JB4 Tuning Melbourne

pcockley · 12-20-2011, 12:39 AM

Quote:

Originally Posted by MFKN3

Not trying to stir the pot but all that in 16hrs @ 100 per

No decent BMW specialist would use burgers stuff either. It works, but is cheap for a reason. Sounds like OP is happy though, DIY goes alright, will just need to set aside a lot of spare time

If you want to start a jb4 v5 discussion go to the main board.
I think the op was going to buy direct and get HIS mechanic to do the install

RaihaX · 12-20-2011, 12:48 AM

luster · 12-20-2011, 03:04 PM

We all mod for different reasons, different goals and with different budgets.

Some try to squeeze the best pphp (price per horse power) out of their mods and take a slow, calculated and methodological approach to modding.

Some just want the biggest, baddest, for full retail price plus fitting.

Some want a few visual mods, as they become available, some performance mods and really will never be finished. Mods are bought and fitted in a pace only defined by the modder.

Then there is someone in-between. A fairly informed buyer, happy to read, read some more and be informed, informed enough. These buyers are what is the current market and perfect for operators like BMR.

I've dealt with Stu for some time, every time I have gotten a quote, the prices are the same as I can get myself, imported and bought direct! So the perfect fit for this type of buyer is the open-jacket (to reveal singlet) man himself, stu!

I wish I was more time poor, so I could just send him a list of what I want and get him to do it. Unfortunately, I have more time available to me than most, and enjoy chasing the most ridiculous bargains

So to sum up, OP you have made the most fiducially responsible and a smart choice with finding your bolt-ons.

Do I have a man crush? perhaps.

Am I sticking up for someone who hasn't even been attacked? sure.

I just wanted to say it. hah!

luster · 12-20-2011, 03:24 PM

executive summary from previous post: stu is the fast track to get the best value for money mods, that you would want or need after 200+ hours of reading every thread and post for about the same money you would pay trying to do it for yourself.

pcockley · 12-20-2011, 04:14 PM

Quote:

Originally Posted by luster

We all mod for different reasons, different goals and with different budgets.

Some try to squeeze the best pphp (price per horse power) out of their mods and take a slow, calculated and methodological approach to modding.

Some just want the biggest, baddest, for full retail price plus fitting.

Some want a few visual mods, as they become available, some performance mods and really will never be finished. Mods are bought and fitted in a pace only defined by the modder.

Then there is someone in-between. A fairly informed buyer, happy to read, read some more and be informed, informed enough. These buyers are what is the current market and perfect for operators like BMR.

I've dealt with Stu for some time, every time I have gotten a quote, the prices are the same as I can get myself, imported and bought direct! So the perfect fit for this type of buyer is the open-jacket (to reveal singlet) man himself, stu!

I wish I was more time poor, so I could just send him a list of what I want and get him to do it. Unfortunately, I have more time available to me than most, and enjoy chasing the most ridiculous bargains

So to sum up, OP you have made the most fiducially responsible and a smart choice with finding your bolt-ons.

Do I have a man crush? perhaps.

Am I sticking up for someone who hasn't even been attacked? sure.

I just wanted to say it. hah!

fiducially?? is that a word? Or did you mean financially

Well put though, there are folk who just want it now and are happy to pay the 'knowledge' price, or BMW tax as I like to call it.

I would prefer to read read read ask ask ask then buy and hope I have made the right decision

luster · 12-20-2011, 04:46 PM

fiducially means faith based, faithfully or basically a leap-of-faith.

Actually has nothing to do with money, even tho it sounds like it would :P

In mid OCT, i knew NOTHING about BMW's. I bought my first one, didn't know what LCI meant, the difference between the m-sport model and otherwise or even what the numbers meant.

i must say, the boards have taught me a lot, and local vendors, like-minded, make everything that little bit better.

as a side pcock, I got my xmas present yesterday...all detailing products *win win win!!!*

Stuart@BMRAutowerkes · 12-20-2011, 04:57 PM

Thanks for the kind words Luster and glad to have helped you and lots of other forum members out.

Archangel335 · 12-20-2011, 04:57 PM

Who's stuart by the way? Is there some local contacts I can buy parts and is roughly the same price as ordering from the states myself?

Am looking at a charge pipe & DCI locally if possible. Gonna install my parts on 3rd Jan so I think ordering from overseas might not be such a good option.

pcockley · 12-20-2011, 04:58 PM

Quote:

Originally Posted by luster

as a side pcock, I got my xmas present yesterday...all detailing products *win win win!!!*

what what what

Not zaino by chance?

luster · 12-20-2011, 04:59 PM

the guy above u (bmroxm5)

luster · 12-20-2011, 05:02 PM

Quote:

Originally Posted by pcockley

what what what

Not zaino by chance?

no

swissvax, optimum, adam's, leatherique, p21, sonax, wolf and maquires

pcockley · 12-20-2011, 05:07 PM

Quote:

Originally Posted by Archangel335

Who's stuart by the way? Is there some local contacts I can buy parts and is roughly the same price as ordering from the states myself?

Am looking at a charge pipe & DCI locally if possible. Gonna install my parts on 3rd Jan so I think ordering from overseas might not be such a good option.

Hay STU you need to put up a propper avatar. Based on PWOH's comments (and others) something like this sounds about right

luster · 12-20-2011, 05:09 PM

too much clothes...

Archangel335 · 12-20-2011, 05:23 PM

Quote:

Originally Posted by luster

the guy above u (bmroxm5)

Oh.

BMWGTR · 12-20-2011, 06:10 PM

LOL.
I don't get the naked guy doing bicep curls joke. Plz exploin.

pcockley · 12-20-2011, 06:30 PM

Quote:

Originally Posted by BMWGTR

LOL.
I don't get the naked guy doing bicep curls joke. Plz exploin.

You asked who Stu was thats him

Stuart@BMRAutowerkes · 12-20-2011, 06:38 PM

Quote:

Originally Posted by BMWGTR

LOL.
I don't get the naked guy doing bicep curls joke. Plz exploin.

that's me back when I was fat.

RaihaX · 12-20-2011, 07:06 PM

Quote:

Originally Posted by bmroxm5

that's me back when I was fat.

+1 to Stuart always help out

pcockley · 12-20-2011, 07:27 PM

Quote:

Originally Posted by bmroxm5

that's me back when I was fat.

sorry I couldn't find a current photo

RaihaX · 12-20-2011, 07:34 PM

Quote:

Originally Posted by pcockley

sorry I couldn't find a current photo

go on his facebook for some

btw how did this turn to Stuart's sexy body thread?

pcockley · 12-20-2011, 07:37 PM

Quote:

Originally Posted by RaihaX

go on his facebook for some

btw how did this turn to Stuart's sexy body thread?

Isn't this the STU's body thread

Fuck I'm in the wrong place

pcockley · 12-20-2011, 07:39 PM

Mind you I think the OP is going Cobb based on his questions on the cobb flogs jb thread on the main board.

Get it I say and lets do a side by side at Advan, before your trip to Fiji

12-20-2011, 12:48 AM	#24
RaihaX Major General 156 Rep 4,995 Posts Drives: 08' 135i Join Date: Aug 2008 Location: Australia, Perth iTrader: (2)
	Appreciate 0 Quote

12-20-2011, 03:04 PM	#25
luster Major 57 Rep 1,092 Posts Drives: e90, e88 Join Date: Oct 2011 Location: Sydney AU, NJ US, TST HK iTrader: (21)	We all mod for different reasons, different goals and with different budgets. Some try to squeeze the best pphp (price per horse power) out of their mods and take a slow, calculated and methodological approach to modding. Some just want the biggest, baddest, for full retail price plus fitting. Some want a few visual mods, as they become available, some performance mods and really will never be finished. Mods are bought and fitted in a pace only defined by the modder. Then there is someone in-between. A fairly informed buyer, happy to read, read some more and be informed, informed enough. These buyers are what is the current market and perfect for operators like BMR. I've dealt with Stu for some time, every time I have gotten a quote, the prices are the same as I can get myself, imported and bought direct! So the perfect fit for this type of buyer is the open-jacket (to reveal singlet) man himself, stu! I wish I was more time poor, so I could just send him a list of what I want and get him to do it. Unfortunately, I have more time available to me than most, and enjoy chasing the most ridiculous bargains So to sum up, OP you have made the most fiducially responsible and a smart choice with finding your bolt-ons. Do I have a man crush? perhaps. Am I sticking up for someone who hasn't even been attacked? sure. I just wanted to say it. hah!
	Appreciate 0 Quote

12-20-2011, 03:24 PM	#26
luster Major 57 Rep 1,092 Posts Drives: e90, e88 Join Date: Oct 2011 Location: Sydney AU, NJ US, TST HK iTrader: (21)	executive summary from previous post: stu is the fast track to get the best value for money mods, that you would want or need after 200+ hours of reading every thread and post for about the same money you would pay trying to do it for yourself.
	Appreciate 0 Quote

12-20-2011, 04:46 PM	#28
luster Major 57 Rep 1,092 Posts Drives: e90, e88 Join Date: Oct 2011 Location: Sydney AU, NJ US, TST HK iTrader: (21)	fiducially means faith based, faithfully or basically a leap-of-faith. Actually has nothing to do with money, even tho it sounds like it would :P In mid OCT, i knew NOTHING about BMW's. I bought my first one, didn't know what LCI meant, the difference between the m-sport model and otherwise or even what the numbers meant. i must say, the boards have taught me a lot, and local vendors, like-minded, make everything that little bit better. as a side pcock, I got my xmas present yesterday...all detailing products win win win!!!
	Appreciate 0 Quote

12-20-2011, 04:57 PM	#29
Stuart@BMRAutowerkes Major General 808 Rep 5,530 Posts Drives: a black car Join Date: Sep 2010 Location: Sydney iTrader: (3)	Thanks for the kind words Luster and glad to have helped you and lots of other forum members out.
	Appreciate 0 Quote

12-20-2011, 04:57 PM	#30
Archangel335 Private First Class 10 Rep 158 Posts Drives: 335i Join Date: Oct 2011 Location: Melbourne iTrader: (0)	Who's stuart by the way? Is there some local contacts I can buy parts and is roughly the same price as ordering from the states myself? Am looking at a charge pipe & DCI locally if possible. Gonna install my parts on 3rd Jan so I think ordering from overseas might not be such a good option.
	Appreciate 0 Quote

12-20-2011, 04:59 PM	#32
luster Major 57 Rep 1,092 Posts Drives: e90, e88 Join Date: Oct 2011 Location: Sydney AU, NJ US, TST HK iTrader: (21)	the guy above u (bmroxm5)
	Appreciate 0 Quote

12-20-2011, 05:09 PM	#35
luster Major 57 Rep 1,092 Posts Drives: e90, e88 Join Date: Oct 2011 Location: Sydney AU, NJ US, TST HK iTrader: (21)	too much clothes...
	Appreciate 0 Quote

12-20-2011, 06:10 PM	#37
BMWGTR Second Lieutenant 19 Rep 250 Posts Drives: E93 M3 Join Date: Dec 2011 Location: Melbourne iTrader: (0)	LOL. I don't get the naked guy doing bicep curls joke. Plz exploin.
	Appreciate 0 Quote

12-20-2011, 07:39 PM	#44
pcockley Banned 43 Rep 1,719 Posts Drives: 335 Join Date: Apr 2011 Location: sydney iTrader: (1)	Mind you I think the OP is going Cobb based on his questions on the cobb flogs jb thread on the main board. Get it I say and lets do a side by side at Advan, before your trip to Fiji
	Appreciate 0 Quote