****Quick Question HOMIES****

JBiddy · 10-15-2009, 02:12 PM

Does anyone know if 18' e46 m3 wheels fit my e92 335i???

am not really sure how these offsets things work

lol sry!

thanks, as always

Craig@SupremePower · 10-15-2009, 02:19 PM

typically they work but wheels widths & offsets would help to verify!

JBiddy · 10-15-2009, 02:25 PM

Quote:

Originally Posted by Craig@SupremePower

typically they work but wheels widths & offsets would help to verify!

its the OEM 18inch e46 M3 wheels

RevC · 10-15-2009, 02:29 PM

Quote:

Originally Posted by JBiddy

its the OEM 18inch e46 M3 wheels

those are 18x8, 18x9 right? 47mm offset

think they would fine, some spacers for sure

Craig@SupremePower · 10-15-2009, 02:32 PM

i believe their 18x8 - ET47 and 18x9 ET26 .... front needs a spacer for sure and rears should be ok.

Sal@AUTOcouture · 10-15-2009, 02:33 PM

Quote:

Originally Posted by Craig@SupremePower

i believe their 18x8 - ET47 and 18x9 ET26 .... front needs a spacer for sure and rears should be ok.

+1

OEKlM · 10-15-2009, 02:33 PM

Quote:

Originally Posted by Craig@SupremePower

i believe their 18x8 - ET47 and 18x9 ET26 .... front needs a spacer for sure and rears should be ok.

+1

BTW did ur friend figure out all the parts needed for the hardtop? I saw some post on e46f

JBiddy · 10-15-2009, 02:36 PM

Quote:

Originally Posted by OEKlM

+1

BTW did ur friend figure out all the parts needed for the hardtop? I saw some post on e46f

yeah he did, i think the guy that sold him the hardtop knew some guy that had the kit! so i think we will be putting it on this weekend...

JBiddy · 10-15-2009, 02:36 PM

Quote:

Originally Posted by RevC

those are 18x8, 18x9 right? 47mm offset

think they would fine, some spacers for sure

Quote:

Originally Posted by Craig@SupremePower

i believe their 18x8 - ET47 and 18x9 ET26 .... front needs a spacer for sure and rears should be ok.

Quote:

Originally Posted by AutoCouture

+1

thanks guys!!!!

JBiddy · 10-15-2009, 02:38 PM

i wouldnt rub right???

so lets say i would buy 19s for next spring, what offset do e92 usually use. remeber am kinda slammed so i dont want to rub... thanks again

RevC · 10-15-2009, 02:41 PM

Quote:

Originally Posted by JBiddy

i wouldnt rub right???

so lets say i would buy 19s for next spring, what offset do e92 usually use. remeber am kinda slammed so i dont want to rub... thanks again

depends on the wheels/tires..i run 30,37r,rounded sidewall no rubbing with a 10 rear wheel/275 tire,pretty much as close you can cut it with stock height. that wouldrub for sure if ifts slammed, but again i'd say it depends on many factors..

JBiddy · 10-15-2009, 02:45 PM

Quote:

Originally Posted by RevC

depends on the wheels/tires..i run 30,37r,rounded sidewall no rubbing with a 10 rear wheel/275 tire,pretty much as close you can cut it with stock height. that wouldrub for sure if ifts slammed, but again i'd say it depends on many factors..

Lets say some V710, 30 front 37 et rear, with 265's rear....will that rub

RevC · 10-15-2009, 02:46 PM

Quote:

Originally Posted by JBiddy

Lets say some V710, 30 front 37 et rear, with 265's rear....will that rub

are your fenders rolled...and what kind of drop are you sitting on..if you threw on some toyos, think you would be just fine, btw i ran a 37 offset in the rear with a 10" wheel, think those vmrs are 9.5?

Craig@SupremePower · 10-15-2009, 02:47 PM

My HRE's are 19x8.5 ET35 and 19x10 ET30 rear... with 235/35's and 265/30 .... if i go LM their 19x10 ET25 rears is likely what i would get!!

Craig@SupremePower · 10-15-2009, 02:48 PM

V710's are 19x9.5'' ET33 rear....

Quote:

Originally Posted by JBiddy

Lets say some V710, 30 front 37 et rear, with 265's rear....will that rub

Craig@SupremePower · 10-15-2009, 02:49 PM

Toyo's and Falkens are very rounded to gain extea clearance!

RevC · 10-15-2009, 02:49 PM

Quote:

Originally Posted by Craig@SupremePower

My HRE's are 19x8.5 ET35 and 19x10 ET30 rear... with 235/35's and 265/30 .... if i go LM their 19x10 ET25 rears is likely what i would get!!

OEKlM · 10-15-2009, 02:51 PM

Quote:

Originally Posted by JBiddy

yeah he did, i think the guy that sold him the hardtop knew some guy that had the kit! so i think we will be putting it on this weekend...

nice.... im looking to pick up an E46M vert also if my car sells... then again if i find a good deal at a dealer ill trade my car in =)

Sal@AUTOcouture · 10-15-2009, 02:55 PM

you're gonna need a rolling me thinks

JBiddy · 10-15-2009, 02:58 PM

so the lower the et, the more aggresive the wheel?

RevC · 10-15-2009, 02:58 PM

Quote:

Originally Posted by JBiddy

so the lower the et, the more aggresive the wheel?

yessir

RevC · 10-15-2009, 02:59 PM

Quote:

Originally Posted by OEKlM

nice.... im looking to pick up an E46M vert also if my car sells... then again if i find a good deal at a dealer ill trade my car in =)

sweet, i almost bought this, guy wanted 31!
http://www.autotrader.com/fyc/vdp.js...e&rdpage=thumb

10-15-2009, 02:12 PM	#1
JBiddy Brigadier General 197 Rep 3,840 Posts Drives: F82 ///M Join Date: Apr 2008 Location: Northern/N.J iTrader: (9)	**Quick Question HOMIES** Does anyone know if 18' e46 m3 wheels fit my e92 335i??? am not really sure how these offsets things work lol sry! thanks, as always __________________ ///M
	Appreciate 0 Tweet Quote

10-15-2009, 02:19 PM	#2
Craig@SupremePower G.O.A.T.! 1000 Rep 74,998 Posts Drives: '18 GMC Yukon XL Join Date: Mar 2008 Location: New Jersey iTrader: (14)	typically they work but wheels widths & offsets would help to verify!
	Appreciate 0 Quote

10-15-2009, 02:32 PM	#5
Craig@SupremePower G.O.A.T.! 1000 Rep 74,998 Posts Drives: '18 GMC Yukon XL Join Date: Mar 2008 Location: New Jersey iTrader: (14)	i believe their 18x8 - ET47 and 18x9 ET26 .... front needs a spacer for sure and rears should be ok.
	Appreciate 0 Quote

10-15-2009, 02:38 PM	#10
JBiddy Brigadier General 197 Rep 3,840 Posts Drives: F82 ///M Join Date: Apr 2008 Location: Northern/N.J iTrader: (9)	i wouldnt rub right??? so lets say i would buy 19s for next spring, what offset do e92 usually use. remeber am kinda slammed so i dont want to rub... thanks again __________________ ///M
	Appreciate 0 Quote

10-15-2009, 02:47 PM	#14
Craig@SupremePower G.O.A.T.! 1000 Rep 74,998 Posts Drives: '18 GMC Yukon XL Join Date: Mar 2008 Location: New Jersey iTrader: (14)	My HRE's are 19x8.5 ET35 and 19x10 ET30 rear... with 235/35's and 265/30 .... if i go LM their 19x10 ET25 rears is likely what i would get!!
	Appreciate 0 Quote

10-15-2009, 02:49 PM	#16
Craig@SupremePower G.O.A.T.! 1000 Rep 74,998 Posts Drives: '18 GMC Yukon XL Join Date: Mar 2008 Location: New Jersey iTrader: (14)	Toyo's and Falkens are very rounded to gain extea clearance!
	Appreciate 0 Quote

10-15-2009, 02:55 PM	#19
Sal@AUTOcouture 733 Rep 10,105 Posts Drives: E93 M3, E36 M3 Join Date: Feb 2007 Location: Sofla iTrader: (30)	you're gonna need a rolling me thinks
	Appreciate 0 Quote

10-15-2009, 02:58 PM	#20
JBiddy Brigadier General 197 Rep 3,840 Posts Drives: F82 ///M Join Date: Apr 2008 Location: Northern/N.J iTrader: (9)	so the lower the et, the more aggresive the wheel? __________________ ///M
	Appreciate 0 Quote