Sponsored by The Tire Rack

[pentaxis]

Just wondering what all would be required, and if 265/30 19s would fit for tires.

[TypicalCat]

im running 260 30 19 on my 19x10.5's youre fine with that set up... are you running any sort of suspension upgrades? if your car is dumped you might rub a bit... other than that you should be fine

[Hey Ant]

yes it will fit, run a 265/30-19 and you won't rub. My current setup is 19x10 +20 rear with 265/30-19 and rubs slightly.

[ModBargains.com]

Yes, the 19x10 ET20-25 will fit with a 265/30/19 in the rear with a fender roll on a lowered car.

[pentaxis]

Originally Posted by TypicalCat

im running 260 30 19 on my 19x10.5's youre fine with that set up... are you running any sort of suspension upgrades? if your car is dumped you might rub a bit... other than that you should be fine

You have a 4 door with more room in the rear so this probably won't apply. Thanks though!

Originally Posted by Hey Ant

yes it will fit, run a 265/30-19 and you won't rub. My current setup is 19x10 +20 rear with 265/30-19 and rubs slightly.

Any pictures? And do you have rolled fenders?

Originally Posted by **********s.com

Yes, the 19x10 ET20-25 will fit with a 265/30/19 in the rear with a fender roll on a lowered car.

My car isn't currently lowered but I am planning on it. How much of a roll is required?


The reason I am asking is because I am waiting on warranty replacement wheels in that are 1.5 months out, but they have a set of the 19x10 +22 in stock. If all i need to do is a simple roll and I will have zero rubbing with my 265/30s, I will just have them send those instead.

[dragazn]

I was in the same situation, but running 265/30/19 +32ET on General UHP on stock height and it rubs when going over bumbs.


To fix it, i needed a fender roll, people around my area recommend STETT. I took the car to Stett performance for a fender roll, which i told them my setup +32 +5mm spacer = +27ET on 265/30/19, they fitted the spacer and said no we can do it but no guarantee that the roll might chip or scratch the paints, and even if the roll is perfect when I go over hard bumb it will tear my bumber apart. Which scare me and I only ask for a fender roll to clear the +32 right now. I have read a lot of people said its will clear from 20-25, not sure why STETT is telling me something else, either they are incompetent or they just not sure on their skill on fender rolling.

[F80M]

This guy is running 10" front and 11" rear with +22 all around...amazing. Im loving it...
http://www.e90post.com/forums/showthread.php?t=537628

[CryMeARiver]

Will 19x10 +22 tire size 265/30/19 kumhi ecsta spt tires. fit a 2008 e90 335i? The car is not lowered. Rims are vmr vb3 for a e46 just want to make sure they fit and wont rub. Thank you

[Lulz_M3]

Originally Posted by SourWiezel

Will 19x10 +22 tire size 265/30/19 kumhi ecsta spt tires. fit a 2008 e90 335i? The car is not lowered. Rims are vmr vb3 for a e46 just want to make sure they fit and wont rub. Thank you

Yes, with a fender roll and some additional rear camber.

[teknic90]

Originally Posted by SourWiezel

Will 19x10 +22 tire size 265/30/19 kumhi ecsta spt tires. fit a 2008 e90 335i? The car is not lowered. Rims are vmr vb3 for a e46 just want to make sure they fit and wont rub. Thank you

Did you ever get your rims mounted? Did you have to Roll the fenders? I'm about to get tires for my 19x10 et22 linea corse 818's and I wasn't sure if I needed a fender roll in the back or not. I was getting the same size tires too but the hankook v12's 265/30/19