beamzilla;18103541]Demand > Supply I wonder if I could just purchase the collector from DP's to single 3.5" and just fab the rest myself. Can someone point me in that direction?[/ Have a exhaust shop do it...theres usually always one around. And they always have the materials to do it right away.
	Appreciate 0 Quote

06-17-2015, 06:32 PM	#696
Tiago@VRSF 2095 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	This thread is years old and most people don't even realize that it was a review thread for the first version of our exhaust. This is not a teaser thread. The most recent ETA will depends on how long it takes our supplier to provide us with the last component of the build. Once it arrives, we have to finish whatever project is on the lift and we can test/approve this. As of right now, this is high priority. Last edited by Tiago@VRSF; 06-17-2015 at 06:37 PM..
	Appreciate 0 Quote

06-18-2015, 05:05 PM	#697
Milan Captain 202 Rep 649 Posts Drives: F80 M3 Join Date: May 2014 Location: Boise, ID iTrader: (7)	Tiago can you work on an inlet solution for us too? We basically need you to make every aftermarket part available since you are the only one who seems to be able to make a quality product without bending people over in the process. __________________ 17 M3 Comp
	Appreciate 0 Quote

06-18-2015, 07:22 PM	#699
MESSENGERMAN New Member 0 Rep 11 Posts Drives: 08 bmw 335i Join Date: Apr 2015 Location: Milwaukee, WI iTrader: (2)	I'd like to buy this, but debating on how long it will be til its finished. May go the Cobb cbe route.
	Appreciate 0 Quote

06-27-2015, 01:45 PM	#703
Hokie_BMW Captain 59 Rep 661 Posts Drives: 2009 335i Sedan Join Date: Apr 2013 Location: NC iTrader: (0)	They're redesigning it because the center brace doesn't fit with this exhaust. I've had the V1 since it was released and haven't had my center brace on since then. Patiently waiting for the revised center pipes so I can swap them out and put my brace back on. Love this exhaust though. I get compliments on it at least every week.
	Appreciate 0 Quote

06-28-2015, 02:57 AM	#704
Billit335 Private First Class 35 Rep 152 Posts Drives: 07 335 Join Date: Aug 2014 Location: Texas iTrader: (1)	Tiago is da shit. Get on the ball VRSF. truly great pricing and products.
	Appreciate 0 Quote