[beamermaniac]

Hello.

I own a car without navigation. Now I have started to install CIC Professional with Combox Telematic. I only have a problem with one pin in the Combox, which is specified as TEL WAKE UP - 15 PIN. The wiring diagram in ISTA does not show where it is plugged in.

Thanks for replies.

[TSilver335i]

Originally Posted by bartek16nd

Hello.

I own a car without navigation. Now I have started to install CIC Professional with Combox Telematic. I only have a problem with one pin in the Combox, which is specified as TEL WAKE UP - 15 PIN. The wiring diagram in ISTA does not show where it is plugged in.

Thanks for replies.

Doesn't matter as telematics are not available anyway. At least in the US, Australia.

You said it's pin 15 on the combox connector which is correct. Are you going from TCU? or?

[beamermaniac]

Originally Posted by TSilver335i

Doesn't matter as telematics are not available anyway. At least in the US, Australia.

You said it's pin 15 on the combox connector which is correct. Are you going from TCU? or?

Yes, It's PIN 15 in Combox pinout (full yellow). I have almost full wire for that with antennas cables (Shark + Bluetooth + Emergency). I would like to retrofit as factory thats why I am asking for location of this cable.



From this coupling I don't have further wires.
I checked wiring diagram and I know what should be there.

2 PINs to emergency speaker under console
1 PIN - +12V from fuse box
1 PIN - from Airbag module informs you about accident
1 PIN - missing called (Tel Wake Up - 15) which I don't know where connect.

I especially care about SOS function - in EU is probably still working.

Sorry for my English. I haven't spoke/written long time.
I think together we find right place to connect it as factory.

[3star1]

Hello Guys I have a 2008 X5 with nav no bluetooth want to install Bluetooth no harness connectors in Lug Compartment any help will be appreciated, New to the site Thanks

[ctuna]

Mr12volt has two types of devices that go through the most bus.
Don't require and extensive wire harness if you don't have one.
Cars made up to and including 09 should have a pre wiring wiring
harness for the factory stuff at least they do in the E90 in the US.

In the E90 this stuff is under the trunk or rear floor behind the rear
passenger seats.

https://www.mr12volt.com/collections...-interface-dsp

[3star1]

Thanks a bunch I will get in touch with Him

[beamermaniac]

Hello. Any ideas?

# okay i found this pin is going to CAS Pin 37!

Subject closed.