|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
[E91] 320d flashing alpina D3 software
|
|
06-10-2016, 06:57 PM | #1 |
New Member
5
Rep 13
Posts |
[E91] 320d flashing alpina D3 software
Hello, i have E91 2006.06 320D Automatic transmission and i tryed to flash Alpina D3 using this thread info http://www.e90post.com/forums/showthread.php?t=709020, used D+KCAN cable with WinKFP, by these steps:
"in WINKFPt this software is marked as 7811921 under DDE604. You go to Comfort mode, click on Choose ZUSB and find 7811921 somewhere in DDE604 .. Then OK, enter VIN and DONE. Then click on Program and it should start flash. I used classic OBD K-Line cable and I haven't used any battery charger since the flash is not longer than 15 minutes." flashing was ok, and after flash i got transmission error, dsc error and so on... also tryed: "after doing this coding the car will be Dead and show a gear warning on cluster but this can be fixed by correctly updating the NCSexpert... Here is what you do: 0-Start ignition with cluster lights on 1-Load NCSexpert 2-File Use EXPERTMODE profile and click ok 3-(F1) Vin/ZCS/FA 4-(F3) SG ausw 5-Choose E89 chassis click ok 6-Choose CAS click ok 7-(F6) Back 8-(F4) Read ECU and pick EGS module click ok 9-Press F3 (execute JOB) 10-After it says coding ended your done! 11-Close out NCSexpert" Coded was fine also, but nothing changed, still transmission error and it says that it is defective, also i cant start my car anymore.. also tryed to clean errors with INPA same problem. The tools i used http://www.e90post.com/forums/showthread.php?t=1220039.. Don't know what to do... how to flash stock back again... |
06-10-2016, 07:16 PM | #2 |
New Member
5
Rep 13
Posts |
Is this cas module could be a problem ?
Code:
E R R O R M E M O R Y ----------------------- Date: 11.06.2016 00:19:13 Model: E89X Scope: all control modules. JobStatus: OKAY Quantity: 21 ----------------------------------------------------------------- ADR Gen. name JobStatus Number of errors Error code Kind of error 00 JBBF OKAY 1 Error stored C915 64 01 MRS OKAY No Error stored 17 EKP OKAY 1 Error stored CED4 28 18 EGS OKAY 5 Error stored CF17 64 CF16 64 CF15 64 CF14 64 CF21 34 36 TEL OKAY No Error stored 3C CDC OKAY No Error stored 3F ASK OKAY No Error stored 40 CAS OKAY 3 Error stored A0B3 28 A0B1 28 A110 28 41 DWA OKAY No Error stored 44 SHD/MDS OKAY No Error stored 47 ANTTU OKAY No Error stored 50 SINE OKAY No Error stored 56 FZD OKAY 1 Error stored A670 28 60 KOMBI OKAY 4 Error stored A3B2 20 A3AD 60 A3AE 60 A3AF 60 62 MOSTGW OKAY No Error stored 63 MASK/CCC OKAY No Error stored 67 ZBE OKAY No Error stored 72 FRM OKAY No Error stored 73 CID OKAY 1 Error stored A468 64 78 KLIMA OKAY 5 Error stored E717 64 E71A 64 E71B 64 9C53 68 E720 64 A0 CCC OKAY No Error stored ================================================================= |
Appreciate
0
|
06-10-2016, 09:30 PM | #3 |
BimECU
193
Rep 759
Posts |
Did you try to flash your EGS back to stock?
looks like your DDE is not communicating anymore, try flashing stock back, if it doesnot work you will need to try NFS |
Appreciate
0
|
06-11-2016, 07:50 AM | #5 | |
New Member
5
Rep 13
Posts |
Quote:
Last edited by Nobless; 06-11-2016 at 08:38 AM.. |
|
Appreciate
0
|
06-11-2016, 12:10 PM | #6 |
New Member
5
Rep 13
Posts |
just updated in comfort mode CAS, then DDE, and EGS, now no errors in dashlight but car still doesnt start.. also DDE comeback in the list but still something wrong have some errors in inpa, and i could not delete few of them
Last edited by Nobless; 06-11-2016 at 12:15 PM.. |
Appreciate
0
|
06-11-2016, 01:32 PM | #7 | |
New Member
5
Rep 13
Posts |
Fixed, modules wasn't synced, used this guide
Quote:
|
|
Appreciate
0
|
06-11-2016, 03:49 PM | #8 | ||
Colonel
529
Rep 2,504
Posts |
Quote:
|
||
Appreciate
0
|
06-11-2016, 05:42 PM | #9 |
BimECU
193
Rep 759
Posts |
Nice!
pretty strange your CAS has no VIN and still works anyways good it works now |
Appreciate
0
|
Bookmarks |
|
|