[poldim]

Bavarian Soundwerks enclosures are designed exclusively for your BMW. A subwoofer can only sound as good as the enclosure that it resides in. Engineered using a computer controlled CNC router with cuts accurate to the 1/1000th of an inch, BSW enclosures are manufactured from only the finest materials available.

Laminate on the top and bottom surfaces, wrapped in a luxurious black carpet around the sides, and embossed with a custom "M" logo, no stone was left unturned in the design of these enclosures. We even went so far as to seal each enclosure with fiberglass resin to ensure an airtight seal. This also eliminates the hard angles inside of the enclosure which cause standing waves,and create unwanted distortion in your music.

Each enclosure is designed specifically to meet your requirements as not only an audio enthusiast, but the owner of the ultimate driving machine.
F.110E Features at a Glance:

- Universal application, fits across all vehicle model lines

- Accommodates all MB Quart subwoofers, as well as most popular brands.

- Computer-aided design using a state-of-the-art CNC router for precise cuts, which are accurate to the 1/1000th of an inch.

- Fiberglass resin lined to ensure a perfectly sealed and structurally sound enclosure. The sealing of the enclosure with this resin helps to round off the internal corners, which eliminates standing waves. This drastically decreases distortion, and improves the overall sound of the subwoofer.

- Down-firing sealed enclosure, with the subwoofer placed 2" above the floor.

- Laminate covered top and bottom, and wrapped in a luxurious black carpet

- Each enclosure has an embossed M logo placed underneath the carpet on the front of the enclosure for a very understated, stealth look.

- Velcro-lined feet, which limit unwanted movement around trunk or hatch.

- External Dimensions: 24" x 12" x 9", which yields an internal volume of .751 cubic feet. The external diameter of the woofer cutout is 9.29", and the overall depth of the enclosure is 6.26", including the height of the laminate.


$219.95

http://www.namotorwerks.com/products...ion.php/II=317



Anyone have this?