Tint Easy To Install?

Marcadelic · 01-28-2010, 09:51 PM

http://www.jlevistreetwerks.com/p182...duct_info.html

Is this stuff worth it? Easy to install?

bsamoul · 01-28-2010, 10:01 PM

Have you chatted with them online and asked them that same question since it's their product?

My experiences with them have been excellent so you should give that a shot.

Spoolin335 · 01-28-2010, 10:14 PM

why not just go to a tint shop and get them to do it? or even better just buy a square piece of tint and do it yourself? the problem with buying precut stuff is you have to position it perfectly to make it work.

when you just buy a big sheet, you put it on then you can cut the extra and viola you done.

ibeclueless · 01-28-2010, 10:28 PM

take it to the tint shop and have them install it.

campbelly · 01-28-2010, 10:37 PM

i have a similar tint i put on my lights..but its from bimmian..lamin-x i think its called...was quite a bitch to put on i must say..its hard because you have to stretch it out while not getting any fingerprints on the inside..thankfully mine turned out fine..but if i was to do it over again i would just go to a tint place and pay the $100 or whatever

Robben@ltbmw · 01-29-2010, 01:41 AM

yepp.. its pretty hard to put on. I only managed to put on the lights on the inner side which is a flat surface. and actually ( a precut one would be harder because you don't get to stretch it, or it will never really fit).

like everyone else say, just use craigslist or go to tint shop and ask them to do it.

SV Concepts II · 01-29-2010, 12:48 PM

It's not that hard to install, just requires alot of patience...

take your time and have a heat gun/ blow dryer ready to iron out any bubbles/wrinkles and you should be fine...

shoot me a PM if you got any other questions.

01-28-2010, 09:51 PM	#1
Marcadelic Instagram: @Marcadelic 243 Rep 2,697 Posts Drives: 335is Join Date: Jan 2010 Location: Tampa iTrader: (4)	Tint Easy To Install? http://www.jlevistreetwerks.com/p182...duct_info.html Is this stuff worth it? Easy to install? __________________ \| New: 2018 F80 M3 \| Old: 335i / 335is \| Instagram: Marcadelic \|
	Appreciate 0 Tweet Quote

01-28-2010, 10:01 PM	#2
bsamoul Major General 165 Rep 7,433 Posts Drives: E90 325i Join Date: Feb 2007 Location: Walnut Creek, California iTrader: (2)	Have you chatted with them online and asked them that same question since it's their product? My experiences with them have been excellent so you should give that a shot. __________________ -Brian 2X 2006 BMW 325i [Electric Red & Mystic Blue] \| ZPP \| V1 \| Rear Fogs \| M3 Lip Spoiler \| EAS RemoteKey \| BMS Powerbox \| Projector90 Headlights w/ LED AE \| LED plate lights \| OEM Blacklines http://www.tech-shine.com
	Appreciate 0 Quote

01-28-2010, 10:14 PM	#3
Spoolin335 Justin Herass 333 Rep 1,205 Posts Drives: X6M / M3 Join Date: Nov 2008 Location: Canada iTrader: (7) Garage List 2015 BMW M3 [0.00] 2012 Audi TTRS [10.00] 2012 BMW X6M [9.00] 2007 BMW 335i [9.00]	why not just go to a tint shop and get them to do it? or even better just buy a square piece of tint and do it yourself? the problem with buying precut stuff is you have to position it perfectly to make it work. when you just buy a big sheet, you put it on then you can cut the extra and viola you done. __________________
	Appreciate 0 Quote

01-28-2010, 10:28 PM	#4
ibeclueless What 141 Rep 9,325 Posts Drives: E92 328xi Join Date: Mar 2009 Location: Quincy, MA iTrader: (1)	take it to the tint shop and have them install it. __________________ E92 328xi Space Gray Aero Lip \| M3 Side Skirts \| CF Performance Spoiler \| ACS Roof \| Gloss Black Grilles \| LUX H8 Angels \| BMW Performance Exhaust My E92 Photos
	Appreciate 0 Quote

01-28-2010, 10:37 PM	#5
campbelly AC Schnitzel 85 Rep 546 Posts Drives: 2006 325xi Join Date: Apr 2009 Location: Toronto iTrader: (3)	i have a similar tint i put on my lights..but its from bimmian..lamin-x i think its called...was quite a bitch to put on i must say..its hard because you have to stretch it out while not getting any fingerprints on the inside..thankfully mine turned out fine..but if i was to do it over again i would just go to a tint place and pay the $100 or whatever __________________
	Appreciate 0 Quote

01-29-2010, 01:41 AM	#6
Robben@ltbmw 118 Rep 2,215 Posts Drives: E90 Space Grey Join Date: Dec 2009 Location: ROSEMEAD, CA iTrader: (4) Garage List 2007 328i [0.00]	yepp.. its pretty hard to put on. I only managed to put on the lights on the inner side which is a flat surface. and actually ( a precut one would be harder because you don't get to stretch it, or it will never really fit). like everyone else say, just use craigslist or go to tint shop and ask them to do it.
	Appreciate 0 Quote

01-29-2010, 12:48 PM	#7
SV Concepts II 269 Rep 6,093 Posts Drives: E90 M3 Join Date: Dec 2008 Location: 1460 White Oaks Rd. Suite F Campbell, CA 95008 iTrader: (7)	It's not that hard to install, just requires alot of patience... take your time and have a heat gun/ blow dryer ready to iron out any bubbles/wrinkles and you should be fine... shoot me a PM if you got any other questions.
	Appreciate 0 Quote