|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Wheel fitment, mv2 on an e93?
|
|
04-24-2012, 01:20 PM | #1 |
Lieutenant
63
Rep 438
Posts |
Wheel fitment, mv2 on an e93?
Hi guys, desperately need a spare so I can get a wheel refurbed and have seen a cheap 19" mv2 alloy, would this fit an e93? Any help appreciated.
Thanks Che
__________________
YMB M4
E93 320d Msport - sadly gone to the salvage yard. |
04-25-2012, 04:34 AM | #2 |
Major
111
Rep 1,487
Posts |
I don't believe so, the fronts are ET47 & rears ar ET50, they will sit very far into the arch and touch the shock absorber or brake caliper I imagine. A 15mm spacer would bring the front down to ET32 and the rear down to ET35 which should work but obviously I cannot guarantee. I think the E46 used the same 72.6mm centre bore and the stud pattern for the 3-Series has been 5x120 for ages so that should also match.
I have a set of 15mm spacers for sale in the 'for sale' section at present, virtually new with extended bolts and lockers if they'd be of interest. |
Appreciate
0
|
04-25-2012, 09:02 AM | #3 |
Lieutenant
63
Rep 438
Posts |
Thanks for the response jay, I'll just keep an eye on eBay for an e90 wheel then, I just needed something to be on the car for a day whilst the wheel was refurbed. Have a set of 16" z4 wheels and tires in the garage but they wont fit because of the metal surround behind the disk. Hopefully someone will sell one soon, can be kerbed to bits or anything as long as its got a tyre on lol
__________________
YMB M4
E93 320d Msport - sadly gone to the salvage yard. |
Appreciate
0
|
Bookmarks |
|
|