bmw performance exhaust

jasonlu · 05-26-2011, 07:28 PM

going to buy a BMW PE system, anyone had one before and how it works?
also, did you guys installed it at BMW or an independent exhaust shop?
if you install it at a independent exhaust shop, will that influence your warranty?
thanks, guys!!!!!

bulldog_yyc · 05-26-2011, 07:47 PM

Quote:

Originally Posted by jasonlu

going to buy a BMW PE system, anyone had one before and how it works?
also, did you guys installed it at BMW or an independent exhaust shop?
if you install it at a independent exhaust shop, will that influence your warranty?
thanks, guys!!!!!

is this a joke?

jzepeda · 05-26-2011, 07:58 PM

I bought the BMW PE and installed it myself. The dealer never questioned me who installed it when I went in for service. I really like how it sounds. It is not that loud but still has a very nice throaty sound to it above 3000 rpm. it took me a couple of hours using Rhino ramps. the hardest part was measuring and cutting the pipes. if you decide to install it yourself, have plenty of blades I went through 4 blades cutting the stock exhaust. I had to make a trim pass after my first cuts. I didn't want to cut to much so I decided to make my cuts shorter and trim vs trying to get it in one go.
hope this helps.

Thanks,
Jorge

jasonlu · 05-26-2011, 08:03 PM

Quote:

Originally Posted by jzepeda

I bought the BMW PE and installed it myself. The dealer never questioned me who installed it when I went in for service. I really like how it sounds. It is not that load but still has a very nice throaty sound to it above 3000 rpm. it took me a couple of hours using Rhino ramps. the hardest part was measuring and cutting the pipes. if you decide to install it yourself, have plenty of blades I went through 4 blades cutting the stock exhaust. I had to make a trim pass after my first cuts. I didn't want to cut to much so I decided to make my cuts shorter and trim vs trying to get it in one go.
hope this helps.

Thanks,
Jorge

Thanks for the great advice,just want to make sure.
Cause these days anything can happen.

Robmaster · 05-27-2011, 08:37 AM

my BMW PE is damn loud with AA 3" Downpipes!

rismo · 05-27-2011, 09:01 AM

With normal downpipes, the sounds is pretty good, It's loud with open downpipes (will wake your neighbours in the morning),

The sound with open DP's and this exausth is pretty sexy, I have people opening their windows asking to rev my engine at the trafic lights hahahah...

bulldog_yyc · 05-27-2011, 10:59 AM

Quote:

Originally Posted by Robmaster

my BMW PE is damn loud with AA 3" Downpipes!

any sound clips?

Dackz · 05-27-2011, 12:42 PM

I love mine. Best mod I did on the car. Im bone stock though, so its my only upgrade. It sounds very deep at light loads say under 1500-1800, but opens up to a very throaty sound when you get on it. Doesnt intrude on daily driving either, as mine is a DD. Its perfect, its how the car should have came if you ask me

caliguy562 · 05-27-2011, 02:29 PM

I'll try to have some clips up on the 7th of june after I put my downpipes and Bmw PE on the car.

mundo74 · 05-27-2011, 04:54 PM

Love mine too. An indie shop did it for 80 bucks. Dealer wanted 400 bucks to install. Could have done it myself but glad I paid to do it

Best part to me is the burble and popping sound you get when you let off the gas

cwg · 05-27-2011, 06:43 PM

I had mine installed by the dealer when I and it was rolled into the purchase price and it added to the residual value on my lease.

Other than the PE I am running stock as far as engine/exhaust system goes. I love the sound of the PE - in my mind, just the right balance - not too loud, but louder and more aggressive sounding than stock, but no where near the "Ricky racer" end of the spectrum. Very sweet sound

cuban335i · 05-27-2011, 07:08 PM

Quote:

Originally Posted by Robmaster

my BMW PE is damn loud with AA 3" Downpipes!

What's the point of the performance exhaust if you're going to put on catless downpipes? Why not get a full exhaust that actually does something besides sound kind of nice?

the only reason I can see someone getting the performance exhaust is if they don't want to deal with warranty issues

rborgia · 05-27-2011, 08:43 PM

I just purchased the BMW PE from Tischer and asked my local deal how much to install it... they told me 3-4 hours @ $132.00 per hour (Crazy!).

So I'm going to have Matt @ CamberToe take care of it.

I went this route so that it was one less headache I need to deal with when going in for service.

E90Vader · 05-27-2011, 08:54 PM

DONT DO IT!! Straight pipe your shit instead homie!

mundo74 · 05-27-2011, 09:09 PM

Quote:

Originally Posted by cuban335i

Quote:

Originally Posted by Robmaster

my BMW PE is damn loud with AA 3" Downpipes!

What's the point of the performance exhaust if you're going to put on catless downpipes? Why not get a full exhaust that actually does something besides sound kind of nice?

the only reason I can see someone getting the performance exhaust is if they don't want to deal with warranty issues

Well I got it for the sound alone. On a car with stock tune an exhaust will not get you much for what you spend. If I wanted power the Cobb, jb4, procede offer much more hp for less $$

tunachris · 05-27-2011, 10:34 PM

I did the PE as my first mod. Since added JB4 and DCI. Would like a bigger FMIC, but I'm going to wait till the car is out of warranty.

Figure the chip and intake come off in 30 minutes or so, if I need to dealer the car, but any aftermarket exhaust would cause issues.

Planning a LSD next, thinking it isn't likely it would be noticed if your not looking for it.

D335NUTZ · 05-27-2011, 11:32 PM

Quote:

Originally Posted by E90Vader

DONT DO IT!! Straight pipe your shit instead homie!

He wants something that won't void his warranty...

Forcefed3 · 05-27-2011, 11:44 PM

Quote:

Originally Posted by Wilazn

He wants something that won't void his warranty...

Any work done from the primary cats back will not void your warranty.

D335NUTZ · 05-28-2011, 12:32 AM

Quote:

Originally Posted by gbreeE90

Any work done from the primary cats back will not void your warranty.

Depends on your SA. They can really make some BS up about your exhaust if they really want to deny your warranty work. If its BMW Performance parts they really cant say anything.

tibra1 · 05-28-2011, 12:46 AM

Quote:

Originally Posted by cuban335i

What's the point of the performance exhaust if you're going to put on catless downpipes? Why not get a full exhaust that actually does something besides sound kind of nice?

the only reason I can see someone getting the performance exhaust is if they don't want to deal with warranty issues

So the BMW PE is only section 3..mufflers?..if yes than I agree..

DP back Madrel bent is the way to go especially with aftermarket DPs.

open the whole sucker up..lol

jasonlu · 05-28-2011, 04:24 PM

Quote:

Originally Posted by rborgia

I just purchased the BMW PE from Tischer and asked my local deal how much to install it... they told me 3-4 hours @ $132.00 per hour (Crazy!).

So I'm going to have Matt @ CamberToe take care of it.

I went this route so that it was one less headache I need to deal with when going in for service.

how much did you get your PE ?
if you dont mind i ask

dj128 · 05-29-2011, 06:26 AM

Bought mine from Tischer, went with PE due to warranty concerns as well. Might add downpipes once out of warranty.

If you have an E92, you only get the mufflers. I had an independent shop weld it in place instead of using the clamps. Also had the tips replaced with rolled tips that sit more flush with the bumper.

My only complaint is that it's super loud at startup and takes about a minute to quiet down to a reasonable level. Great sounding without being obnoxious.

05-26-2011, 07:28 PM	#1
jasonlu Captain 34 Rep 636 Posts Drives: BMW335i Join Date: Apr 2011 Location: SAN DIEGO iTrader: (4)	bmw performance exhaust going to buy a BMW PE system, anyone had one before and how it works? also, did you guys installed it at BMW or an independent exhaust shop? if you install it at a independent exhaust shop, will that influence your warranty? thanks, guys!!!!!
	Appreciate 0 Tweet Quote

05-26-2011, 07:58 PM	#3
jzepeda Lieutenant 29 Rep 587 Posts Drives: 07 e92 Dinan Stage 2 Join Date: Apr 2010 Location: West Covina iTrader: (12)	I bought the BMW PE and installed it myself. The dealer never questioned me who installed it when I went in for service. I really like how it sounds. It is not that loud but still has a very nice throaty sound to it above 3000 rpm. it took me a couple of hours using Rhino ramps. the hardest part was measuring and cutting the pipes. if you decide to install it yourself, have plenty of blades I went through 4 blades cutting the stock exhaust. I had to make a trim pass after my first cuts. I didn't want to cut to much so I decided to make my cuts shorter and trim vs trying to get it in one go. hope this helps. Thanks, Jorge Last edited by jzepeda; 05-26-2011 at 08:18 PM..
	Appreciate 0 Quote

05-27-2011, 08:37 AM	#5
Robmaster Colonel 151 Rep 2,757 Posts Drives: 2010 E82 135, 2005 E87 130i Join Date: Apr 2007 Location: Switzerland iTrader: (3)	my BMW PE is damn loud with AA 3" Downpipes!
	Appreciate 0 Quote

05-27-2011, 09:01 AM	#6
rismo Captain 75 Rep 911 Posts Drives: BMW E92 335 Join Date: Jul 2008 Location: Europe iTrader: (0)	With normal downpipes, the sounds is pretty good, It's loud with open downpipes (will wake your neighbours in the morning), The sound with open DP's and this exausth is pretty sexy, I have people opening their windows asking to rev my engine at the trafic lights hahahah... __________________ BMW 335 E92 09 - Full options - DKG - MHD by Buraq - RB Next Gen - RB Inlets/Outlet - Forge Diverter Valves - AR Catless DP - Afe Intake - Helix IC - FuelIT Stage 2 LPFP - Ar Oil Cooler - PPK Water Cooler - M3 Suspension - JRZ RS1 Shocks - Eibach Pro Springs - Drexler LSD - BMW IS Exhaust - Carbon Endurance Brake Pads - Stainless Steel Brake Lines - M101 Wheels - Michelin PS2 - M-Tech Body - M-Strutbar BMW M550i G30 2019 - BM3
	Appreciate 0 Quote

05-27-2011, 12:42 PM	#8
Dackz Hates Speed Limits 111 Rep 2,589 Posts Drives: E92 335i Join Date: Sep 2008 Location: Northern CO iTrader: (4)	I love mine. Best mod I did on the car. Im bone stock though, so its my only upgrade. It sounds very deep at light loads say under 1500-1800, but opens up to a very throaty sound when you get on it. Doesnt intrude on daily driving either, as mine is a DD. Its perfect, its how the car should have came if you ask me
	Appreciate 0 Quote

05-27-2011, 02:29 PM	#9
caliguy562 Lieutenant 8 Rep 476 Posts Drives: E92 335i Join Date: Dec 2007 Location: garaged somewhere in soCal iTrader: (3)	I'll try to have some clips up on the 7th of june after I put my downpipes and Bmw PE on the car.
	Appreciate 0 Quote

05-27-2011, 04:54 PM	#10
mundo74 Lieutenant 65 Rep 563 Posts Drives: F10M5 Join Date: Oct 2005 Location: P.Pines, FL iTrader: (2)	Love mine too. An indie shop did it for 80 bucks. Dealer wanted 400 bucks to install. Could have done it myself but glad I paid to do it Best part to me is the burble and popping sound you get when you let off the gas __________________ More power please
	Appreciate 0 Quote

05-27-2011, 06:43 PM	#11
cwg Captain 45 Rep 723 Posts Drives: 2017 M4 ZCP. AZB on black Join Date: Nov 2010 Location: Kailua, HI iTrader: (0)	I had mine installed by the dealer when I and it was rolled into the purchase price and it added to the residual value on my lease. Other than the PE I am running stock as far as engine/exhaust system goes. I love the sound of the PE - in my mind, just the right balance - not too loud, but louder and more aggressive sounding than stock, but no where near the "Ricky racer" end of the spectrum. Very sweet sound
	Appreciate 0 Quote

05-27-2011, 08:43 PM	#13
rborgia Private First Class 12 Rep 110 Posts Drives: 2015 M4 Join Date: Apr 2011 Location: Long Island, New York iTrader: (2) Garage List 2015 BMW M4 [10.00]	I just purchased the BMW PE from Tischer and asked my local deal how much to install it... they told me 3-4 hours @ $132.00 per hour (Crazy!). So I'm going to have Matt @ CamberToe take care of it. I went this route so that it was one less headache I need to deal with when going in for service.
	Appreciate 0 Quote

05-27-2011, 08:54 PM	#14
E90Vader Banned 47 Rep 631 Posts Drives: 2007 335i Join Date: Apr 2011 Location: Calgary iTrader: (0)	DONT DO IT!! Straight pipe your shit instead homie!
	Appreciate 0 Quote

05-27-2011, 10:34 PM	#16
tunachris First Lieutenant 17 Rep 363 Posts Drives: 2010 E92 Join Date: Oct 2010 Location: Azusa, CA iTrader: (0) Garage List 2010 E92 [0.00]	I did the PE as my first mod. Since added JB4 and DCI. Would like a bigger FMIC, but I'm going to wait till the car is out of warranty. Figure the chip and intake come off in 30 minutes or so, if I need to dealer the car, but any aftermarket exhaust would cause issues. Planning a LSD next, thinking it isn't likely it would be noticed if your not looking for it.
	Appreciate 0 Quote

05-29-2011, 06:26 AM	#22
dj128 Private First Class 13 Rep 152 Posts Drives: '09 335i E92 Join Date: Apr 2009 Location: Brookline, MA iTrader: (1)	Bought mine from Tischer, went with PE due to warranty concerns as well. Might add downpipes once out of warranty. If you have an E92, you only get the mufflers. I had an independent shop weld it in place instead of using the clamps. Also had the tips replaced with rolled tips that sit more flush with the bumper. My only complaint is that it's super loud at startup and takes about a minute to quiet down to a reasonable level. Great sounding without being obnoxious.
	Appreciate 0 Quote