|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
E90 Misfire code
|
|
10-27-2012, 05:47 PM | #1 |
Registered
0
Rep 1
Posts |
I'm having a little problem with my 07 BMW 328i (e90/N51). Two weeks ago i started my car and noticed a rough vibrate on idle + the service engine soon light came on... I took the car to my mechanic and the ODB reader showed a misfire in cylinder #6... He switched the coil from cylinder #6 to cylinder #2 and the ODB showed misfire in cylinder #2... So the problem was the coil... He changed the coil and there were no problems with the car anymore
One week later the same symptoms... ODB showed misfire in cylinder #4 and #6... Problems with the coils again... Bought new coils, replaced all spark plugs... CAR IS RUNNING GOOD... Erased the codes ... Checked for new codes and it's still bringing up a misfire in cylinder #4... If I put a bad coil in cylinder #4 the car is vibrating on idle ... When I put the good coil everything is just fine but it's still bringing a misfire in that cylinder in ODB...It doesn't make any sense to me What kind of problem it might be?...Can somebody help me with a plausible answer??? |
Bookmarks |
|
|