[Eternal_SIR]

Hey guys, just needed some advise from you coding experts. So here my situation. About a year ago i had my TPMS disable, removed the RDC module by a local coder but we wasn't able to activate the TPM menu in idrive. It just stayed grayed out. Just a few days ago i got a flat tire warning. I checked all my tires and they were a little low so i filled them up back to normal and went for a drive hoping it would reset but it didn't. I can't access the reset menu on the idrive since its greyed out.

What can i do to get rid of that warning? It just keeps pooping back up on my dash every time i hit the BC button to get rid of the warning.

My car is a 2007 E92 335i production date 11/06

[matteblue3er]

Coder should have added the RPA SA VO code after removing the TPMS one and defaulted the affected modules.

Maybe try going through the BC menu

[Levanime]

It was not coded correctly

[Eternal_SIR]

BC menu doesn't work. Tried that. Just so strange how everything was fine for over a year and out of the blue this happens.

[Mashman]

Originally Posted by Eternal_SIR

BC menu doesn't work. Tried that. Just so strange how everything was fine for over a year and out of the blue this happens.

Could it be that the batteries in the sensors have started to go out?

[Eternal_SIR]

Originally Posted by Mashman

Could it be that the batteries in the sensors have started to go out?

i had the TPMS system disabled with coding so the battery in the wheels shouldn't impact the system as it technically should be using the ABS to sense rotational variations to determine flat. If it was an ABS sensor issue that should throwing a code too i belive.