E90Post
 


The Tire Rack
 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > General E90 Sedan / E91 Wagon / E92 Coupe / E93 Cabrio > Oil Pressure Light at Idle



Reply
 
Thread Tools Search this Thread
      06-03-2015, 04:54 AM   #1
cjcurtis
Registered
United Kingdom
4
Rep
3
Posts

Drives: E91 318i (143bhp)
Join Date: May 2015
Location: Cheshire

iTrader: (0)

Oil Pressure Light at Idle

Hi

I brought a 2008 318i (143) in the UK last year and it has been great until the last 3 months. I started to get a recurring problem once the engine was warmed up (after 30 minutes driving) when i come to a stop the red oil warning light would come on. If i turned off the engine and restarted the light was gone and would stay off for a day or two until it happened again.

I started monitoring this and found that when i can to a stop the revs would drop to aprox 600 momentarily and there would be a slight smell of burning oil.

This problem was now happening on every journey even my 35 minute drive to work.

I had the oil pressures check and they are all good. I have a fault reader and found the following fault codes:

30C1 Engine-Oil pressure control static
2EF7 MAP thermostat, activation
29F3 Fuel Low-pressure sensor, electric

If i cleared the codes and waited for the oil light to come on again i always had 30C1 and 2EF7.

So doing some research i found there was a "Hydraulic Valve" or "Oil Pressure Relief valve" "11417584990" mounted in the engine block. I managed to find a replacement on eBay although it was a used part. And i replaced it, all was fine for a week then it happened again.

See: http://www.etk.cc/bmw/EN/search/sele...73/11417584990



So i am thinking either the used part was no good or there is something else wrong.

Has anyone else had this issue?
Appreciate 0
      03-29-2016, 09:11 AM   #2
EMI
Registered
3
Rep
4
Posts

Drives: Bmw
Join Date: Mar 2016
Location: Rom

iTrader: (0)

Hello, you have solved the problem??
and I have the same problem at LCI E90 318i
I have 2 errors 30C1 Engine-Oil pressure control static
2EF7 MAP thermostat, activation
you solved this problem?
Appreciate 0
Reply

Bookmarks

Tags
30c1, light, oil, pressure

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:34 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST