[GetSomeE92]

If so, what is your take on it and where do you get the E85? Also, would you mind helping me update my firmware to the latest one?

[LivnLife31]

Whenever you want I can help with the new maps. I think the new maps run real strong.

[GetSomeE92]

Originally Posted by LivnLife31

Whenever you want I can help with the new maps. I think the new maps run real strong.

Sounds good to me, Mark. I've been wanting to try out the new map 5, and maybe some E85. I should have your number still. Where are you located again?

[LivnLife31]

Originally Posted by GetSomeE92

Sounds good to me, Mark. I've been wanting to try out the new map 5, and maybe some E85. I should have your number still. Where are you located again?

I am still in Plantation right now, but am in Miami quite frequently. Let me know when-I still have your # from the track.

[GetSomeE92]

Originally Posted by LivnLife31

I am still in Plantation right now, but am in Miami quite frequently. Let me know when-I still have your # from the track.

Hit me up next time you're going to be headed to the Miami area and we'll set something up.

[Loco Goose]

come out to the Bokampers meet tomorrow & I'm sure someone can update it for you.

If I go, I can update it for you

by the way, the new update is a must for all JB4 people, on map 5 the car runs like beast

[GetSomeE92]

Originally Posted by Loco Goose

come out to the Bokampers meet tomorrow & I'm sure someone can update it for you.

If I go, I can update it for you

by the way, the new update is a must for all JB4 people, on map 5 the car runs like beast

I don't know that I'll be able to make it, but I'll post in the meet thread if I am.

[beemerboy305]

runs awesome map 5 w/ 50/50 e85 and 93 : )

[E90Company]

Originally Posted by beemerboy305

runs awesome map 5 w/ 50/50 e85 and 93 : )

What are your mods? I am thinking of doing it with DCI only.

[GetSomeE92]

Originally Posted by E90Company

What are your mods? I am thinking of doing it with DCI only.

That's what I'll be doing. Other than the JB4, I only have a BMS DCI.

Ran pretty strong at the track, even though it was 90* out. Best on race gas and map 7 was 12.51 @ 112.77 mph. Map 5 and race gas gave me a best of 12.55 @ 111.60 mph. It seems people are able to run map 7 with the E85 blends, so I'd imagine it will be similar.

EDIT: These runs were done on the 9/16 firmware, which I'm still running.

[fasteddie222]

There's e85 next to my house in a gas station on us1 and 144st. I have been trying to update my JB4 but I have no idea how to do it. Can anyone help me out? I have a N55

[BoostAddict]

Originally Posted by fasteddie222

There's e85 next to my house in a gas station on us1 and 144st. I have been trying to update my JB4 but I have no idea how to do it. Can anyone help me out? I have a N55

I don't think BMS has released e85 specific maps for the N55 yet. You can try just blending and running the race map.

[Futtbuckin]

Quick question, so to get the new maps, just get the cable and updates from terry?

[E90Company]

Originally Posted by mja305

Quick question, so to get the new maps, just get the cable and updates from terry?

Yea, you need to get the USB cable and download the free software from BMS to update.

[neilvosko]

i ran map 5 with e85, but felt sluggish, didnt even hear the turbo spool. map2 was stronger, dont know why

[GetSomeE92]

I updated mine but now I'm getting random misfires and don't know why. Going to try and restore default settings this weekend and see if that helps. Did this happen to anyone else?

[LivnLife31]

Originally Posted by GetSomeE92

I updated mine but now I'm getting random misfires and don't know why. Going to try and restore default settings this weekend and see if that helps. Did this happen to anyone else?

Hey Steve! How did you finally download the new firmware? Did you upload both the new firmware and interface?

[BoostAddict]

Originally Posted by GetSomeE92

I updated mine but now I'm getting random misfires and don't know why. Going to try and restore default settings this weekend and see if that helps. Did this happen to anyone else?

The Ethanol content in your mix is too high. Try a smaller percentage of e85.

[GetSomeE92]

Originally Posted by LivnLife31

Hey Steve! How did you finally download the new firmware? Did you upload both the new firmware and interface?

Used one of my friend's girlfriend's computers. Used the most recent interface and the most recent firmware. Not sure why I'm now getting the random misfires. It only does it when I'm on Map 5, but not on Map 1.

No idea why, so I'm going to restore the defaults (didn't do this when I installed the new firmware, so it may help) and try again.

[GetSomeE92]

Originally Posted by ***********

The Ethanol content in your mix is too high. Try a smaller percentage of e85.

It's doing it on straight 93 octane. I haven't mixed any E85 in as of yet.

[LivnLife31]

Originally Posted by GetSomeE92

Used one of my friend's girlfriend's computers. Used the most recent interface and the most recent firmware. Not sure why I'm now getting the random misfires. It only does it when I'm on Map 5, but not on Map 1.

No idea why, so I'm going to restore the defaults (didn't do this when I installed the new firmware, so it may help) and try again.

what codes are you getting?

[GetSomeE92]

Originally Posted by LivnLife31

what codes are you getting?

Misfire on cylinder 6, cylinder 5 and I think 3. Plus the "misfire, multiple cylinder" code (only on Map 5). This morning, on Map 1, I got misfire on cylinder 6 and the "misfiring in case of tank filling level too low". I do need to get gas, though. Other than that, no codes on Map 1.