[Beamin]

Originally Posted by DJ Apex

Ok so since i swaped back to my US air box from my loud usless Injen Intake.
Ive noticed more LOW END TQ. But ive lost a little bit of TOP END not alot but i can tell.

So i was thinking why can we just drill 4 holes add a adapter plate for a cone filter and remove our crappy paper one add a small cone filter and bolt it all up. Well it was very easy.
I love it ive noticed the gain in low end tq is still there but top end still pulls hard as well.

So for the cost of $380 - $420 for euro box. I made mine for the cost of $40

It dose the job and im still gonna invest in a euro box just to see on a dyno if my Euro (US modded) box makes the same HP as the REAL EURO Intake.

Dont hate on the crappy cut outs they are all sanded down and are all even.
Also anyone wanan gimie there US stock box for trade for my injen plus $50 Cash??

Cone filter specs for perfect fitment and still leaves box with room to close
5.5 In. Od Base/4.75 In. Od Top, H-6.25 In

Parts Used from local auto parts
Spectre - 8148 (Air intake flange mount) <--- Its plastic and u will need two to mount back to back. Since our US box has a curve in like a velocity stack. pics will show u what i mean. Since one will work it just wont mount flush it will leave a gap on eather side. So two mounted back to back makes a nice fitment and fits very snug. You will need to cut out a bit of the mount once its recessed in or else MAF wont fit. You will also need a Few bolts & nuts.
K time for PICSSS

Stock Box

Drilled holes for mounting flange to box


Flange part number and Flange


Flange mounted




Cut flange for MAF to fit

Flange fitment


Bolts and nuts

Box 80% done

Shot of filter and box bolted all up



Hope u guys like it and im excited to see what the HATERS gotta say!
Have A Marry Xmas Guys!!!!

Have you found someone to make the trade for the stock air box?

[e92ninja]

where did you get the cone from who is it by

[Njzkrish]

Originally Posted by e92ninja

where did you get the cone from who is it by

Hmm I should of waited to do this instead of buying the K&N drop-in >:

Ninja - AutoZone for the parts OP used. I believe Spectre/Air duct mount plate Part # 8148 and Cone air Filter Spectre P3 Part #9132 (Correct me if I'm wrong please :]).

Can anyone fill me in if this is better to do than the K&N drop-in?

[e92ninja]

Originally Posted by Njzkrish

Hmm I should of waited to do this instead of buying the K&N drop-in >:

Ninja - AutoZone for the parts OP used. I believe Spectre/Air duct mount plate Part # 8148 and Cone air Filter Spectre P3 Part #9132 (Correct me if I'm wrong please :]).

Can anyone fill me in if this is better to do than the K&N drop-in?

thank you, i took the measurements that he had and gave it to the guy at autozone and he looked at me funny i knew i needed a part number

[Rival]

Originally Posted by Njzkrish

Hmm I should of waited to do this instead of buying the K&N drop-in >:

Ninja - AutoZone for the parts OP used. I believe Spectre/Air duct mount plate Part # 8148 and Cone air Filter Spectre P3 Part #9132 (Correct me if I'm wrong please :]).

Can anyone fill me in if this is better to do than the K&N drop-in?

yes, it should be miles better than just a drop in filter and charcol delete.

Esp. if you dont the dinan mod as well.

[Rival]

Originally Posted by Rival

based on the DJapex said it should be perfect.....

http://www.autozone.com/autozone/acc...ntifier=628426

this is the filter.....based on the size DJ said in the first post.