Sponsored by The Tire Rack

[wuufer001]

hi all,

i'm thinking to change my wheels and have the VMR V713s in mind. have searched through the forum but didn't come up with pics of non-M E90 with the wheels on. the pics that i've seen are either on the E90 M3 or the E46 M3.

is this wheel out yet?

so the $$ question is, does any have a pic of these wheels on a non-M E90? black E90 will be a +

am trying to see if the M3 offset will on my E90 with stock sport, occasionally i will have 4 people riding and also thinking of lowering with just springs.

i already have the fender rolled.

so, M3 offset on a stock sport suspension and 4 people will rub?
if not then will adding the lowering springs make it rub?

thanks for the help guys.

EDIT: Brandon from EAS was kindly enough to Photoshop a pic of my car with the wheels and i must say, it looks really good. it got me closer to pull the trigger. its only a minimal change that i will steer away from these wheels, but let me wait for the actual pics

[VMRWheels]

Wheels are scheduled to arrive tomorrow at 10am!

The photo shoots we have on hand are the E90 M3 and E92 Non-M. We have a few customers lined up right now to do some local photo shoots at our studio, so stay tuned!

M3 offsets will most likely work on stock height with some slight fender rolling. Once you are lowered, you'll most likely need to flare them a bit. There are a few guys running VB3's and V710's in M3 fitment with flared front/rear fenders.

Hope this helps. If you have any further questions, dont hesitate to contact me.

-Charles@VMRWheels
www.vmrwheels.com

[wuufer001]

Originally Posted by VMRWheels

Wheels are scheduled to arrive tomorrow at 10am!

The photo shoots we have on hand are the E90 M3 and E92 Non-M. We have a few customers lined up right now to do some local photo shoots at our studio, so stay tuned!

M3 offsets will most likely work on stock height with some slight fender rolling. Once you are lowered, you'll most likely need to flare them a bit. There are a few guys running VB3's and V710's in M3 fitment with flared front/rear fenders.

Hope this helps. If you have any further questions, dont hesitate to contact me.

-Charles@VMRWheels
www.vmrwheels.com

by flare, do you mean to alter width or fender roll?

[Hedges]

Originally Posted by VMRWheels

Wheels are scheduled to arrive tomorrow at 10am!

The photo shoots we have on hand are the E90 M3 and E92 Non-M. We have a few customers lined up right now to do some local photo shoots at our studio, so stay tuned!

M3 offsets will most likely work on stock height with some slight fender rolling. Once you are lowered, you'll most likely need to flare them a bit. There are a few guys running VB3's and V710's in M3 fitment with flared front/rear fenders.

Hope this helps. If you have any further questions, dont hesitate to contact me.

-Charles@VMRWheels
www.vmrwheels.com

Can you even flare the fronts?

[phattbam]

front fenders of the e92/3 are made of a plastic material= can not be rolled.

[CV335]

Originally Posted by VMRWheels

Wheels are scheduled to arrive tomorrow at 10am!

Good to know Charles...Bobby is patiently waiting for my wheels

[Peter@VMRWheels]

Originally Posted by wuufer001

by flare, do you mean to alter width or fender roll?

Originally Posted by Hedges

Can you even flare the fronts?

By "flaring" it actually involves "pulling" the fender out a bit. After you roll the "flap" from the back of the fender to gain clearance from tires, if you continue to roll the fender, it will start to flare the fender.

This is considered a very aggressive modification and it is prone to paint damage or metal deforming if your technician has never done it before. If done properly, you can't tell that the fender has been modified, yet it will give another 5-7mm of clearance for the aggressive offsets. An E60 (non-M) with flared fenders can run 265 or even 275 tire up front, and 295/305 tires in the back.

[KkSc]

can't wait to see some installed pics!!

[clickclickboom]

10am today. Sucks that I'm east coast and probably won't see mine for a week.

[mani82]

Where did you find pics of the V713 on a non-M E92?

[phattbam]

Originally Posted by mani82

Where did you find pics of the V713 on a non-M E92?

where did you see that? I haven't seen any yet

[Hedges]

pics pics pics!

[mani82]

Originally Posted by wuufer001

i'm thinking to change my wheels and have the VMR V713s in mind. have searched through the forum but didn't come up with pics of non-M E90 with the wheels on. the pics that i've seen are either on the E90 M3 or the E92 non-M.

Look in the original text!

[VMRWheels]

Woops sorry guys, i meant the E90M3 and E46M3.

So many wheels and so many cars, they all end up looking the same! Keep posted guys, phoot shoots will be done soon.

-Charles@VMRWheels

[wuufer001]

Originally Posted by mani82

Where did you find pics of the V713 on a non-M E92?

Originally Posted by phattbam

where did you see that? I haven't seen any yet

Originally Posted by mani82

Look in the original text!

i thought i saw an E92. went back and searched and i found the E46 M3.
so i guess no non-M's have this wheel on yet.

can't wait for pics

[SV Concepts III]

A birdie told me the shipment arrived today, can't wait for these pictures!

[CV335]

Originally Posted by Nick@Jlevi SW

A birdie told me the shipment arrived today, can't wait for these pictures!

Nick, I confirmed that too

[VMRWheels]

Yes they did! We just finished bringing them in.

-Charles@VMRWheels
www.vmrwheels.com

[wuufer001]

Originally Posted by VMRWheels

Yes they did! We just finished bringing them in.

-Charles@VMRWheels
www.vmrwheels.com

hey charles, will you test fit and do a photoshoot on the E90?

[VMRWheels]

Originally Posted by wuufer001

hey charles, will you test fit and do a photoshoot on the E90?

Indeed we will! We already know the wheels have no fitment issues, we would just like to do some photo shoots!

-Charles@VMRWheels

[Hedges]

pics?

[wuufer001]

can't wait to see pics before i pull the trigger