[ddogg35]

Another +1 on the prep
i usually just use turtle wax metalic every so often between details and a coat of Black Light as a sealent.
http://www.detailedimage.com/Ask-a-P...ys-blacklight/
I had an hour to spare last sunday so i gave it a once over with black light:

[davidmleckie]

Ive been using Collinite 476 for a few years and really cant fault it, ive tried dozens of others and some have been good and some bad but i always come bact to the Collinite. Have a look on youtube for Collinite and youll see some good results. Its also very reasonably priced and lasts ages.
http://www.theultimatefinish.co.uk/c...-coat-wax.aspx

[MattOz]

Originally Posted by davidmleckie

Ive been using Collinite 476 for a few years and really cant fault it, ive tried dozens of others and some have been good and some bad but i always come bact to the Collinite. Have a look on youtube for Collinite and youll see some good results. Its also very reasonably priced and lasts ages.
http://www.theultimatefinish.co.uk/c...-coat-wax.aspx

+1.

I've been using Collinite 476S for a few years and it's a great, hard wearing wax. very reasonably priced too.

Here's a 996 I did recently, finished with 476S



and my M3, some 3 months after its last application of 476S. Still beading nicely.