[jlcf22]

knob question I just ordered d+Kcan cable from ebay it came with a cd but its cracked do I need the cd? or can I just download the software from this thread? thanks

[Digitalism]

I believe cd would be the drivers for the cable.

Try and plug in the cable and see if it automatically installs.

[skatz1922]

Originally Posted by jlcf22

knob question I just ordered d+Kcan cable from ebay it came with a cd but its cracked do I need the cd? or can I just download the software from this thread? thanks

Exactly. Use the CD to only install the drivers for your cable. Use the software that is on this thread for the install. Trust me, I spent a day trying to get the software from a cd to work and ended up installing the one on this thread. Worked like a charm and it was hassle free.

[7smurfs]

Bumping this thread but can N54s use a Bosch injector?

[DR-JEKL]

Originally Posted by 7smurfs

Bumping this thread but can N54s use a Bosch injector?

No!

[bavaddict]

Review and feedback on Rock Auto injectors here @ http://www.e90post.com/forums/showth...9#post18451559

[MJ80.]

Is it absolutely nessacary to use a 32bit win xp or win 7 laptop to code the injectors? Having a tough time tracking a laptop down that still runs win 7 and is also 32 bit that i can borrow. Everyones on at least windows 8 or 10 already.

[cam99]

If I replace an injector with the same or close injector parameters doe the Injector still need to be coded?

[Shamza]

Originally Posted by cam99

If I replace an injector with the same or close injector parameters doe the Injector still need to be coded?

If exactly the same, no, otherwise it depends how big the difference is. INPA will sometimes round up or down by a couple of increments when coding them.

tbh, INPA really isn't that hard to get hold of or use.

[lalord69]

will this work on a 08 335i e93?

[lalord69]

can i reset the transmition adaptations with the files included in the zips?
or i need to find a full version of inpa/ediabis?

i already code my injectors and this guide worked like a dream!!!

[vasillalov]

Originally Posted by lalord69

will this work on a 08 335i e93?

Yes

[vasillalov]

Originally Posted by lalord69

can i reset the transmition adaptations with the files included in the zips?
or i need to find a full version of inpa/ediabis?

i already code my injectors and this guide worked like a dream!!!

Not sure about the TCU adaptations. It should work as all of the E9X .ipo files are there. Give it a try.

[Mcdougal]

Will this work on an 09 535i? I read somewhere that 09+ models won't wirk with inpa but I'm hoping I misinterpreted the data.

[JDuke335i]

Originally Posted by Mcdougal

Will this work on an 09 535i? I read somewhere that 09+ models won't wirk with inpa but I'm hoping I misinterpreted the data.

I have a 09 335i and the dcan cable / INPA works fine . As far as coding other modules it works fine as well . I can't code nor update any module on the most ring , I have to get icom for that but injectors and everything else should work just fine

[Dann]

I changed my injectors yesterday and coded them using a D-Can cable and had no issues

[Mcdougal]

^^ thanks!

[Boss777]

is any one local am in portland oregon looking for coding one.
my just give up and it misfires so bad please pm me am local and can still drive i cant get inpa working on 64bit please help

[harshagaddam]

Hi vasillalov,

I got below error, when i try to connect to my vehicle. try to read fuel injector values.
Can you please suggest me in right direction.

EDIABAS-Error
ApiResultText: Error #95
SYS-0005: OBJECT FILE NOT FOUND
API job error or no such result!
Continue script processing?

YES NO

[vasillalov]

The zip file contains a PDF with common EDIABAS errors and what could be wrong. Search inside that PDF and hopefully you'll find a solution.

[harshagaddam]

Hi Vasillalov,

i got these solutions from PDF. but i have below questions.


Solution 1: Copy the SGBD into the Ecu directory. (Where can i find SGBD)
Solution 2: Copy the group file to C:\EDIABAS\ECU (Where can i copy group files)

Can you please suggest.



1.8 EDIABAS error: Error (95) SYS-0005: OBJECT FILE NOT FOUND
Reason 1: No SGBD in C:\EDIABAS\ECU
Solution 1: Copy the SGBD into the Ecu directory. (Where can i find SGBD)
Reason 2: No group file in C:\EDIABAS\ECU (for group call)
Solution 2: Copy the group file to C:\EDIABAS\ECU (Where can i copy group files)
Reason 3: No path definition C:\EDIABAS\BIN
Solution 3: Set the system variable (see 2.1)
Reason 4: Incorrect path definition in EDIABAS.INI
Solution 4: Set the EcuPath path in Ediabas.ini to C:\EDIABAS\ECU
Reason 5: The SGBD name contains reserved characters or is too long. Only 8 characters
are allowed (a-z, A-Z, 0-9, "_").

[vasillalov]

Hmm,

From the errors it seems to me that you may have not followed the instructions in my PDF correctly. I'd say start from scratch and make sure you follow every step.