Sponsored by The Tire Rack

[$exy_Dirty]

Hello,

Im considering to get new wheels, I dont know much about the specs for the proper fitment, just have an idea of what style I want to get. Looking at BBS CH or CK rims.

I have a 09 LCI e90, none sport package, 205/55/16.

What is the factory offset on my wheels?

Found a set of BBS CH brand new, black with these specs. Will that work perfect?

Front - 19 x 8.5 et 35
Rear - 19 x 9.5 et 33

Thanks

[MonacoBlueE90]

You get pretty much this kinda look with 235/35/19 and 265/30/19 tyres http://www.e90post.com/forums/showpo...08&postcount=2, but it's possible that you could need some fender rolling at rear. Especially if you lower it. Also i think your current wheels are 16x7 et34.

[somedude]

As far as the stock offsets go I do not know but I also have the exact same car you have and the 19X9.5 et33 in the rear worked perfectly. I actually lowered my car on H&R springs/Koni Yellows and do not have any rubbing issues. On the front I could have safely gone with 19X8.5 et30 but decided to go with et40 now I at least a 10mm spacer.

[Eat.Sleep.Race]

Originally Posted by $exy_Dirty

Hello,

Im considering to get new wheels, I dont know much about the specs for the proper fitment, just have an idea of what style I want to get. Looking at BBS CH or CK rims.

I have a 09 LCI e90, none sport package, 205/55/16.

What is the factory offset on my wheels?

Found a set of BBS CH brand new, black with these specs. Will that work perfect?

Front - 19 x 8.5 et 35
Rear - 19 x 9.5 et 33

Thanks

Yes those specs will work fine, might even want to run a 10mm front spacer for better fitment, i run same sizes you want but with 12mm front spacer and 5mm rear, rubbing on huge bumps only and I'm lowered 2.2inches.

[$exy_Dirty]

Thank you for your inputs, what would be the best flush size without using spacers? Also Im not planning to lower the car anytime soon, but want size that wont be an issue if I do drop it a few inches in the future.