Procede and state emmissions testing

skioutwest · 11-12-2011, 08:29 AM

I took my N55 in for it's first emmissions testing since installing my Procede. The shop (not the dealer) called me and said that the test could not be done....something about emmission controls not being set. They said this happens when the battery is disconnected and that I may need to drive the car for 150 miles.

Is this being caused by the Procede? Should I have turned off CanClear and put the unit in valet mode?

-Mark

Mr. Clarkson · 11-12-2011, 01:05 PM

Needs to be done regardless of Procede

TN_3 · 11-13-2011, 02:18 PM

Same thing happened to me. You have to turn off can clear and set to map 0. Problem is that it takes a while to set the readiness monitors. I've performed the BMW drive cycle twice but my evap and egr monitors are still not setting.

skioutwest · 11-13-2011, 06:03 PM

Ok....just so I am clear, I need to tuen off CanClear and set to map 0, then drive the car for a while (150 miles?) to reset the monitors? Thanks!!

-Mark

N55 · 11-17-2011, 03:16 AM

I went through the same thing, valet mode the procede and drive the car for 100 miles then you're good.

parky1215 · 11-17-2011, 10:07 AM

Quote:

Originally Posted by skioutwest

I took my N55 in for it's first emmissions testing since installing my Procede. The shop (not the dealer) called me and said that the test could not be done....something about emmission controls not being set. They said this happens when the battery is disconnected and that I may need to drive the car for 150 miles.

Is this being caused by the Procede? Should I have turned off CanClear and put the unit in valet mode?

-Mark

hmm, do you have to get emission test over there for new cars?
Here at Cali, we don't have to do it for first 5 years.

fdriller9 · 11-24-2011, 06:33 PM

Thats strange. My friend went to get his e46 inspected and failed because it wasn't ready. This was after clearing a code in his car for a pcv line leak. We ended up replacing the line, then on the ride over to the DMV, it cleared on it's own....which is what I expected.

But I had a leak in my EVAP system and I just cleared the code in line while I was waiting. They scanned the car and I passed.

Slops · 11-27-2011, 09:01 AM

Do I have to be on map0 for the whole 100 miles or only when you go in for the emission test. I turned auto can clear off through the procede software already.

FrankiE90 · 11-27-2011, 11:28 AM

this is good info -
MAP 0 - can clear off ,
then drive some.

11-12-2011, 08:29 AM	#1
skioutwest Second Lieutenant 85 Rep 262 Posts Drives: 2020 X4MC, 2017 M3ZCP, 2014 M5 Join Date: Sep 2007 Location: Collegeville, PA iTrader: (3)	Procede and state emmissions testing I took my N55 in for it's first emmissions testing since installing my Procede. The shop (not the dealer) called me and said that the test could not be done....something about emmission controls not being set. They said this happens when the battery is disconnected and that I may need to drive the car for 150 miles. Is this being caused by the Procede? Should I have turned off CanClear and put the unit in valet mode? -Mark
	Appreciate 0 Tweet Quote

11-12-2011, 01:05 PM	#2
Mr. Clarkson Lieutenant 41 Rep 541 Posts Drives: 2011 135i Join Date: Sep 2010 Location: San Diego iTrader: (0) Garage List 2011 135i [0.00]	Needs to be done regardless of Procede __________________
	Appreciate 0 Quote

11-13-2011, 02:18 PM	#3
TN_3 Major 342 Rep 1,352 Posts Drives: 2018 M3 CS Join Date: Oct 2007 Location: Franklin, TN iTrader: (10) Garage List 2020 BMW X5 M50i G05 [0.00] 2018 BMW M3 CS F80 [0.00]	Same thing happened to me. You have to turn off can clear and set to map 0. Problem is that it takes a while to set the readiness monitors. I've performed the BMW drive cycle twice but my evap and egr monitors are still not setting. __________________ 2018 M3 CS F80 l SMB l EXEC 2020 X5 M50i G05 l MW l BLACK l PREM l DHP l 22” l PARK l EXT S-LINE l LASER l TH l AG
	Appreciate 0 Quote

11-13-2011, 06:03 PM	#4
skioutwest Second Lieutenant 85 Rep 262 Posts Drives: 2020 X4MC, 2017 M3ZCP, 2014 M5 Join Date: Sep 2007 Location: Collegeville, PA iTrader: (3)	Ok....just so I am clear, I need to tuen off CanClear and set to map 0, then drive the car for a while (150 miles?) to reset the monitors? Thanks!! -Mark
	Appreciate 0 Quote

11-17-2011, 03:16 AM	#5
N55 ⒸⒺⓇⓉⓘⒻⒾⒺⒹ✬ⓃⒾⓃⒿⒶ 137 Rep 1,475 Posts Drives: 🚀 Join Date: Nov 2010 Location: Pittsburgh iTrader: (3) Garage List 2015 BMW M4 [0.00] 2012 BMW 335IS (SOLD) [6.84] 2011 BMW 335XI (SOLD) [4.66] 2008 BMW 335xi (SOLD) [10.00]	I went through the same thing, valet mode the procede and drive the car for 100 miles then you're good.
	Appreciate 0 Quote

11-24-2011, 06:33 PM	#7
fdriller9 Banned 252 Rep 7,089 Posts Drives: '06 AW 330xi Join Date: Mar 2009 Location: North Jersey/Philly/NYC iTrader: (4) Garage List 2006 330xi [6.44]	Thats strange. My friend went to get his e46 inspected and failed because it wasn't ready. This was after clearing a code in his car for a pcv line leak. We ended up replacing the line, then on the ride over to the DMV, it cleared on it's own....which is what I expected. But I had a leak in my EVAP system and I just cleared the code in line while I was waiting. They scanned the car and I passed.
	Appreciate 0 Quote

11-27-2011, 09:01 AM	#8
Slops Major General 188 Rep 5,417 Posts Drives: 2005 C55 AMG Join Date: Jan 2011 Location: Oxford iTrader: (2)	Do I have to be on map0 for the whole 100 miles or only when you go in for the emission test. I turned auto can clear off through the procede software already.
	Appreciate 0 Quote

11-27-2011, 11:28 AM	#9
FrankiE90 Major General 654 Rep 8,801 Posts Drives: Krooked Sk8board Join Date: Feb 2008 Location: Pasadena, Ca iTrader: (11)	this is good info - MAP 0 - can clear off , then drive some. __________________ FrankiE90 AKA:.[The TANK] *CLICK THE SIG E90s (been gone but not forgotten) • KW clubsports • • • • • • • • • • 18" BBS GT4 // Build E30 (pending) + E46 M3 Wagon ESTORIL Blue
	Appreciate 0 Quote