E90Post
 


Studio RSR
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > DIY Powered seat retrofit (WIP)



Reply
 
Thread Tools Search this Thread
      01-30-2011, 01:44 PM   #23
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)

OK ... I think I will do the same ... it's the easiest way

Yes, and its unlikely that you would use the positioning and the pump at the same time ... but I think there must be a good reason that they separated it.

That brings me to another question: if the memory is working, does the lumbar and the side bolsters also adjust to the saved position refering to the different keys? Or is it just about the positioning?
EDIT: ... lumbar and side bolsters are not supported


Ive made pictures of the connectors today ... there are 2 questions i have ... can you help me with them?

What is Pin6 of X279 for and why are Pin2 and Pin3 also existing in X279??

EDIT: Found the answer to Pin2 and Pin3 ... they have to be there because of the heated seats

Next thing is ... I don't have Pin9 ... after a look (or two ) at the WDS. I found another interesting thing: Pin7 has to be connected to Pin4 to get lumbar and side bolsters working for cars between 03.2007 and 09.2007

---------------------

First 3 pictures: X279
Last 3 pictures: X275

Do your Connectors look the same?

Greetings!
Attached Images
      

Last edited by dasammy; 02-03-2011 at 10:06 AM..
Appreciate 0
      02-02-2011, 11:04 AM   #24
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)



function test

switch on sound! Lumbar and side bolsters are just hearable

everything works fine!

First try: connected Pin8 to ground and Pin4 to 12V+
Result: just the positioning was working

Second try: added ground to Pin13 and 12V+ to Pin7
Result: lumbar and side bolsters also working

Power Supply: rebuilt PC power supply

Last edited by dasammy; 02-02-2011 at 01:15 PM..
Appreciate 0
      02-02-2011, 03:58 PM   #25
woodpecka
Major
woodpecka's Avatar
Canada
68
Rep
1,026
Posts

Drives: E91
Join Date: May 2010
Location: Montreal

iTrader: (2)

heh nice test mate!

FYI, yes the side bolster and lumbar are not managed by memory. Only the positions.

I can't see your pictures, the link are broken.

[edit]
My driver seat has pin # 2-3-4-8-9-13+... not pin #7

Does your pin #7 is large like this?

Last edited by woodpecka; 02-02-2011 at 06:00 PM..
Appreciate 0
      02-03-2011, 02:04 AM   #26
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)

Thx ... maybe I'll make a better video today.

I'll fix the links after work.
EDIT: fixed them ...

No, I also wondered why Pin7 isnt that large like Pin9 ... then I looked into the WDS and saw, that the Fuse for Pin7 (F37) is just 10A ... the Fuse for Pin9 (F33) is 30A ... don't know why they changed it ... but maybe the Fuse was designed a bit to big in the years before 03.2007. So they better changed it ... but who knows ...?

What about the passenger side? Do you also have Pin6?

Greetings!

Last edited by dasammy; 02-03-2011 at 10:07 AM..
Appreciate 0
      02-03-2011, 09:42 PM   #27
woodpecka
Major
woodpecka's Avatar
Canada
68
Rep
1,026
Posts

Drives: E91
Join Date: May 2010
Location: Montreal

iTrader: (2)

If your pin7 is supposed to be on a Fuse 10A, it mean that it doesn't use a lot of power. So, it's more safe to use it on the module power wire.

There are my picture. As you can see, I have the pump power on the pin #9 as defined by the diagram:

x275






x279



Last edited by woodpecka; 02-04-2011 at 11:21 PM..
Appreciate 1
      02-03-2011, 09:51 PM   #28
woodpecka
Major
woodpecka's Avatar
Canada
68
Rep
1,026
Posts

Drives: E91
Join Date: May 2010
Location: Montreal

iTrader: (2)

Concerning the passenger pin #6, would it be possible that it is used to deactivate the airbag when a child sit on it? (Passenger airbag deactivation light)
Appreciate 0
      02-04-2011, 01:39 AM   #29
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)

Hi!

Thx for sharing your pics!
Hmm ... interesting pin configuration. It seems like the heated seat at the drivers side is powered by the seat module and the heated seat at the passenger side is powered by the junction box.

Your X275 has the 2 bus pins (2+3) and your X279 only has the PWM pin (1 and pin5) ... I didnt thought that such a setting is possible.

About pin6 ... I'm relieved that you also have this pin. First I thought thats a function for E92/E93 ... maybe the easy entry or something ...
Your assumption that it could be the airbag deactivation light sounds quite interesting ... can we prove it somehow?

------

To pin7:

I 100% agree with you ... that was my assumption, too.
So connecting it to the power supply of the seat module would be even safer because of the low power consumption

Greetings!

Last edited by dasammy; 02-04-2011 at 01:44 AM..
Appreciate 0
      02-04-2011, 06:15 AM   #30
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)

In my eyes it isn't even necessary to disassamble the glove box to connect pin2 and pin3 to the junction box. If you have a look at X15003 / X15004 you can see the bus-structure of the K_BUS. You could connect the cables anywhere you like inside of this network

EDIT: I showed the diagrams of X15003 / 15004 to a process measuring and control technology specialist at our company and he is the same opinion. So it would also be possible to connect the cables to the iDrive Controller

Last edited by dasammy; 02-04-2011 at 06:40 AM..
Appreciate 0
      02-04-2011, 10:36 AM   #31
woodpecka
Major
woodpecka's Avatar
Canada
68
Rep
1,026
Posts

Drives: E91
Join Date: May 2010
Location: Montreal

iTrader: (2)

Quote:
Originally Posted by dasammy View Post
Hi!

Thx for sharing your pics!
Hmm ... interesting pin configuration. It seems like the heated seat at the drivers side is powered by the seat module and the heated seat at the passenger side is powered by the junction box.

Your X275 has the 2 bus pins (2+3) and your X279 only has the PWM pin (1 and pin5) ... I didnt thought that such a setting is possible.
It's in line with the wiring diagrams! There is a small module on the passenger side but it doesn't use the K_CAN.
Appreciate 0
      02-04-2011, 10:37 AM   #32
woodpecka
Major
woodpecka's Avatar
Canada
68
Rep
1,026
Posts

Drives: E91
Join Date: May 2010
Location: Montreal

iTrader: (2)

Quote:
Originally Posted by dasammy View Post
In my eyes it isn't even necessary to disassamble the glove box to connect pin2 and pin3 to the junction box. If you have a look at X15003 / X15004 you can see the bus-structure of the K_BUS. You could connect the cables anywhere you like inside of this network

EDIT: I showed the diagrams of X15003 / 15004 to a process measuring and control technology specialist at our company and he is the same opinion. So it would also be possible to connect the cables to the iDrive Controller
I don't have the I Drive. Where do you think is the other easy access to the K_CAN wires?
Appreciate 0
      02-04-2011, 10:54 AM   #33
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)

Yes, I saw it ... the module is pretty small on the passenger side.
Mine is just as big as the one on the drivers side.

Hmm ... thats a good question ... maybe pin9 and pin11 from the radio connector?
Appreciate 0
      02-04-2011, 02:01 PM   #34
woodpecka
Major
woodpecka's Avatar
Canada
68
Rep
1,026
Posts

Drives: E91
Join Date: May 2010
Location: Montreal

iTrader: (2)

Quote:
Originally Posted by dasammy View Post
Yes, I saw it ... the module is pretty small on the passenger side.
Mine is just as big as the one on the drivers side.

Hmm ... thats a good question ... maybe pin9 and pin11 from the radio connector?
Which year are your seats?

I'm surprised that this passenger seat configuration exist. Are they from an e9X?
Appreciate 0
      02-04-2011, 02:59 PM   #35
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)

They are from 03/2007

Yes, they are from an E92 335i
Appreciate 0
      02-04-2011, 03:16 PM   #36
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)

It's just like I said ... your heating at the passenger side is powered by the junction box and the drivers side is powered by the seat module.

My seats heating are both powered by the seat modules under each seat ... you can see it at the PDF I attached
Attached Images
File Type: pdf Seat Heating with SMBF.pdf (102.4 KB, 2055 views)
Appreciate 0
      02-04-2011, 03:36 PM   #37
woodpecka
Major
woodpecka's Avatar
Canada
68
Rep
1,026
Posts

Drives: E91
Join Date: May 2010
Location: Montreal

iTrader: (2)

Do you have the memory on the passenger seat? This option is not available in the USA/Canada.
Appreciate 0
      02-04-2011, 03:43 PM   #38
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)

No

I think this option isn't available anywhere ^^

Its at least a simple thing:

How should the car "know" when you want your seats to be heated on the passenger side?
There is at least no connection between the heating and the switch in the middle. So there are 2 options how the heating "communicates" with the car:

Option 1) Pin1 (the pulse width modulation) and Pin5
Thats when the junction box manages the heating

... Pin1 is linked to the junction box ... the junction box is linked to the air condition and the air condition is linked to the switch in the middle
The junction box gets a signal from Pin1 ... so it manages the heating


Option 2) Pin2 and Pin3 ... the K_CAN
Thats when the seat module manages the heating

... Pin2 and Pin3 are linked to the junction box ... bla bla
The junction box gets no signal from Pin1 ... so it doesnt manage the heating

K_CAN manages the heating as well as the memory function (drivers side of course)

Last edited by dasammy; 02-04-2011 at 04:14 PM..
Appreciate 0
      02-04-2011, 11:12 PM   #39
woodpecka
Major
woodpecka's Avatar
Canada
68
Rep
1,026
Posts

Drives: E91
Join Date: May 2010
Location: Montreal

iTrader: (2)

Yes, if the seat has the K_CAN module it use the K_CAN network.

If it doesn't had it, it use the SHFA_PWM pulse signal. The heating module is working in parallel than the position motors. So, this last option give me the feeling that the seat can use the motors at the same time than the heating. (Adding the pump on the same power wire should not be an issue than..)
Appreciate 0
      02-05-2011, 12:46 PM   #40
woodpecka
Major
woodpecka's Avatar
Canada
68
Rep
1,026
Posts

Drives: E91
Join Date: May 2010
Location: Montreal

iTrader: (2)

Quote:
Originally Posted by dasammy View Post
Yes, I saw it ... the module is pretty small on the passenger side.
Mine is just as big as the one on the drivers side.

Hmm ... thats a good question ... maybe pin9 and pin11 from the radio connector?
Yes, based on the diagram I agree that the radio connector looks the easiest way. I will do a search about how I can reach the radio from the driver seat.

Have you installed your seats?
Appreciate 0
      02-05-2011, 03:24 PM   #41
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)

Hi!

Today I bridged the pins (8 to 13 and 4 to 7) I didn't solder them. I used these mini connectors. Thats the easiest way and BMW often uses such connectors as I saw in different EBAs so it couldnt be that wrong.
I secured them with a cable tie and fabric tape ...

I will connect the K_CAN to the iDrive Controller.

I install the seats tomorrow ... keep your fingers crossed

When will you install your seats?

Greetings
Appreciate 0
      02-05-2011, 08:19 PM   #42
fdriller9
Banned
United_States
252
Rep
7,089
Posts

Drives: '06 AW 330xi
Join Date: Mar 2009
Location: North Jersey/Philly/NYC

iTrader: (4)

Garage List
2006 330xi  [6.44]
You want powered seats? I would trade my power seats for manual seats...I have tan interior.
Appreciate 0
      02-06-2011, 03:04 PM   #43
woodpecka
Major
woodpecka's Avatar
Canada
68
Rep
1,026
Posts

Drives: E91
Join Date: May 2010
Location: Montreal

iTrader: (2)

Quote:
Originally Posted by dasammy View Post
Hi!

Today I bridged the pins (8 to 13 and 4 to 7) I didn't solder them. I used these mini connectors. Thats the easiest way and BMW often uses such connectors as I saw in different EBAs so it couldnt be that wrong.
I secured them with a cable tie and fabric tape ...

I will connect the K_CAN to the iDrive Controller.

I install the seats tomorrow ... keep your fingers crossed

When will you install your seats?

Greetings
Does these mini connectors works well? Have you bridge the wire on the car or seats side? I plan to do it on the car side.
What are the connectors part #?

Have you finish to install your seats?

I will maybe do it next week.
Appreciate 0
      02-06-2011, 03:38 PM   #44
dasammy
Enlisted Member
2
Rep
42
Posts

Drives: E92 320D
Join Date: Jan 2011
Location: Germany

iTrader: (0)



SUCCESS!!

Yes, these mini-connectors work well. I checked them with a multimeter after connecting the cables. Its a solid connection.

In short:

I disassembled the seats and looked at the connector at the car side. There were 2 things I recognized:

1.) The Power supply of the seat heating module was on Pin9 .. so I had to pin it out and pinned it to pin4 (car side)

2.) The yellow/white cable (pin6) also was at the old passenger seat, but it had no connection to any pin of the connector at the car side
So its completely useless

I tooked the side-airbags and seat belt fastener from my old seats. Airbags and seat belt fastener fit the normal seats as well as the sport seats.
BUT ITS JUST FOR E92/E93 ... FOR E90/E91 AIRBAGS OF THE NORMAL SEATS AND SPORT SEATS ARE DIFFERENT!!

I connected the K_CAN wires to the iDrive by soldering.

The seat positioning wont work if K_CAN is not connected! Lumbar and side bolsters are working, but the positioning wont!
Just after connecting the K_CAN it worked ...

The strange thing about that is: in the tests with my PC power supply it worked like a charm ...

Seat heating is also working ... without coding
Memory buttons are working


Greetings!

EDIT: bridged the wires on the seat side.
Dont know the part # of the connectors ... in Germany you can buy them at any hardware store
__________________
My E92 Coupé

Last edited by dasammy; 02-20-2011 at 06:41 AM..
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:15 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST