|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Ask a Professional Detailer...
|
|
02-03-2008, 04:27 PM | #353 | |
Lieutenant Colonel
34
Rep 1,507
Posts |
Quote:
I will try to use MF towel to get rest of water if there's any around bolt areas. About the tire shiner, I've been having hard time using this after wash. Whenever I use it after the car wash, like you said, the tire shiner gets on small portion of wheel and body that's been cleaned already. I was just curious if I can do it at very beginning of the car wash and wash the car so that I don't have to worry about tire shine at the end. Sorry if things didn't make sense. Thanks for all the replies! |
|
Appreciate
0
|
02-04-2008, 09:42 AM | #354 |
Long Time Admirer, First Time Owner
18073
Rep 9,380
Posts |
One option to avoid the overspray is to spray the product on an applicator pad and wipe it onto the tires. Greatly controls the amount of product you use, and saves you that re-wipe of the rims.
|
Appreciate
0
|
02-04-2008, 09:51 AM | #355 | |
Lieutenant Colonel
34
Rep 1,507
Posts |
Quote:
i am curious if there's something out there that absorbs less of this tire shine |
|
Appreciate
0
|
02-04-2008, 11:01 AM | #356 | |
360
Rep 5,052
Posts |
Quote:
Regarding the tire shine, I never recommend spraying tire shine directly onto the tires, that is asking for additional work in cleaning up the over spray. I recommend using a water based dressing that will be absorbed into your tires, avoid using a silicone based product. I simply dispense a little on a tire applicator pad and wipe it around the tires. No excess product is used, and you don't have to worry about it getting on your wheels or paint. If you do it at the beginning of the wash, I'd be worried that it would come out uneven or you'd wash some of the product off, which seems like a waste to me. Hope this helps clarify some things. George |
|
Appreciate
0
|
02-04-2008, 03:24 PM | #357 | |
Lieutenant Colonel
34
Rep 1,507
Posts |
Quote:
and yes, it's wet/dry vac i will look out for water based tire shiner. |
|
Appreciate
0
|
02-11-2008, 12:47 AM | #358 |
First Lieutenant
15
Rep 354
Posts |
I want to know what I can do to make my car look better if I do not have a polishing machine. Right now I'm thinking all I can really do without a polishing machine is a wash > clay > sealant > wax? What else can I do to minimize/hide some of the swirl marks (don't have much because I always properly follow the correct way to wash the car). My car is metallic black.
Finally I would also like to know before I do this detail, do I need to strip my car of old wax? Because starting from spring I want to do a wash > wax routine every month or so. Do I need to remove wax before I rewax the car everytime? Thanks.
__________________
2007 E92 328xi sapphire black / black leatherette / step / premium / iDrive / sport seat / pdc / GP thunder angels / 35% tint / matte black grille / 6000k hid fog / 6000k D1S / led license plate / painted reflectors / m3 spoiler
|
Appreciate
0
|
02-11-2008, 07:21 AM | #359 | |
360
Rep 5,052
Posts |
Quote:
The routine you outlined looks pretty good. To help hide the imperfections without removing them with an abrasive polish, you could turn to a glaze to help hide and fill in some of the lighter swirls and imperfections. Glazes typically have clay and oil based fillers that will attach themselves to the dips and valleys (swirls and scratches) to help give the appearance of better looking paint. A good glaze to use under a sealant is Menzerna Finishing Touch Glaze. You help prolong the durability of the glaze by topping it with a sealant as you said. The wax will help enhance the depth and gloss of the paint. Remember, for optimal durability and results, let your sealant cure for 24 hours before applying the a second coat or topping it with the wax. What I usually recommend is to perform the wash > clay > glaze > sealant. Then a week (or few days) later, wash your car and top it with the wax for the first time. This way your sealant will properly cure and you'll get the maximum durability out of your glaze and sealant. I'd recommend stripping your previous coats of protection to ensure maximum results before your first major detail. I'd recommend giving your vehicle a wipe down with a 50/50 mixture of isopropyl alcohol and distilled water. This will break down any sealant or wax still remaining on your paint. As you wash and clay it will make sure that nothing else is left on your paint and you'll be starting with a fresh base. If you have any other questions or need a hand selecting some products, please do not hesitate to ask. Keep us posted on what you end up using and how things turn out for you. George |
|
Appreciate
0
|
02-18-2008, 01:09 PM | #360 | |
Captain
106
Rep 728
Posts |
George,
What is the right way to strip the existing coats of protection? I heard Klasse All In One (AIO) does the job? Or can we simply use Menzerna Final Polish II to do the same? Assuming the latter, will clay bar still remove the surface contamination if you have existing coats of wax on your car, since the processis is Wash -> Clay -> Polish -> etc. Thanks, orionredwing Quote:
__________________
PROcede | AMS FMIC | AR Catless DPs | AR Oil Cooler | BMS DCI Wavetrac LSD | KW V3 w/ Swift Springs | M3 Front Suspension |
|
Appreciate
0
|
02-18-2008, 03:24 PM | #361 | |
360
Rep 5,052
Posts |
Quote:
Isopropyl Alcohol & Water wipedown Wash with Dawn detergent Using a clay bar will remove most, if not all of the protection Using any abrasive polish (including Final Polish II) Using any chemical cleaner (including Klasse AIO) Yes, claying your vehicle will still remove surface contamination even if there are existing coats of protection on the paint. It will probably remove the coats of protection, but it properly prep the paint and remove embedded contamination. If you want to remove the coats of protection prior to any of the detailing steps, I usually recommend using the isopropyl alcohol wipe down to do so. Otherwise, between claying your paint and polishing, you'll certainly have no protection remaining by the time you are ready to re-apply your favorite sealant or wax. George |
|
Appreciate
0
|
02-18-2008, 07:28 PM | #362 |
Captain
106
Rep 728
Posts |
Oops, my questions have been so focused on finding ways to remove my light swirls, that I forgot to ask. Do you use Menzerna Final Polish II on the entire car, or just the areas where you want to remove light swirls?
Since the FPII is a light abrasive polish vs a chemical non-abrasive polish, I wasn't sure if I needed to use FPII on the whole car? My process recap: Wash -> Clay -> Polish (FPII) -> Glaze (FTG) -> Seal (EX-P) -> Wax (Meguiar #26) I understand it's the polishing step that brings out the inherent shine in the car? As a result, am I missing a chemical polish step on my non-swirl'd areas to bring out the shine, or will the glaze, seal, and wax do the job? If the latter, which product I listed above actually brings out the shine (Glaze, Seal or Wax)? Per your guide, glazing fills slight imperfections, seal just protects but adds no inherent shine(?) and wax brings out the wet look, but is not primarily responsible for the shine? Eesh, seems the more I read, the more confused I get
__________________
PROcede | AMS FMIC | AR Catless DPs | AR Oil Cooler | BMS DCI Wavetrac LSD | KW V3 w/ Swift Springs | M3 Front Suspension |
Appreciate
0
|
02-19-2008, 09:17 AM | #363 | |
360
Rep 5,052
Posts |
Quote:
Polish will remove surface imperfections, allowing light to reflect your true finish of your paint. Glaze will help hide some imperfections and add more gloss to your paint. Sealants will add durable protection and can enhance the shine and reflectiveness of the paint. Waxes add another layer of protection and can enhance the depth and gloss of the paint. Hope this helps clear things up for you. George |
|
Appreciate
0
|
02-20-2008, 07:39 PM | #364 |
Kimber in da Trunk
1
Rep 36
Posts |
Hello again
So after full detail which is wash, clay, chemical cleaner, and sealant I'm stuck to which wax I should use??? Souveran Paste Wax or Pure Carnauba Wax??
The wax would be use every time I wash the car and full detail 2x a year. So which wax do u recommend? beyond the one that I listed above plz |
Appreciate
0
|
02-22-2008, 11:05 AM | #365 | |
360
Rep 5,052
Posts |
Quote:
Keep in mind to maintain this look, you'll want to reapply your wax every 3 - 6 weeks, which is about how long the waxes will last. George |
|
Appreciate
0
|
02-23-2008, 06:20 PM | #366 |
New Member
0
Rep 21
Posts |
Help Cleaning Around Window
George,
I purchased a few products from you a few months back. I did my first major detail job, and I can't seem to clean up the black outline of the window where the front door meets the rear door. I'm not too sure of the material, but again it's part of the door. It has what looks like smudge marks on it and I've tried cleaning it with spray and swipe, a MF cloth with soapy water, and it won't clean up. Any recommendations? Hopefully I explained the piece that I'm having a problem with. Thanks in advance! Rock |
Appreciate
0
|
02-25-2008, 09:01 AM | #367 | |
360
Rep 5,052
Posts |
Quote:
I'd first try prepping the surface with some isopropyl alcohol and distilled water to see if that puts a budge on the smudges. Then I'd try a safe all purpose cleaner, like P21S Total Auto Wash, which is a paint safe citrus degreaser. It will also work on plastic, vinyl, carpet, and much more, so I know it'd be safe for cleaning the area you are talking about. If that doesn't do the trick, some sort of chemical cleaner or polish might be my next resort. George |
|
Appreciate
0
|
02-27-2008, 05:00 PM | #368 |
Lieutenant Colonel
252
Rep 1,869
Posts |
Hey i have a question. I have a Jet Black 335xi.
-It is about 1 year old. My products im about to buy are.... -Zaino ZPC for a polish -Zaino Z2 Pro for a sealant Do you think those two products will do well with Jet Black? If not what products do you recondmend for a my Jet Black Car? I want a nice SHine =) Also, What kind of Clay do you recommend? And what kind of Quick Detailer and Other Products do i need with Clay? What Should i use to apply the Polish and Sealant by hand? A MF Towel? Polish Pad? Terry Towel? Thank you! P.S. PLease PM Me i would like to buy some products from your site and i see in your sig. that there is a 10% discount for us here on e90post.com |
Appreciate
0
|
02-28-2008, 12:50 PM | #369 | |
360
Rep 5,052
Posts |
Quote:
When it comes to applying a polish or sealant by hand, I usually turn to a standard foam applicator pad. These seem to work well when trying to break down a polish by hand, compared to a MF applicator pad, and best of all they are pretty cost effective. For product removal, I'd suggest investing in some quality microfiber towels. I turn to our all purpose microfiber towels when it comes to removing polishes, sealants and wax. For quick detailing I like a thicker nap towel, but for product removal, a medium nap is what I look for. If you have any other questions or need a hand selecting any products, please do not hesitate to ask. George |
|
Appreciate
0
|
02-28-2008, 04:07 PM | #370 |
Registered
0
Rep 4
Posts |
How to choose a good detailer?
My apologies if it's already been covered, but what are some things to look for when choosing a professional detailer? Are there questions I should be asking? I'm a newbie so any help would be great.
Also, does anyone have recommendations for a good detailer in the San Jose area? |
Appreciate
0
|
03-02-2008, 09:15 AM | #371 | |
360
Rep 5,052
Posts |
Quote:
Try to research parts of the detail yourself before going and looking for a detailer. The more knowledgeable you sound going to him, the clearer your expectations will be. I'd suggest reading over our auto detailing guide to learn about the major detailing steps and you can generate some questions off of your reading, like how does he wash the vehicle, will they use a clay bar, what does he plan on topping the car with a sealant or wax, etc. If you have any specific questions, please do not hesitate to ask. George |
|
Appreciate
0
|
03-05-2008, 12:50 PM | #372 |
Brigadier General
379
Rep 4,320
Posts
Drives: '07 Z4 M Coupe
Join Date: May 2006
Location: Metro-Detroit
|
George,
When you have a chance, could you read this. I have a few more questions as well. - Is there much of a difference in the lubricity (if that's the right word) between the Zaino wash vs. Poorboys, CG, etc? - I know you like the Poorboys APC for the tires and engine. Is that safe for the stock wheels, or will it damage them? - I know I should know this; but when I clay my car, will that pull off the existing layer of Zaino? For anyone who knows this... When detailing the engine, exactly which components on the E9x need to be covered/protected from the water?
__________________
|
Appreciate
0
|
03-05-2008, 12:59 PM | #373 | |
360
Rep 5,052
Posts |
Quote:
Regards, George |
|
Appreciate
0
|
03-05-2008, 11:05 PM | #374 |
Long Time Admirer, First Time Owner
18073
Rep 9,380
Posts |
I had no problems after using PoorBoys on the stock wheels, and the runflats look pretty sweet when cleaned with it.
|
Appreciate
0
|
Bookmarks |
|
|