Program injectors

rosskie · 10-04-2011, 10:50 PM

Has any one gone to dealer to program injectors ?

i was just wondering how much they charge

enrita · 10-05-2011, 12:36 AM

just go to an indy shop with an Autologic , takes 5 minutes to code them. You need the actual injectors codes though.

rosskie · 10-05-2011, 02:03 AM

dont know any shops that have it

edyuly · 10-05-2011, 07:20 AM

I changed one injector daniells bmw in pa charged me $ 120. If you change it yourself have the numbers on the injector they will need it. Calibrating the injector did make the car smoother at idle.

scottp999 · 10-05-2011, 07:23 AM

We have been begging the Bavarian Technic people to add this functionality for 2 years. So far no dice. Others have replaced injectors first and then driven gently to the dealer for programming. Not sure on cost.

enrita · 10-05-2011, 07:40 AM

when i switched 3 and drove without programming i did not notice any hickups or codes whatsoever. When you code them you need ALL 6 codes available even if you change one because the program changes them so all 6 codes have to be reentered.

rosskie · 10-05-2011, 11:47 PM

well getting the codes is easy i just need to know the cost from dealer

bv1 · 10-06-2011, 07:32 AM

Interesting.... Didn't know you have to recode all 6.

I have GT1 which I bought from eBay for $30. I found the area in the software to enter the codes / tolerances. I'll create a DIY it seems pretty simple.

bv1 · 10-06-2011, 07:35 AM

Quote:

Originally Posted by rosskie

well getting the codes is easy i just need to know the cost from dealer

Injectors are about ~$106 ea from getbmwparts.com

Rotorocious · 10-06-2011, 08:19 AM

Quote:

Originally Posted by bv1

Interesting.... Didn't know you have to recode all 6.

I have GT1 which I bought from eBay for $30. I found the area in the software to enter the codes / tolerances. I'll create a DIY it seems pretty simple.

GT1 for 30?
Is it a standalone computer or a dvd software?

bv1 · 10-06-2011, 09:37 AM

Quote:

Originally Posted by Rotorocious

Quote:

Originally Posted by bv1

Interesting.... Didn't know you have to recode all 6.

I have GT1 which I bought from eBay for $30. I found the area in the software to enter the codes / tolerances. I'll create a DIY it seems pretty simple.

GT1 for 30?
Is it a standalone computer or a dvd software?

I bought DISv57 and SSSv32 from ebay it was on DVD's. The software is installed on my Dell laptop and operates through a virtual machine. The set-up is a pain but can be done in a few hours.

Rotorocious · 10-06-2011, 09:49 AM

Quote:

Originally Posted by bv1

I bought DISv57 and SSSv32 from ebay it was on DVD's. The software is installed on my Dell laptop and operates through a virtual machine. The set-up is a pain but can be done in a few hours.

Could you Pm me some info on that? Maybe a link?
I'd appreciate it.

Zasquatch · 10-06-2011, 10:08 AM

Quote:

Originally Posted by Rotorocious

Could you Pm me some info on that? Maybe a link?
I'd appreciate it.

+1 me too!

bv1 · 10-06-2011, 10:20 AM

http://www.ebay.co.uk/itm/BMW-DIS-V5...item336cb189ab

Here you go.

You can probably get it for cheaper or for free but I wouldn't chance it. You want ensure you get a disc image vs a file copy or whatever.

The seller gives instructions and was helpful for support.

You'll need an OBD2 cable as well. There should be info on the coding forum for that.

Rotorocious · 10-06-2011, 10:25 AM

Quote:

Originally Posted by bv1

http://www.ebay.co.uk/itm/BMW-DIS-V5...item336cb189ab

Here you go.

You can probably get it for cheaper or for free but I wouldn't chance it. You want ensure you get a disc image vs a file copy or whatever.

The seller gives instructions and was helpful for support.

You'll need an OBD2 cable as well. There should be info on the coding forum for that.

Made offer for 20 gbp and it was auto accepted. You guys could try for lower.

Zasquatch · 10-06-2011, 10:55 AM

Quote:

Originally Posted by Rotorocious

Made offer for 20 gbp and it was auto accepted. You guys could try for lower.

I got the same thing but from a guy in TX, should be faster shipping hopefully. $30 buy it now with free shipping. Hopefully this is legit

marconi118 · 10-06-2011, 11:36 AM

can you code injectors with this???

jjurroz · 10-06-2011, 11:50 AM

a torrent of both disc images would be fantastic!

bimmertt · 10-06-2011, 11:54 AM

torrent this and you'll have some paypal gifts coming your way!

jjurroz · 10-06-2011, 11:59 AM

+1

Quote:

Originally Posted by bimmertt

torrent this and you'll have some paypal gifts coming your way!

jjurroz · 10-06-2011, 12:00 PM

we could potentially upgrade/downgrade our dme software using these tools.

Rotorocious · 10-06-2011, 12:05 PM

I'm down for that. Will see how it looks/works when I get mine.

10-04-2011, 10:50 PM	#1
rosskie Major 34 Rep 1,118 Posts Drives: 335 Join Date: Sep 2010 Location: albany or iTrader: (11)	Program injectors Has any one gone to dealer to program injectors ? i was just wondering how much they charge Last edited by rosskie; 10-04-2011 at 11:23 PM..
	Appreciate 0 Tweet Quote

10-05-2011, 12:36 AM	#2
enrita Major General 161 Rep 7,378 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	just go to an indy shop with an Autologic , takes 5 minutes to code them. You need the actual injectors codes though. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

10-05-2011, 02:03 AM	#3
rosskie Major 34 Rep 1,118 Posts Drives: 335 Join Date: Sep 2010 Location: albany or iTrader: (11)	dont know any shops that have it
	Appreciate 0 Quote

10-05-2011, 07:20 AM	#4
edyuly Private 3 Rep 50 Posts Drives: 07 335i Join Date: Feb 2010 Location: easton pa iTrader: (2)	I changed one injector daniells bmw in pa charged me $ 120. If you change it yourself have the numbers on the injector they will need it. Calibrating the injector did make the car smoother at idle.
	Appreciate 0 Quote

10-05-2011, 07:23 AM	#5
scottp999 Brigadier General 133 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	We have been begging the Bavarian Technic people to add this functionality for 2 years. So far no dice. Others have replaced injectors first and then driven gently to the dealer for programming. Not sure on cost.
	Appreciate 0 Quote

10-05-2011, 07:40 AM	#6
enrita Major General 161 Rep 7,378 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	when i switched 3 and drove without programming i did not notice any hickups or codes whatsoever. When you code them you need ALL 6 codes available even if you change one because the program changes them so all 6 codes have to be reentered. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

10-05-2011, 11:47 PM	#7
rosskie Major 34 Rep 1,118 Posts Drives: 335 Join Date: Sep 2010 Location: albany or iTrader: (11)	well getting the codes is easy i just need to know the cost from dealer
	Appreciate 0 Quote

10-06-2011, 07:32 AM	#8
bv1 Private First Class 6 Rep 169 Posts Drives: 335i Coupe AT Join Date: Jan 2011 Location: Toronto iTrader: (0)	Interesting.... Didn't know you have to recode all 6. I have GT1 which I bought from eBay for $30. I found the area in the software to enter the codes / tolerances. I'll create a DIY it seems pretty simple. __________________ \|Cobb AP / JB4 \| DCI \| BMS WW Meth Kit \| AMS FMIC \| Macht Schnell 3" DP \|
	Appreciate 0 Quote

10-06-2011, 10:20 AM	#14
bv1 Private First Class 6 Rep 169 Posts Drives: 335i Coupe AT Join Date: Jan 2011 Location: Toronto iTrader: (0)	http://www.ebay.co.uk/itm/BMW-DIS-V5...item336cb189ab Here you go. You can probably get it for cheaper or for free but I wouldn't chance it. You want ensure you get a disc image vs a file copy or whatever. The seller gives instructions and was helpful for support. You'll need an OBD2 cable as well. There should be info on the coding forum for that.
	Appreciate 0 Quote

10-06-2011, 11:36 AM	#17
marconi118 Major 94 Rep 1,184 Posts Drives: 06/07 e93 335i Join Date: Nov 2008 Location: europe iTrader: (0)	can you code injectors with this???
	Appreciate 0 Quote

10-06-2011, 11:50 AM	#18
jjurroz Second Lieutenant 24 Rep 269 Posts Drives: 2018 F80 M3 ZCP Join Date: Sep 2010 Location: Ft. Lauderdale, FL iTrader: (0)	a torrent of both disc images would be fantastic!
	Appreciate 0 Quote

10-06-2011, 11:54 AM	#19
bimmertt Lieutenant Colonel 93 Rep 1,794 Posts Drives: 2007 e92 335i Join Date: Nov 2008 Location: Earth iTrader: (7)	torrent this and you'll have some paypal gifts coming your way!
	Appreciate 0 Quote

10-06-2011, 12:00 PM	#21
jjurroz Second Lieutenant 24 Rep 269 Posts Drives: 2018 F80 M3 ZCP Join Date: Sep 2010 Location: Ft. Lauderdale, FL iTrader: (0)	we could potentially upgrade/downgrade our dme software using these tools.
	Appreciate 0 Quote

10-06-2011, 12:05 PM	#22
Rotorocious Lieutenant Colonel 103 Rep 1,520 Posts Drives: 335xi Join Date: May 2010 Location: Colorado iTrader: (3)	I'm down for that. Will see how it looks/works when I get mine.
	Appreciate 0 Quote