[jammy78]

Hi,

Has anyone seen a guide or can give me instructions on how to wire the under seat subs directly to a 4 channel amp?

I've got a Blaupunkt 475 amp / pnp wiring harness on order but I'll need to wire the subs to the amp.

I've searched but no joy!

Has anyone done this or provide some help?

Cheers

[Hopeful]

I've searched but no joy!

Must try harder - http://www.e90post.com/forums/showthread.php?t=557026

[makkan00]

Jammy
Firstly check which clips do you have for the underseats? pre-LCI or LCI.
And based on what you have, its simply running new wires to the sub and have OEM / after market clips to connect these.

[jammy78]

Originally Posted by Hopeful

Must try harder - http://www.e90post.com/forums/showthread.php?t=557026

Cheers.... but that just confused me!?

Originally Posted by makkan00

Jammy
Firstly check which clips do you have for the underseats? pre-LCI or LCI.
And based on what you have, its simply running new wires to the sub and have OEM / after market clips to connect these.

So is it just a case of:

1. Unplug the current wiring to the subs
2. Plug in new wiring into the subs & run to amp?

Simple as this?

Cheers

Ps will coding to hifi be needed?

[blues n twos]

Originally Posted by jammy78

So is it just a case of:

1. Unplug the current wiring to the subs
2. Plug in new wiring into the subs & run to amp?

Simple as this?

Cheers

Ps will coding to hifi be needed?

The hardest bit will be running the cables from the amp

No coding required I believe either but yes it's jus a matter of hooking up the wires from the amp to the subs.