COBB AccessPORT for the 2011 BMW 135, 335i and 335xi

dcaron9999 · 11-23-2013, 07:03 AM

Quote:

Originally Posted by 335iFFM

No. That's not whp. This is @ the crank. Divide by 1.09 ...

Are you sure, because the graphs generated by Virtual Dyno software states WHP, and my log files were read/interpreted by the software directly...

evo335xi · 11-23-2013, 09:12 AM

Yes any info on 2013 models Feb/March production?

335iFFM · 11-23-2013, 07:12 PM

Quote:

Originally Posted by dcaron9999

Are you sure, because the graphs generated by Virtual Dyno software states WHP, and my log files were read/interpreted by the software directly...

Yes. Your Graph days DynoJet. Take a look into your settings and choose VirtualDyno instead.

dcaron9999 · 11-24-2013, 07:30 AM

Quote:

Originally Posted by 335iFFM

Yes. Your Graph days DynoJet. Take a look into your settings and choose VirtualDyno instead.

Thanks. Graphs are definitely less impressive now...

CombatNinja · 11-24-2013, 08:30 AM

Cobb, are power numbers officially the same as the old version? Wondering if it is just smoothing and drivability or if a bit more power was unlocked. Looking to take the plunge on an aftermarket tune once I get a LSD fitted.

COBB Tuning · 11-24-2013, 11:43 AM

Quote:

Originally Posted by evo335xi

Yes any info on 2013 models Feb/March production?

No info right now.

Quote:

Originally Posted by CombatNinja

Cobb, are power numbers officially the same as the old version? Wondering if it is just smoothing and drivability or if a bit more power was unlocked. Looking to take the plunge on an aftermarket tune once I get a LSD fitted.

The numbers were basically identical, but the boost control is miles beyond what we had when we made the initial map. These maps should be much more refined overall.

-Josh

DesertBMW · 11-24-2013, 12:38 PM

Quote:

Originally Posted by COBB Tuning

You should be ok with a drop-in filter, but an aftermarket intake will help the engine breathe in the top end. You can always log to make sure everything is happy.

-Josh

Stock airbox is pretty big, as well as the stock panel filter. Aftermarket intake just sucks hot air from the engine bay.

335iFFM · 11-24-2013, 04:03 PM

Quote:

Originally Posted by DesertBMW

Stock airbox is pretty big, as well as the stock panel filter. Aftermarket intake just sucks hot air from the engine bay.

I'm of the same opinion. Why Intake?

weeeee · 11-26-2013, 10:18 AM

I installed the v200 Stage 1 Aggressive map on my n55 135i. It's muuuuuuuuuuuch smoother. I used to get hesitation and stumbling, but no more.

You should do a complete accessport uninstall and firmware update to install the new maps. It's saweet. I see now that there's a sale on fmic... might have to jump on that http://www.cobbtuning.com/BMW-1-3-Se...r-p/7b1500.htm

trk411 · 11-30-2013, 05:44 PM

Agreed. I just updated to V200 Stage 1 Aggressive and it seems to be much smoother. Didn't do a whole lot of driving, but seems to be an improvement over the V100 maps.

Th3xf4ctor · 11-30-2013, 07:17 PM

Quote:

Originally Posted by trk411

Agreed. I just updated to V200 Stage 1 Aggressive and it seems to be much smoother. Didn't do a whole lot of driving, but seems to be an improvement over the V100 maps.

Honestly the change in the how the tune feels and how the boost hits is just exponentially better. So smooth and it feels so good. Boost builds a lot better as well.

ONDEMAND · 12-02-2013, 11:21 AM

Quote:

Originally Posted by Th3xf4ctor

Hey Josh ran 3 pulls but only 2 were good pulls. Then I got hit with two codes. One of them was "ECU with no description" the other was P36BE with description of ECU encoding. Any help. I'll have the logs up soon.

I'm having both of these codes and some others:

P2CF4 ?
P2F7C ?
P2F7B ?
P29DO ?
P29EO - Mixture Control?
P36BE ?

I have not had any luck finding definitions of these in the posted PDF files or by searching any of the forums.

Anyone have a clue to what these codes are?

Josh, the car seems to run fine and is smoother, aside from the occasional stumble under high load | low RPM which I had on V1 maps as well?

trk411 · 12-02-2013, 05:34 PM

If I'm correct, look for the codes in the PDF without the "P" in front of the code. If what I looked up was right, there seems to be an issue with knock with two of the codes. Try looking in the second column of the PDF that has the heading "Fault Code (hex)" and you will find all of your codes there. Someone correct me if I am not looking up the codes correctly though.

COBB Tuning · 12-02-2013, 07:33 PM

Quote:

Originally Posted by ONDEMAND

I'm having both of these codes and some others:

P2CF4 ?
P2F7C ?
P2F7B ?
P29DO ?
P29EO - Mixture Control?
P36BE ?

I have not had any luck finding definitions of these in the posted PDF files or by searching any of the forums.

Anyone have a clue to what these codes are?

Josh, the car seems to run fine and is smoother, aside from the occasional stumble under high load | low RPM which I had on V1 maps as well?

Send me an email with your firmware version, your serial number, and your rom version. If its something tune related, I'll get you sorted out.

josh.dankel@cobbtuning.com

-Josh

Th3xf4ctor · 12-02-2013, 09:51 PM

Quote:

Originally Posted by COBB Tuning

Send me an email with your firmware version, your serial number, and your rom version. If its something tune related, I'll get you sorted out.

josh.dankel@cobbtuning.com

-Josh

Josh, been busy the last few days, but will contact you either tomorrow and wednesday with further logs and car data

COBB Tuning · 12-02-2013, 10:57 PM

Quote:

Originally Posted by Th3xf4ctor

Josh, been busy the last few days, but will contact you either tomorrow and wednesday with further logs and car data

Sounds like a plan.
-Josh

ONDEMAND · 12-04-2013, 10:13 AM

Quote:

Originally Posted by COBB Tuning

Send me an email with your firmware version, your serial number, and your rom version. If its something tune related, I'll get you sorted out.

josh.dankel@cobbtuning.com

-Josh

Email Sent!

You gotta love a company who really does work with their customers.

Love COBB products and their support!!!

schach23 · 12-04-2013, 01:44 PM

Is there a difference in the Maps between the V2 and the V3?

schnell325 · 12-04-2013, 04:31 PM

Quote:

Originally Posted by schach23

Is there a difference in the Maps between the V2 and the V3?

I honestly don't think there could be.

schach23 · 12-12-2013, 04:36 PM

Is there a map that puts to stock without technically uninstalling? Is this basically valet mode?

Scott

ronny214 · 12-15-2013, 02:10 PM

Quote:

Originally Posted by schach23

Is there a map that puts to stock without technically uninstalling? Is this basically valet mode?

Scott

Yes, Valet mode would be appropriate here.

On a side note, I am way behind on the curve and I just now got my AP firmware updated and the Stage 2+ v200 aggressive map installed. I've yet to take it out for a ride, but it is about to get a full day of errands up and down tollway/PGBT. Held off for so long because it required an uninstall and reinstall, and damn that initial install takes FOREVER. #lazy haha

ricardocareaga27 · 12-16-2013, 01:42 PM

hello everyone , i am about to buy a married accessport , is it too hard t get it unmarried , thanks a lot everyone,

11-23-2013, 09:12 AM	#596
evo335xi Lieutenant 33 Rep 451 Posts Drives: 335 Join Date: Mar 2013 Location: Ct iTrader: (1)	Yes any info on 2013 models Feb/March production?
	Appreciate 0 Quote

11-24-2013, 08:30 AM	#599
CombatNinja Banned 46 Rep 1,556 Posts Drives: e91 328i, e90 328i, e90 335i Join Date: Feb 2011 Location: United States iTrader: (0)	Cobb, are power numbers officially the same as the old version? Wondering if it is just smoothing and drivability or if a bit more power was unlocked. Looking to take the plunge on an aftermarket tune once I get a LSD fitted.
	Appreciate 0 Quote

11-26-2013, 10:18 AM	#603
weeeee Private First Class 40 Rep 133 Posts Drives: 2011 135i Join Date: Mar 2012 Location: 757 iTrader: (1)	I installed the v200 Stage 1 Aggressive map on my n55 135i. It's muuuuuuuuuuuch smoother. I used to get hesitation and stumbling, but no more. You should do a complete accessport uninstall and firmware update to install the new maps. It's saweet. I see now that there's a sale on fmic... might have to jump on that http://www.cobbtuning.com/BMW-1-3-Se...r-p/7b1500.htm
	Appreciate 0 Quote

11-30-2013, 05:44 PM	#604
trk411 Private 3 Rep 97 Posts Drives: 2016 X5 5.0i Join Date: Oct 2011 Location: Southwestern PA iTrader: (0)	Agreed. I just updated to V200 Stage 1 Aggressive and it seems to be much smoother. Didn't do a whole lot of driving, but seems to be an improvement over the V100 maps.
	Appreciate 0 Quote

12-02-2013, 05:34 PM	#607
trk411 Private 3 Rep 97 Posts Drives: 2016 X5 5.0i Join Date: Oct 2011 Location: Southwestern PA iTrader: (0)	If I'm correct, look for the codes in the PDF without the "P" in front of the code. If what I looked up was right, there seems to be an issue with knock with two of the codes. Try looking in the second column of the PDF that has the heading "Fault Code (hex)" and you will find all of your codes there. Someone correct me if I am not looking up the codes correctly though.
	Appreciate 0 Quote

12-04-2013, 01:44 PM	#612
schach23 BMW enthusiast 58 Rep 386 Posts Drives: BMW e46 M3 Join Date: Apr 2013 Location: Ohio iTrader: (4)	Is there a difference in the Maps between the V2 and the V3?
	Appreciate 0 Quote

12-12-2013, 04:36 PM	#614
schach23 BMW enthusiast 58 Rep 386 Posts Drives: BMW e46 M3 Join Date: Apr 2013 Location: Ohio iTrader: (4)	Is there a map that puts to stock without technically uninstalling? Is this basically valet mode? Scott
	Appreciate 0 Quote

12-16-2013, 01:42 PM	#616
ricardocareaga27 First Lieutenant 10 Rep 318 Posts Drives: bmw 335 m sport lci e90 Join Date: Oct 2013 Location: arizona iTrader: (1)	hello everyone , i am about to buy a married accessport , is it too hard t get it unmarried , thanks a lot everyone,
	Appreciate 0 Quote