[ZROFCKSGVN]

Originally Posted by SCSRe92

does this qualify as concave?

the OEM look

[bmbarclay]

Originally Posted by GILMORE

Avant Garde M359 19x9 +35 & 19x10 +38

more pics please!

[Verbiage]

Great looking cars!

Alufelgen SF-71
19x8.5 et15
19x9.5 et20

[Mr Singh]

Do I qualify?

[CarEnthused]

Originally Posted by Mr Singh

Do I qualify?

Yup. What wheels?

[stuart-b]

Want to drop but the roads are terrible over here. Need an X6 rather than this... I even ground sometimes on speed bumps and my own garage. Cant even park most places as the parking spaces are above the kerbs on the sidewalks... bad times.

[JET335]

Originally Posted by bbarclay410

more pics please!

here are a few more pics
http://www.e90post.com/forums/showthread.php?t=848324

[TrueLoyaltyInc]

This is an old pic.... And new preview pic... more pics still pending...

[spiike32]

I suppose my wheels are a little concave...



Track day 7/29/13 at Autobahn Country Club:


Here's a vid of what Morr vs8.2's look like while spinning during one of my track sessions (view in 1080p). I didn't post the rear wheel vid since you can't even see the center of the wheel with the gopro. Wheels look sick when you go 5-20mph, and in person you can see the spokes make X's which the gopro clearly pics up. Also because the inside spins faster than the spokes, the concavity makes a pretty wicked optical illusion which you can see in person especially when slowing down.

[CPWINCH]

Morr VS8.2

[dbudh001]

Originally Posted by hawaiianeze

Forgestar F14 Super Deep Concave

this right here is FAP material
i dont mean to move away from the topic, however, this car and rims have gotten more likes, than any other set up that have been posted...
how the hell do we get these to fit our car... same offset and everything?

someone please tell me what to do

[spiike32]

Sell your car and get an M3 or replace your quarter panels with wider M3 quarter panels, hood, front bumper, fender liner, and maybe headlights. It's been done before search for the "poor man's m3" thread.

[OvalsE92]

Originally Posted by spiike32

Sell your car and get an M3 or replace your quarter panels with wider M3 quarter panels, hood, front bumper, fender liner, and maybe headlights. It's been done before search for the "poor man's m3" thread.

I SAW YOU in schiller park by the train

[Agent11br]

Originally Posted by Mr Singh

Do I qualify?

It's hard to beat clean e91's
OEM 359's?

[Mr Singh]

Originally Posted by Agent11br

It's hard to beat clean e91's
OEM 359's?

Thanks man, yeh OEM 359s finished in BMW ferric gray with some aggressive spacing.

[spiike32]

Originally Posted by OvalsE92

I SAW YOU in schiller park by the train

lol yep! (metra or CTA? I was at both stations). I'll be by the Rosemont CTA station more often on Fridays now. Flag me down next time, I'd love to see your ride.

[hawaiianeze]

Originally Posted by spiike32

Sell your car and get an M3 or replace your quarter panels with wider M3 quarter panels, hood, front bumper, fender liner, and maybe headlights. It's been done before search for the "poor man's m3" thread.

Or just run 19x9.5 et 20 in front with 235/35/19 and call it a day

[DEVN335]

can I try?

[Dcara]

Originally Posted by DEVN335

can I try?

What's wheels are those? I can't find them on the mrr site

[spiike32]

Originally Posted by hawaiianeze

Or just run 19x9.5 et 20 in front with 235/35/19 and call it a day

Hawaiianeze that is true... but you disappoint me!!

dbudh001 asked what he can do for EXACT spec as Malek's M3 with "same offset and same everything." This is not easy on a non M because Malek is running freaking Forgestar f14 SDC in the front that are 19x10 which also require camber plates to even clear the brakes. 9.5's wont be as concave as the 10 which dbudh001 will need to achieve the same level of concavity. On a 335 I believe that wheel will rub on the oil cooler vent, coilover spring, brake caliper, and fender.

So to accurately answer dbudh001 below really is to do what I posted since unfortunately we can't pull the front fender on his 335i.

Originally Posted by dbudh001

how the hell do we get these to fit our car... same offset and everything?
someone please tell me what to do

Originally Posted by Malek@MRF

Front is 19x10. Wheels will not fit without the use of camber plates as factory camber is not adequate and will severely rub and/or damage the thermoplastic fender.

As mentioned above, the wheels need camber plates to work and modification to the fender liners to work. Very soon I will disclose all specification for these wheels along with what it takes to make them fit.

Tested these wheels for BBK fitment long before they were mounted on the Melbourne Red and Jet Black car. They clear the BBK setups.

Quoted from this thread: http://www.m3post.com/forums/showthr...=846147&page=2

[hawaiianeze]

Originally Posted by spiike32

Hawaiianeze that is true... but you disappoint me!!

dbudh001 asked what he can do for EXACT spec as Malek's M3 with "same offset and same everything." This is not easy on a non M because Malek is running freaking Forgestar f14 SDC in the front that are 19x10 which also require camber plates to even clear the brakes. On a 335 I believe that wheel will rub on the oil cooler vent, coilover spring, and fender.

So to accurately answer dbudh001 below really is to do what I posted since unfortunately we can't pull the front fender on his 335i.

Didn't see that part but regardless of width all SDC have the same concave for non m cars though deep concave in front and SDC in rear looks better I think

[Dcara]

Originally Posted by hawaiianeze

Didn't see that part but regardless of width all SDC have the same concave for non m cars though deep concave in front and SDC in rear looks better I think

Still need a fair stretch and poke for that setup on non m