|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Having some trouble INPA/PORTS/...Need Advice. - Fixed.
|
|
12-14-2011, 03:51 PM | #1 |
Colonel
83
Rep 2,132
Posts
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC
|
Having some trouble INPA/PORTS/...Need Advice. - Fixed.
UPDATE:
Ok, so i've changed the Ports like i said i was going to below and everything worked flawlessly. I didnt have time to code anything but INPALOAD.exe loaded and Read everything error free, Also i followed the DIY Guide on to create a back up with NCSEXPER and that worked flawlessly as well. So no errors, i will try and code something later this week. Thank's. --------- I have a 07 335xi i beleive its build 03/07. Cable ordered from Ebay, automotive-tool. The Cable most ppl are ordering. I followed the DIY and went back to recheck numerous times. but when i load INPALOAD.exe Nothing comes on, Both Battery and Ignition are blank Circles. I have followed everything to change on port settings and such, Now the only thing that i am confused is... PORTS... Communications Ports (COM1) USB Serial Port (COM4) </= Do i change this to COM1 as well? When i try to change it to see what happends, it says com1 in use, and if you combine/change it could lead to some errors/changes. EDIT: Changed COM1 to COM2 and USB Serial Port(COM4) to COM1...Worked Perfect! Should've done and tried before posting on here, but oh well maybe someone will come across that needs this lil' info and there ya go lol.. Thank's.
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
. Last edited by BES335xi; 12-14-2011 at 05:41 PM.. |
12-14-2011, 04:04 PM | #3 | |
Colonel
83
Rep 2,132
Posts
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC
|
Quote:
I'm going to mess around and change/disable the ports around a bit and see if i get any results i guess, no idea of what else to do. Thx
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
. |
|
Appreciate
0
|
12-14-2011, 05:08 PM | #4 |
Colonel
83
Rep 2,132
Posts
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC
|
UPDATE: Above at original post. Everything is working fine now.
Thank you. /Thread.
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
. |
Appreciate
0
|
Bookmarks |
|
|