[WOT Bimmer]

I recently installed a set of xenon lights with morimoto projectors, ddr HID kits, and orion V4 AEs, and I need some help getting the car coded. The car is a 2007 328xi sedan. Everything is working fine, but I am getting the following errors whenever I turn the headlights on:

CCID 88: yellow low beam icon
CCID 89: yellow low beam icon
CCID 231: red car on lift

Perhaps someone would suggest something different, but I personally would just like to get the car coded so that it doesn't do a front bulb check. If a bulb is out I will know it, so I really don't need the car to check it for me.

If someone would be willing to help me out with this I would greatly appreciate it. From what I have read it is an easy fix, I just don't know how to do it. I am certainly willing to compensate you for your time.

Please PM me!

[DRock3d]

I know how to do this, but I've never done much coding. All I've done so far is digital speedo, so if nobody else chimes in I'd be willing to give it a shot.

[WOT Bimmer]

Originally Posted by DRock3d

I know how to do this, but I've never done much coding. All I've done so far is digital speedo, so if nobody else chimes in I'd be willing to give it a shot.

Here is a link with some more info: http://www.e90post.com/forums/showthread.php?t=623805

So, you think you would be comfortable coding the front bulb check off? Do you feel that is the most logical solution?

Btw, can you do corner delete too?

[DRock3d]

I've never done anything with changing the VO but it looks pretty straight forward. Not super confident though so I was hoping someone with more experience would chime in. If they don't I would be willing to take a stab at it.

[WOT Bimmer]

Originally Posted by DRock3d

I've never done anything with changing the VO but it looks pretty straight forward. Not super confident though so I was hoping someone with more experience would chime in. If they don't I would be willing to take a stab at it.

Look for a PM from me.

[pweber84]

Originally Posted by WOT Bimmer

I recently installed a set of xenon lights with morimoto projectors, ddr HID kits, and orion V4 AEs, and I need some help getting the car coded. The car is a 2007 328xi sedan. Everything is working fine, but I am getting the following errors whenever I turn the headlights on:

CCID 88: yellow low beam icon
CCID 89: yellow low beam icon
CCID 231: red car on lift

Perhaps someone would suggest something different, but I personally would just like to get the car coded so that it doesn't do a front bulb check. If a bulb is out I will know it, so I really don't need the car to check it for me.

If someone would be willing to help me out with this I would greatly appreciate it. From what I have read it is an easy fix, I just don't know how to do it. I am certainly willing to compensate you for your time.

Please PM me!

It is peace of cake to turn off the bulbs testing. You don't need to change any VO.

NFRM:

WARMUEBERWACHUNG_AL
nicht_aktive
WARMUEBERWACHUNG_AL_L
nicht_aktive

KALTUEBERWACHUNG_AL
nicht_aktive

[WOT Bimmer]

Originally Posted by ******84

It is peace of cake to turn off the bulbs testing. You don't need to change any VO.

NFRM:

WARMUEBERWACHUNG_AL
nicht_aktive
WARMUEBERWACHUNG_AL_L
nicht_aktive

KALTUEBERWACHUNG_AL
nicht_aktive

Thanks! I think I am going to DIY this after all. I would really like to learn how to do it.

[pweber84]

No problem.
If you have OBD USB cable you will do it easlie.

[WOT Bimmer]

Originally Posted by ******84

No problem.
If you have OBD USB cable you will do it easlie.

Bought one last night.

[pweber84]

Originally Posted by WOT Bimmer

Bought one last night.

Let me know if you don't have a software, I will share it for you.