[Knob]

I know this isn´t probably the right forum, but I´m trying to code the e87 1er FL taillights for a friend (mine are already coded, but I haven´t done this by myself)

without coding:
http://www.bilder-upload.eu/thumb/EYA2csgKfef1WbW.JPG

and with:
http://www.bilder-upload.eu/upload/If4c0UEYG6IltYh.JPG

I just want the upper and lower chambers not to shine anymore.



RL_BL_1_PO_RL_FKT
nicht_aktiv

this is for the bottem chamber, but I can´t find the lines for the uppers chamber...

Has anyone done this, or somehting similar?

[jrstech]

Looking for one cable that will work with a 01/2007 (production) e90 and an 01/2011 LCI e90. A little confused as to which one to get.

[Elliott@DetailAddict]

Originally Posted by larry_bml

Many thanks to this man. You are the best! Thank you very much for your help. The only thing that I did was to load the file modified by you end everything was perfect, no more error.

Thank you!

Absolutely Larry. Looking into your second request now. Also please send your friends TRC file for modification. Cheers!

[Knob]

Originally Posted by Knob

I know this isn´t probably the right forum, but I´m trying to code the e87 1er FL taillights for a friend (mine are already coded, but I haven´t done this by myself)

without coding:
http://www.bilder-upload.eu/thumb/EYA2csgKfef1WbW.JPG

and with:
http://www.bilder-upload.eu/upload/If4c0UEYG6IltYh.JPG

I just want the upper and lower chambers not to shine anymore.



RL_BL_1_PO_RL_FKT
nicht_aktiv

this is for the bottem chamber, but I can´t find the lines for the uppers chamber...

Has anyone done this, or somehting similar?

Nevermind, I got it now


PWM_ANSTEUERUNG_NSL_SL
wert_01
wert_02
PWM_ANSTEUERUNG_RL_BL_2
wert_05

RL_BL_1_PO_RL_FKT
nicht_aktiv
RL_BL_2_PARKL_FKT
nicht_aktiv
RL_BL_2_PO_RL_FKT
nicht_aktiv

[matrix76]

Originally Posted by tldoxmf87

Anyone know how to change the voltage for the angel eyes?
Also, I found out that the angel eyes voltage is normally 12v and changes to 5v when the low beam is turned on.
Maybe knowing that could help coding the dimming issue.

Was anyone able to solve this issue?

[Knob]

You should look for something like PWM_AN_SL_V_AL_1 or
PWM_ANSTEUERUNG_RL_BL_1 (RL = ringlight), it´s probably wert_02 or something, change it to wert_01... I don´t know if that works..

[matrix76]

Originally Posted by Knob

You should look for something like PWM_AN_SL_V_AL_1 or
PWM_ANSTEUERUNG_RL_BL_1 (RL = ringlight), it´s probably wert_02 or something, change it to wert_01... I don´t know if that works..

Thank you, I'll update the results I get later when I get back to coding.

[vexvi]

Thanks everyone for all the help! i was able to disable the low beam error i was getting for such a long time.

[franzzz]

Sorry
It's possible to automatic close sunroof when the rain sensor detect water ?

[jphughan]

Originally Posted by franzzz

Sorry
It's possible to automatic close sunroof when the rain sensor detect water ?

If you have the rain sensor then yes, apparently. However, if the sunroof closes because of rain detection then you won't be able to open it again until you turn the engine off and back on, so most people decide that pressing the button to close the sunroof manually is easier.

[franzzz]

Originally Posted by jphughan

If you have the rain sensor then yes, apparently. However, if the sunroof closes because of rain detection then you won't be able to open it again until you turn the engine off and back on, so most people decide that pressing the button to close the sunroof manually is easier.

TNX

The parameter is in the FZD Module ?

I try.....

[jphughan]

Originally Posted by franzzz

TNX

The parameter is in the FZD Module ?

I try.....

Yes, REGENSCHLIESSEN and REGENSCHLIESSENTILT. You should request access to the Google Doc where you can find that and a bunch of other coding parameters.

[franzzz]

Good !

But the sunroof still closed for 10 min


Today i try to remove DRL taillight : In the Morning it's necessary only dhe front light

[franzzz]

Another Request :

It's possible to change the time of idrive/ccc/radio in order to stretch the period of ignition ? (default the radio still on for 5 min. For other 5 min i need to push start/stop)

IN JBBF Module i found :


SPERRZ_N_BLOCK_WI_HECK
3_min
SRA_SPERRZEIT
10_min
ACHLAUFZEIT_SITZHEIZUNG
15_min
NACHLZ_BISTABR_TRANSPM
5_min
POWERDOWN_WECKER_ANZ
10_min

?

[E90aL]

has anyone have a cable fail on them? the led is red when I plug it into the ecu and the computer recognizes the cable. It worked 2-3 months ago but recently I've been getting the errors listed below
IFH-0003: DATATRANSMISSION TO
INTERFACE DISTURBED
EDIABAS_IFH_0003
Meaning:
A response from the interface was incorrectly received
(characters were lost, protocol frame incorrect, etc.).
Causes:
Contact problems in the cables between the host
system and EDIC-GH.
Error correction: Check the cables between the host system and EDIC-
GH.
Target system: WIN SCO QNX

BIP-0001: OUT OF RANGE
EDIABAS_BIP_0001
Meaning:
Job parameter too long or illegal index when accessing
string registers.
Causes:
This error usually always occurs whenever access is
made to an array variable with a calculated index and
this is too large.
Example:
i=100;
array[100*i]=50;
Error correction: Check all array accesses in your job if they contain an
index which is possibly invalid. The indexes must not
exceed 1024/element size.
Target system: WIN SCO QNX

[Never-Enough]

Is the cable in the OP the only one we can use to code or are there other options?
No US based companies sell it?

[yucki68]

I'm sure it's not with coding, but someone know if it's possible to change the idrive picture on bootscreen ?

THX,

[Elliott@DetailAddict]

Originally Posted by Never-Enough

Is the cable in the OP the only one we can use to code or are there other options?
No US based companies sell it?

I'll shoot you a PM with a link

I don't think anyone's been able to change the boot screen yet but it looks like for CIC navs people are in the process of gaining access to the NAV files via ethernet and able to access sounds and images. Stay tuned.

[Jose_JN]

Hi,
First of all, I am from Spain. Sorry for my english.

I am trying to code my roof on my e93 in order to roll it up from the FOB.
I found 2 parameters on CAS module (KOMFORTSCHLIESSUNG_FB and KOMFORTSCHLIESSUNG_CA) and changed it for 'aktive' but nothing happens.

I dont have comfort access and I only can roll down the top and windows but not roll them up with the FOB (if I use the driver's lock, yes)

Do you know if exist a way to code that?

If only windows roll up with FOB, is enough for me.

I have already get my KOMBI, CAS and NFRM coded for other options like
- Digital speed
- Instant l/100
- Set the sensibility of lights sensor
- Fog lights turn on when unlocking the car
- Comfort FOB eject
...

Regards from Spain

[matrix76]

should be KOMFORTSCHLIESSUNG_FB only

[jphughan]

Originally Posted by Jose_JN

Hi,
First of all, I am from Spain. Sorry for my english.

I am trying to code my roof on my e93 in order to roll it up from the FOB.
I found 2 parameters on CAS module (KOMFORTSCHLIESSUNG_FB and KOMFORTSCHLIESSUNG_CA) and changed it for 'aktive' but nothing happens.

I dont have comfort access and I only can roll down the top and windows but not roll them up with the FOB (if I use the driver's lock, yes)

Do you know if exist a way to code that?

If only windows roll up with FOB, is enough for me.

I have already get my KOMBI, CAS and NFRM coded for other options like
- Digital speed
- Instant l/100
- Set the sensibility of lights sensor
- Fog lights turn on when unlocking the car
- Comfort FOB eject
...

Regards from Spain

On US E93s you can close the top with the fob without any coding. For windows though, the CA option is with the Comfort Access area on the handle and the FB option is the fob. You're looking at the right option but did you enter it as aktive? Should be aktiv (no E). Otherwise maybe the cable messed up and just try coding again?

[Slamaster1261]

i have a macbook pro without windows software. can i still code my e90 through my macbook? i know it says you can use any laptop but im just making sure before i buy a cable and also does anyone have a cable i could borrow?