|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
What kind of tools do I need for my 335i? (Jacks, Sockets, etc)
|
|
11-03-2016, 10:47 AM | #1 |
Second Lieutenant
48
Rep 272
Posts |
What kind of tools do I need for my 335i? (Jacks, Sockets, etc)
I'm looking for exactly what tools I need for my 335i to do a majority of diy (take the tire off, get behind the plastic fender to change tpms transmitters, diy spark plugs, etc)? How much for a basic set of tools. I'm guessing the following:
- Jack stands (3 ton?) - Jack (very flat one), if anyone know whats a good priced one? - Torque and socket wrenches (I know metric, but not what sizes)? I would like to get a impact to take the tires off, but the one I want is quite expensive right now ($300), I'm wondering whats a good alternative just to get the tire off so I can work inside? Is there anyway I can get these tools for around $75-100? |
11-03-2016, 11:35 AM | #2 |
Lieutenant
140
Rep 476
Posts |
Not a chance you'll get the tools you need for $100. Get a decent jack and jack stands. With your budget I'd suggest skipping the impact; get a tire iron.
In Canada we have Princess Auto, which I believe to be similar to Harbor Freight. I sometimes buy tools here knowing they are cheap that, from time to time, break. If you can afford it get yourself a good metric set of sockets from some place that has lifetime warranty. Get torx, etorx, and hex sockets, a good set of wrenches. If you have time to amass your collection then start slowly, buy tools when they go on sale, and try to buy quality tools (doesn't have to be Matco /Snap-on, etc, but something that will last). Happy wrenching! |
Appreciate
0
|
11-03-2016, 11:38 AM | #3 | |
Second Lieutenant
48
Rep 272
Posts |
Quote:
How much do you think a decent set of tools will cost? As for |
|
Appreciate
0
|
11-03-2016, 03:35 PM | #4 |
Lieutenant
140
Rep 476
Posts |
I'd budget a few hundred dollars for hand tools. Prices in Canada might be quite a bit more, not sure. Here are just a few examples of items from Harbor Freight; I'm not recommending them, but this is what I found quickly browsing there (things like etorx are missing, so spend some time surfing there):
Sockets http://www.harborfreight.com/hand-to...set-67995.html Universal: http://www.harborfreight.com/hand-to...set-67869.html Depending on what you do, you might need a small torque wrench http://www.harborfreight.com/hand-to...ench-2696.html Larger torque wrench http://www.harborfreight.com/hand-to...nch-62431.html Torx http://www.harborfreight.com/hand-to...set-67914.html Extensions: http://www.harborfreight.com/hand-to...set-61968.html |
Appreciate
0
|
11-03-2016, 04:05 PM | #5 |
Second Lieutenant
48
Rep 272
Posts |
Thanks for posting that. For now, I just want to get to my tpms transmitters, make sure its well into place. I went to a friend, and when we change brakes, it took less than 15-20 mins (he had all the good brand tools though). Basically took the wheel off, used a 8 and 10 I believe socket torx or wrench to remove the screws (dont quote me on that), and pulled the plastic fender back to change brake wear sensor (was broken).
So I'm guessing I need a jack, jack stand, sockets and torx? My uncle gave me what he had left of some very old tools: Not sure if I can still use these (some are rusty and old)? |
Appreciate
0
|
11-03-2016, 06:46 PM | #6 |
Lieutenant
187
Rep 589
Posts |
Buy this set from sears:
https://www.craftsman.com/products/c...ket-wrench-set Get this ratchet set: http://www.sears.com/craftsman-11-pc...8&blockType=G8 And these sockets: http://www.harborfreight.com/10-pc-3...ket-61300.html http://www.harborfreight.com/10-pc-1...ket-61345.html I use this ratchet all the time: http://www.sears.com/craftsman-3-8-i...&blockType=G17 Get this breaker bar for the wheels: http://www.harborfreight.com/12-in-d...bar-67933.html And these sockets: http://www.harborfreight.com/10-pc-1...ket-61286.html The univeral joint set from Harbor Freight is junk, I'd get these instead: http://www.sears.com/craftsman-3-pc-...1&blockType=G1 This set of extensions from AutoZone is fairly cheap and works well. The wobble is useful: http://www.autozone.com/ratchets-soc...et/914027_0_0/ This screwdriver set is excellent: http://www.harborfreight.com/8-piece...set-94607.html I like these jack stands because they have the backup locking pin: https://www.google.com/url?sa=t&rct=...NKMnIdUHhvEjag I have this jack, but it's not low enough to reach the front jacking point. I have to drive it up ramps first to get the jack underneath. If you're just lifting one side at a time, it might work. http://www.harborfreight.com/3-ton-l...ump-61253.html You might get the Harbor Freight 1/2 inch torque wrench for torquing your wheels...they recently changed them and the new ones aren't as good. I think the old ones were made in Taiwan and the new ones are made in China, so you might try to find a Made in Taiwan one. They go on sale for $9.99 pretty often. |
Appreciate
0
|
11-03-2016, 06:46 PM | #7 |
Private
20
Rep 77
Posts |
|
Appreciate
0
|
11-04-2016, 12:37 AM | #8 |
Second Lieutenant
48
Rep 272
Posts |
Thanks everyone that posted. For now just to get to the tpms and possibility do the brakes/oil change, could I use the following:
Quote:
Thanks Last edited by BMWMusician; 11-04-2016 at 01:22 AM.. |
Appreciate
0
|
11-04-2016, 04:41 AM | #9 |
Lieutenant
187
Rep 589
Posts |
Yeah, you can probably get by with just that stuff for the TPMS. Removing all the 8mm bolts for the wheel liner by hand can get really annoying, I use an adapter like this http://www.sears.com/craftsman-hex-t...p-00926352000P with a drill. You can do it by hand, it just takes a while.
For brakes and oil you'll want 3/8 inch sockets...the 42 piece set comes with a 3/8 ratchet but you may need the extra leverage from a longer ratchet for some of the bolts. |
Appreciate
0
|
11-04-2016, 12:06 PM | #10 | ||
Second Lieutenant
48
Rep 272
Posts |
Quote:
Quote:
So these should be enough tools to do that? Or what else would I need to take the wheel off? I would get a impact wrench, but he told me the ones up $100 dont work good. He used a $300 Milwaukee impact wrench that took it off like professional. |
||
Appreciate
0
|
11-04-2016, 02:32 PM | #11 | |
Major General
1900
Rep 6,968
Posts
Drives: 2007 Black/Black 335i e90
Join Date: Apr 2011
Location: Holly, MI
|
Quote:
Jack Stands - Torin https://www.amazon.com/gp/aw/d/B000C...vwL&ref=plSrch Jack https://www.amazon.com/gp/aw/d/B003U...UCL&ref=plSrch As far as tools are concerned, I would start with a quality socket set w/ ratchets. It's hard to go wrong with craftsman. http://m.sears.com/craftsman-311pc-m...p-00944777000P |
|
Appreciate
0
|
11-04-2016, 02:56 PM | #12 |
Colonel
2180
Rep 2,804
Posts |
If you're going to be pulling wheels off often, get a wheel hanger or two. Unless your car has been modified, it has wheel bolts instead of studs and nuts. Not an absolute necessity, but, nice to have.
I got mine from Reverse Logic http://www.reverselogic.us/lug-bolt-guides.html . |
Appreciate
0
|
11-05-2016, 01:13 AM | #13 | |
Second Lieutenant
48
Rep 272
Posts |
Quote:
Can I get started and do what I need with this list below: https://www.craftsman.com/products/c...ket-wrench-set http://www.sears.com/craftsman-11-pc...8&blockType=G8 For the wheels: http://www.harborfreight.com/12-in-d...bar-67933.html And these sockets: http://www.harborfreight.com/10-pc-1...ket-61286.html I plan to invest more, and the right tools later, but for now, just basics to do alot of what I need. Thanks. |
|
Appreciate
0
|
11-05-2016, 01:38 PM | #14 |
Colonel
2180
Rep 2,804
Posts |
If you have a 17mm socket and a really big ratchet and/or a breaker bar you should be ok. The hangers are not a must have but it's difficult lifting the wheels and getting a bolt in by yourself. Some people convert to a conventional stud & nut setup just for this reason.
|
Appreciate
0
|
11-05-2016, 07:11 PM | #15 |
Second Lieutenant
48
Rep 272
Posts |
Recently picked a few tools up. Here's what I got:
I got the craftsman version of the extension, and I went with craftsman 3 ton jacks? Would these work? And if so, then it looks like the harbor freight things and a jack will be enough to get started? |
Appreciate
0
|
11-07-2016, 11:54 AM | #16 |
Captain
32
Rep 826
Posts |
don't forget a wheel chock or a block of something. i like this chock because it's rubber and won't slide. i've driven over it forgetting i chocked the car.
http://www.harborfreight.com/solid-r...ock-96479.html did a quick video yesterday on where to jack the front up especially when lowered. be sure to get the front lifted before the rear if you need to level the car. get a long jack if you can for better reach. https://www.youtube.com/watch?v=0Z5rew9KFRg
__________________
|
Appreciate
0
|
11-08-2016, 11:43 AM | #17 |
Second Lieutenant
48
Rep 272
Posts |
Thanks just got a few more things:
- wheel chocks from lowes - the harbor freight sockets mentioned above - magnetic cup holder (hold all my screws) - small led light from harbor (was free, good to use) I'm slowly getting there. Almost done with a basic set. |
Appreciate
0
|
11-08-2016, 01:23 PM | #18 |
Lieutenant
187
Rep 589
Posts |
You may want to wait for the holiday sales before you buy much else. The Harbor Freight and other basic stuff you've already gotten don't really go on sale, but Sears/Lowes/Home Depot have pretty good deals on other sets for Black Friday.
|
Appreciate
0
|
11-08-2016, 02:06 PM | #19 | |
Second Lieutenant
48
Rep 272
Posts |
Quote:
What more do I need or should I be set for now and upgrade when I find it on sale? This is what I have so far (a lot of these extra stuff I already had, just decided to list them). - 42 craftsman piece you mentioned - 11 pc wrench set from sears you mentioned - the 4pc extensions you mentioned but from craftsman - 3 ton pair jack stands from craftsman - hf socket set you mentioned for the wheels - magnetic cup holder for the screws - box of latex gloves - led light - jack adaptor for my car - multimeter - oil extractor (for power steering) - few funnels to put oil/ps in. - wheel chocks from lowes - Phillip screw drivers/flathead and pliers The next things I was looking for was a low profile jack/ harbor freight breaker bar and that should be enough to get started? Or do I need the universal joints? Thanks for all the help! |
|
Appreciate
0
|
11-08-2016, 04:35 PM | #20 |
Lieutenant
140
Rep 476
Posts |
I didn't see the torx/etorx listed. At some point you'll need them. Diy the jack pad from a hockey puck. I timed myself, and I made 3 of them in under 30 mins using a reciprocating saw (time included making a template).
I realize that you're asking about tools, but get some consumables as well; few cans of brake cleaner, penetrating oil, shop towels, etc. |
Appreciate
0
|
11-08-2016, 08:38 PM | #21 |
Colonel
2180
Rep 2,804
Posts |
I bought a 2ton low profile jack from Harbor Freight (Pittsburgh brand). I haven't used it a lot, but, so far so good. It's the aluminum one that is a bit more expensive than steel but so much easier to move around. The vertical reach is ~16" which I think is adequate.
And maybe I'm telling you something you know, but do research and take advice on lifting the car and getting it on jackstands. Use this forum and others - wealth of good info. |
Appreciate
0
|
11-08-2016, 09:52 PM | #22 | |
Second Lieutenant
48
Rep 272
Posts |
Quote:
Did I make a mistake purchasing this jack stand? http://www.sears.com/craftsman-3-ton...1&blockType=G1 |
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|