[minicrazy592]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

I bought these for my 335i, but decided against the black on black theme, so for sale they go!

Freshly powder coated black, no curb rash, minor scratches on the inside, and not much else.

The rims, tires, and TPMS are off of a 2011 E90 M3. Tires have about 85% on the fronts and 40% in the rear. The P.O. had a little too much fun with the rears, hence them being more worn.

The tread depth at the lowest on the Fronts is 5.9mm (Outside) and highest 6.40mm (Inside). The rears are 4.08 (Outside), 2.86mm (Middle), 5.18mm (Inside). The new tread depth for both fronts and rears are 7.14mm.

There's a plug in one rear tire, but no leaks to report of.

What you see is what you get.

$1,450 obo Located in Austin, TX, $1,550 shipped.










Fronts:



Rears:

















Thanks for looking!

[Danny Weikel]

I have 08 335xi coupe and wanted to make sure these have the correct offsets for my vehicle? I would assume so since you bought them for 335i. What are the tire sizes? I see the rears must be 265's but couldn't see the fronts?

[minicrazy592]

245/35R19 -Fronts
265/35R19 -Rears

I do not know if the IX has different wheel fitment capabilities from the standard 335i, but they did fit on my M-sport Sedan. The offset on these are: +29 F / +23 R. I imagine someone, somewhere on this forum has tried to put them on their IX, so a quick search should give you an answer.

[christopherwperry]

are you considering shipping?

[minicrazy592]

I can, but it isn't included in the price.

[minicrazy592]

Bump

[minicrazy592]

Price drop!

[minicrazy592]

Bump for a shipped price.

[crazyinp]

How is the fit on non m? any rubbing?

[minicrazy592]

Rear fenders should be rolled, but that being said, I think you could get away without rolling if you don't have passengers in the rear. So minimal rubbing.

[JLWB3]

would fitment work on a e92? Please PM best price shipped to 02186

thanks!

[e46m3harry]

do you know what powder coat manufacturer was used and what the color code for the powdercoat is?

thanks

[minicrazy592]

Originally Posted by JLWB3

would fitment work on a e92? Please PM best price shipped to 02186

thanks!

I would imagine it wouldn't be too different from the E90. I'll PM shortly.

[minicrazy592]

Originally Posted by e46m3harry

do you know what powder coat manufacturer was used and what the color code for the powdercoat is?

thanks

I do not know. I bought them like this. All I can tell you is that they're a glossy black and have survived a few accidental strikes with a wrench.

[jlacroix21]

do you have any more picture with the rims on your car? I am contemplating putting them on a black e90 and want to see what they look like. Is your 335 lowered in those picture? and just to verify you rolled your rear fenders for fitment correct?

[GetzE90]

Will you sell just the rims?
If so how much? Shoot me a PM
Thanks

[Stevick8]

I will purchase them.

Do you still have them?

[Stevick8]

email me at michael.stevick@gmail dot com

[E92Fonz]

do you still have these!?