WALNUT BLAST in Cleveland Ohio $350

FRMTL2_335i · 03-14-2016, 05:41 PM

Hello guys, I've been doing walnut blasting for the n54s in my area and wanted to see if there is any interest here in the forums.
Here is how it usually works;
Drop off the car in the morning before work or night before and I'll get it done by the time you are off work.
I take my sweet time doing it to ensure I get the last bit of carbon deposit off each cylinder.
Price is $350 with new gaskets. I can do OFH gasket at the same time for an extra $50.
If you get 2+ cars interested I will give you a discount depending on amount of cars.
In order to be eligible for a discount both, or whatever amount of people that are going into group discount, must pay a $100 deposit.

You can text me anytime at 216-402-6005
I was a Master tech and I am ASE certified. If you need any other work done just let me know.
I can also install jb4, backend flash, performance parts, etc.

Thanks for reading

FRMTL2_335i · 03-19-2016, 09:07 PM

Bump

SabineBimmer · 03-21-2016, 09:39 PM

Thanks for sharing! May need your services in the future. In East Lansing but will be worth it.

FRMTL2_335i · 03-30-2016, 12:34 AM

Quote:

Originally Posted by SabineBimmer

Thanks for sharing! May need your services in the future. In East Lansing but will be worth it.

Cool, just let me know!

prima_materia · 04-05-2016, 03:23 AM

This is great. Do you do N55 by chance?

I live a little south; Akron-ish area. Getting a VRSF catless DP very soon (possible install?); and being that my 335 has some miles on it a walnut blast sounds like it's about time.

FRMTL2_335i · 04-06-2016, 12:38 AM

Quote:

Originally Posted by PrimaMateria

This is great. Do you do N55 by chance?

I live a little south; Akron-ish area. Getting a VRSF catless DP very soon (possible install?); and being that my 335 has some miles on it a walnut blast sounds like it's about time.

I think it's the same adapter! I'll look into it and let you know

I could install dp too!

prima_materia · 04-06-2016, 03:01 AM

Quote:

Originally Posted by FRMTL2_335i

I think it's the same adapter! I'll look into it and let you know

I could install dp too!

Sounds good, just let me know. It'll probably be within the coming months that I plan to do a WB, gotta throw some money towards coils and plugs and get a few tools to get that done. The catless DP I thought about doing, but honestly I just don't feel like messing with it and would rather have someone else do it haha.

Fred_Boosted · 04-21-2016, 07:52 AM

OMG I got mine done in dealer for $600 in last November.

PTMedg · 04-21-2016, 08:10 AM

Wish you were in Boston, I'd def jump on that

meekz · 04-29-2016, 11:30 PM

All the way in Grand Rapids...need this though

FRMTL2_335i · 06-15-2016, 01:58 PM

running a summer special.... $275!

Gunner_27 · 07-01-2016, 01:52 PM

Quote:

Originally Posted by FRMTL2_335i

Hello guys, I've been doing walnut blasting for the n54s in my area and wanted to see if there is any interest here in the forums.
Here is how it usually works;
Drop off the car in the morning before work or night before and I'll get it done by the time you are off work.
I take my sweet time doing it to ensure I get the last bit of carbon deposit off each cylinder.
Price is $350 with new gaskets. I can do OFH gasket at the same time for an extra $50.
If you get 2+ cars interested I will give you a discount depending on amount of cars.
In order to be eligible for a discount both, or whatever amount of people that are going into group discount, must pay a $100 deposit.

You can text me anytime at 216-402-6005
I was a Master tech and I am ASE certified. If you need any other work done just let me know.
I can also install jb4, backend flash, performance parts, etc.

Thanks for reading

Hey , I am getting a remus exhaust, it has quad tips, 335 have bi tips, Remus provides a cut out that user needs to use and cut off a little bit of the bumper, do you think you can help with install ?

Will also need a saw to cut oem exhaust . Remus will slide on top of the cut area and gets clamped.

Let me know what you think.

milfriez · 08-22-2016, 03:49 PM

Is this still going on? I'm over in Pittsbugh, but need to get it done ASAP. Was considering a drive to VA to get it done, and I have family there, but Cleveland is much closer.

Let me know if services are still being offered, and if it's weekday or weekends availability. Obviously, I wouldn't be heading to work, since I don't live in OH

Thanks!

03-14-2016, 05:41 PM	#1
FRMTL2_335i Major 76 Rep 1,071 Posts Drives: E92 335i Join Date: Mar 2013 Location: ohio iTrader: (1)	WALNUT BLAST in Cleveland Ohio $350 Hello guys, I've been doing walnut blasting for the n54s in my area and wanted to see if there is any interest here in the forums. Here is how it usually works; Drop off the car in the morning before work or night before and I'll get it done by the time you are off work. I take my sweet time doing it to ensure I get the last bit of carbon deposit off each cylinder. Price is $350 with new gaskets. I can do OFH gasket at the same time for an extra $50. If you get 2+ cars interested I will give you a discount depending on amount of cars. In order to be eligible for a discount both, or whatever amount of people that are going into group discount, must pay a $100 deposit. You can text me anytime at 216-402-6005 I was a Master tech and I am ASE certified. If you need any other work done just let me know. I can also install jb4, backend flash, performance parts, etc. Thanks for reading __________________ FFTEC 6466 Gen2, MHD Flash Tuned by Wedge, BMS PI Kit, FUEL-IT Stg 3 pump, HALTECH PS-1000, MFactory LSD w/lock down brace, ECS Trailing Arms, M3 control arms, M3 brace, DGR Coilovers, N20 tmap sensor, BMS OCC, VRSF exhaust w/4" tips, VRSF CP, Tial BOV. BigTom FMIC, Msport front & rear, m3 sides skirts.
	Appreciate 0 Tweet Quote

03-19-2016, 09:07 PM	#2
FRMTL2_335i Major 76 Rep 1,071 Posts Drives: E92 335i Join Date: Mar 2013 Location: ohio iTrader: (1)	Bump __________________ FFTEC 6466 Gen2, MHD Flash Tuned by Wedge, BMS PI Kit, FUEL-IT Stg 3 pump, HALTECH PS-1000, MFactory LSD w/lock down brace, ECS Trailing Arms, M3 control arms, M3 brace, DGR Coilovers, N20 tmap sensor, BMS OCC, VRSF exhaust w/4" tips, VRSF CP, Tial BOV. BigTom FMIC, Msport front & rear, m3 sides skirts.
	Appreciate 0 Quote

03-21-2016, 09:39 PM	#3
SabineBimmer Lieutenant 765 Rep 591 Posts Drives: 2009 e92 335i LBlue Met Join Date: May 2011 Location: East Lansing, Michigan iTrader: (0)	Thanks for sharing! May need your services in the future. In East Lansing but will be worth it.
	Appreciate 0 Quote

04-05-2016, 03:23 AM	#5
prima_materia Private First Class 58 Rep 165 Posts Drives: 11' BMW 335i Sedan XDrive LCI Join Date: Jan 2016 Location: Ohio iTrader: (0)	This is great. Do you do N55 by chance? I live a little south; Akron-ish area. Getting a VRSF catless DP very soon (possible install?); and being that my 335 has some miles on it a walnut blast sounds like it's about time. __________________ JB4 ISO Map 7 @ 20psi, MHD/BMS e85 BEF, ISO_14 Firmware, xHP Stage 3 TCU Flash, Flex Fuel Adapter, Rev3 Connect-Kit, 50% e85 mix/93 octane, K&N drop-in filter, ER Chargepipe, JB4 CAN-flap disabled, VRSF Catless DP, VRSF 7in. FMIC,
	Appreciate 0 Quote

04-21-2016, 07:52 AM	#8
Fred_Boosted Captain 90 Rep 632 Posts Drives: 335i Join Date: Nov 2011 Location: USA iTrader: (1) Garage List 2010 BMW 335i [8.00]	OMG I got mine done in dealer for $600 in last November.
	Appreciate 0 Quote

04-21-2016, 08:10 AM	#9
PTMedg Private 13 Rep 57 Posts Drives: 09' E93 335i Join Date: Mar 2016 Location: Massachusetts iTrader: (0) Garage List 2009 BMW 335i [0.00]	Wish you were in Boston, I'd def jump on that
	Appreciate 0 Quote

04-29-2016, 11:30 PM	#10
meekz Private First Class 37 Rep 175 Posts Drives: 2008 335xi Join Date: Apr 2014 Location: Michigan iTrader: (1)	All the way in Grand Rapids...need this though
	Appreciate 0 Quote

06-15-2016, 01:58 PM	#11
FRMTL2_335i Major 76 Rep 1,071 Posts Drives: E92 335i Join Date: Mar 2013 Location: ohio iTrader: (1)	running a summer special.... $275! __________________ FFTEC 6466 Gen2, MHD Flash Tuned by Wedge, BMS PI Kit, FUEL-IT Stg 3 pump, HALTECH PS-1000, MFactory LSD w/lock down brace, ECS Trailing Arms, M3 control arms, M3 brace, DGR Coilovers, N20 tmap sensor, BMS OCC, VRSF exhaust w/4" tips, VRSF CP, Tial BOV. BigTom FMIC, Msport front & rear, m3 sides skirts.
	Appreciate 0 Quote

08-22-2016, 03:49 PM	#13
milfriez Private First Class 30 Rep 106 Posts Drives: 2007 TiAg 335xi Join Date: Oct 2015 Location: Western PA iTrader: (1)	Is this still going on? I'm over in Pittsbugh, but need to get it done ASAP. Was considering a drive to VA to get it done, and I have family there, but Cleveland is much closer. Let me know if services are still being offered, and if it's weekday or weekends availability. Obviously, I wouldn't be heading to work, since I don't live in OH Thanks! Last edited by milfriez; 08-23-2016 at 08:18 AM..
	Appreciate 0 Quote