BMW Friendly shop!

Welterweight · 07-29-2014, 04:17 PM

Found a great local shop that is BMW friendly with great prices! Akiki & Sons in Hyde Park. They are installing my Dinan Springs after calling around getting quotes from 900-700 they did much better! Also they are blacking out my lower mesh grills. I'm so excited to get the car back looking low and mean!

Welterweight · 07-30-2014, 09:01 PM

Springs installed, alignment and got the front grills painted for half of what all the other shops quoted for springs alone!!!!!

CamboSlice · 07-31-2014, 07:26 PM

Pics?

Welterweight · 07-31-2014, 08:38 PM

I have tons but don't know how to load them hahaha

Island Road · 08-01-2014, 06:43 AM

Upload to a site like imgur and then post here via the "insert Image" button.

Torgus · 08-01-2014, 08:00 AM

Yeah where is the pic of your tint anyways?

Welterweight · 08-01-2014, 12:58 PM

Ok I will have to get one of these sites going brotha. Thanks. For now I have some pics up on my FB for your viewing pleasure.

Brett Oteri MMA

Welterweight · 08-07-2014, 09:47 AM

Here are some pics of the car lowered on Dinan Springs and Painted Lower Mesh Grills. I also installed Black Kidney Grills and Painted reflectors. Today I am dropping her back off at Akiki & Sons for my 7' VRSF FMIC install!!!!

Throw me some feedback and suggestions. Car is new to me 2 months ago and I know it has a long way to go.

3neati · 08-07-2014, 09:50 AM

Nice and clean

Torgus · 08-07-2014, 10:43 AM

Looks nice and clean. Intercooler really helps you getting heat soaked. The stock IC with a tune heat soaks quick.

I would suggest moving the license plate to the toe hook. Looks cleaner imo. Are you an auto? Get those downpipes on as soon as possible after you are FBO protune that bish

Welterweight · 08-07-2014, 11:42 AM

Thanks man. Wish I could just get rid of the damn plate and holder!

I will most likely do Downpipes the end of this month and get Valves cleaned as well. Then its ProTune for sure!

Runs 4.4 0-60 on stock everything and Cobb Stage 1.....Really wanna be in the 3's!

Quote:

Originally Posted by Torgus

Looks nice and clean. Intercooler really helps you getting heat soaked. The stock IC with a tune heat soaks quick.

I would suggest moving the license plate to the toe hook. Looks cleaner imo. Are you an auto? Get those downpipes on as soon as possible after you are FBO protune that bish

Welterweight · 08-09-2014, 07:23 AM

Just got the car back from Akiki & Sons with an alignment as the springs have settled and got my 7" VRSF inter-cooler installed. She looks pretty! I also changed to Map Stage 1+FMIC aggressive ST and wow I feel a huge difference. Only worry now is that I will blow my stock charge pipe. Should that be next on install list? I also plan to do a walnut blast and new plugs soon.

Torgus · 08-09-2014, 08:46 AM

I would do downpipes my stock charge pipe is fine on 18psi, I know it will not be forever but for now it's fine. Same with my DVs not leaking. I'm a big fan of not replacing parts until needed. You can always buy the DPs and CP from VRSF at the same time.

Welterweight · 08-09-2014, 10:57 AM

Downpipes over intake? I will prolly do them both at some point. Maybe I will order them this week. Hahaha. So hard to restrain myself.

Dkhan22 · 08-09-2014, 01:42 PM

Just get BMS dual cone intakes. Like $95. When you do DP you will instantly feel the performance gains.

Torgus · 08-10-2014, 07:44 AM

yeah intake should be 1st, cheap an easy just get DCIs.

dave96dcm · 08-10-2014, 09:37 AM

I'm less than half of $700-$900 springs and alignment. That price is like $300 a hour! Lol. I don't understand how some shops take so long. I'm not rushing, I'm very thorough and it's always under 3 hours for a springs shocks struts install.

Welterweight · 08-10-2014, 01:03 PM

Yeah I almost shit when a local tire shop and bmw shop quoted me close to 1k for install!

SgtKohRea · 08-16-2014, 12:41 PM

I need to get my suspension installed but not too sure where to go. I gave Akiki a call, but they can't schedule me any earlier than Tuesday. Are there any shops that are open over the weekends?

Welterweight · 08-16-2014, 02:33 PM

Not sure man but Leo Akiki is legit if you can wait. Tell me Brett sent you!

SgtKohRea · 08-17-2014, 03:57 PM

Quote:

Originally Posted by Welterweight

Not sure man but Leo Akiki is legit if you can wait. Tell me Brett sent you!

Will do. I'll try to give them a call in the morning and hopefully get my car squared away.
Thanks!

SgtKohRea · 08-18-2014, 10:17 AM

So I called them this morning and the lady I spoke to told me to bring it in because they were pretty open today. Drove down from wakefield, and when I got here, a lady asks if she could help me. I asked if they would be able to work on my car and before she even asked me any other questions, she said they were booked for the day.

I told her I called and was told to come, so she asked me who I spoke with, and of course I didn't get a name. So I thanked her and left.

Went back a couple minutes later to see how long it would take for someone to look at the car. She asked me what kind of BMW it was, when I never mentioned the car, so it was obviously her I spoke to on the phone.

She told me I wouldn't need an appointment, but I just wasted 2 hours driving here and back. So yea, not going to come back.

07-29-2014, 04:17 PM	#1
Welterweight Major 98 Rep 1,321 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	BMW Friendly shop! Found a great local shop that is BMW friendly with great prices! Akiki & Sons in Hyde Park. They are installing my Dinan Springs after calling around getting quotes from 900-700 they did much better! Also they are blacking out my lower mesh grills. I'm so excited to get the car back looking low and mean! __________________ 2009 BSM E92 335xi - RR600's/FBO-VRSF/Apex Arc 8/Wedge E60 MHD/Fuel it Stage 2/BMW PE w/ Dimisa Tips/Alpina TCU/Dinan Springs/RB Inlets/3.5 Bar TMAP
	Appreciate 0 Tweet Quote

07-30-2014, 09:01 PM	#2
Welterweight Major 98 Rep 1,321 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	Springs installed, alignment and got the front grills painted for half of what all the other shops quoted for springs alone!!!!!
	Appreciate 0 Quote

07-31-2014, 07:26 PM	#3
CamboSlice Private 9 Rep 95 Posts Drives: 07 335i E90 Join Date: Jul 2013 Location: Charlotte, NC iTrader: (1) Garage List 2007 BMW 328xi [0.00]	Pics?
	Appreciate 0 Quote

07-31-2014, 08:38 PM	#4
Welterweight Major 98 Rep 1,321 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	I have tons but don't know how to load them hahaha
	Appreciate 0 Quote

08-01-2014, 06:43 AM	#5
Island Road Major 167 Rep 1,254 Posts Drives: 335i Join Date: Mar 2011 Location: Boston iTrader: (5) Garage List 2008 335i [10.00]	Upload to a site like imgur and then post here via the "insert Image" button. __________________ 08 AW 6MT \| MHD \| Wavetrac LSD 3.46 \| AE Quad \| VRSF DP'S \| VRSF 7" IC \| DD Hood / Diffuser\| Mtech Front / Rear\| BMW Performance Splitters / Spoiler \| Wheels 18lb 18x9 SQ \| Hexon RR550 \| TFT Inlets
	Appreciate 0 Quote

08-01-2014, 08:00 AM	#6
Torgus Slow. 3782 Rep 7,151 Posts Drives: Single Turbo N54 on Meth! Join Date: Jun 2012 Location: Boston, MA iTrader: (2) Garage List 2007 BMW E92 [10.00] 2007 BMW E90 [0.00] 2006 BMW E91 [0.00]	Yeah where is the pic of your tint anyways? __________________ E92 ACF ST 6466 + Meth Motiv / E70 #1 fully deleted 2.8 race flash / E70 #2 JBD / E90 & E91 both retired Psalm 144
	Appreciate 0 Quote

08-01-2014, 12:58 PM	#7
Welterweight Major 98 Rep 1,321 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	Ok I will have to get one of these sites going brotha. Thanks. For now I have some pics up on my FB for your viewing pleasure. Brett Oteri MMA
	Appreciate 0 Quote

08-07-2014, 09:47 AM	#8
Welterweight Major 98 Rep 1,321 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	Some pics Here are some pics of the car lowered on Dinan Springs and Painted Lower Mesh Grills. I also installed Black Kidney Grills and Painted reflectors. Today I am dropping her back off at Akiki & Sons for my 7' VRSF FMIC install!!!! Throw me some feedback and suggestions. Car is new to me 2 months ago and I know it has a long way to go. Attached Images __________________ 2009 BSM E92 335xi - RR600's/FBO-VRSF/Apex Arc 8/Wedge E60 MHD/Fuel it Stage 2/BMW PE w/ Dimisa Tips/Alpina TCU/Dinan Springs/RB Inlets/3.5 Bar TMAP
	Appreciate 0 Quote

08-07-2014, 09:50 AM	#9
3neati First Lieutenant 44 Rep 395 Posts Drives: E92 Join Date: Jul 2014 Location: SoCal SFV iTrader: (0)	Nice and clean
	Appreciate 0 Quote

08-07-2014, 10:43 AM	#10
Torgus Slow. 3782 Rep 7,151 Posts Drives: Single Turbo N54 on Meth! Join Date: Jun 2012 Location: Boston, MA iTrader: (2) Garage List 2007 BMW E92 [10.00] 2007 BMW E90 [0.00] 2006 BMW E91 [0.00]	Looks nice and clean. Intercooler really helps you getting heat soaked. The stock IC with a tune heat soaks quick. I would suggest moving the license plate to the toe hook. Looks cleaner imo. Are you an auto? Get those downpipes on as soon as possible after you are FBO protune that bish __________________ E92 ACF ST 6466 + Meth Motiv / E70 #1 fully deleted 2.8 race flash / E70 #2 JBD / E90 & E91 both retired Psalm 144
	Appreciate 0 Quote

08-09-2014, 07:23 AM	#12
Welterweight Major 98 Rep 1,321 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	Just got the car back from Akiki & Sons with an alignment as the springs have settled and got my 7" VRSF inter-cooler installed. She looks pretty! I also changed to Map Stage 1+FMIC aggressive ST and wow I feel a huge difference. Only worry now is that I will blow my stock charge pipe. Should that be next on install list? I also plan to do a walnut blast and new plugs soon. Attached Images __________________ 2009 BSM E92 335xi - RR600's/FBO-VRSF/Apex Arc 8/Wedge E60 MHD/Fuel it Stage 2/BMW PE w/ Dimisa Tips/Alpina TCU/Dinan Springs/RB Inlets/3.5 Bar TMAP
	Appreciate 0 Quote

08-09-2014, 08:46 AM	#13
Torgus Slow. 3782 Rep 7,151 Posts Drives: Single Turbo N54 on Meth! Join Date: Jun 2012 Location: Boston, MA iTrader: (2) Garage List 2007 BMW E92 [10.00] 2007 BMW E90 [0.00] 2006 BMW E91 [0.00]	I would do downpipes my stock charge pipe is fine on 18psi, I know it will not be forever but for now it's fine. Same with my DVs not leaking. I'm a big fan of not replacing parts until needed. You can always buy the DPs and CP from VRSF at the same time.
	Appreciate 0 Quote

08-09-2014, 10:57 AM	#14
Welterweight Major 98 Rep 1,321 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	Downpipes over intake? I will prolly do them both at some point. Maybe I will order them this week. Hahaha. So hard to restrain myself.
	Appreciate 0 Quote

08-09-2014, 01:42 PM	#15
Dkhan22 First Lieutenant 62 Rep 317 Posts Drives: 335i Join Date: Aug 2007 Location: nj iTrader: (4)	Just get BMS dual cone intakes. Like $95. When you do DP you will instantly feel the performance gains.
	Appreciate 0 Quote

08-10-2014, 07:44 AM	#16
Torgus Slow. 3782 Rep 7,151 Posts Drives: Single Turbo N54 on Meth! Join Date: Jun 2012 Location: Boston, MA iTrader: (2) Garage List 2007 BMW E92 [10.00] 2007 BMW E90 [0.00] 2006 BMW E91 [0.00]	yeah intake should be 1st, cheap an easy just get DCIs. __________________ E92 ACF ST 6466 + Meth Motiv / E70 #1 fully deleted 2.8 race flash / E70 #2 JBD / E90 & E91 both retired Psalm 144
	Appreciate 0 Quote

08-10-2014, 09:37 AM	#17
dave96dcm First Lieutenant 32 Rep 355 Posts Drives: Many Join Date: Jan 2008 Location: Gardner, MA iTrader: (0)	I'm less than half of $700-$900 springs and alignment. That price is like $300 a hour! Lol. I don't understand how some shops take so long. I'm not rushing, I'm very thorough and it's always under 3 hours for a springs shocks struts install.
	Appreciate 0 Quote

08-10-2014, 01:03 PM	#18
Welterweight Major 98 Rep 1,321 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	Yeah I almost shit when a local tire shop and bmw shop quoted me close to 1k for install!
	Appreciate 0 Quote

08-16-2014, 12:41 PM	#19
SgtKohRea New Member 0 Rep 11 Posts Drives: 2010 335i XDrive Join Date: Aug 2014 Location: Boston iTrader: (0)	I need to get my suspension installed but not too sure where to go. I gave Akiki a call, but they can't schedule me any earlier than Tuesday. Are there any shops that are open over the weekends?
	Appreciate 0 Quote

08-16-2014, 02:33 PM	#20
Welterweight Major 98 Rep 1,321 Posts Drives: Truck in snow, coupe in summer Join Date: Jan 2013 Location: Boston iTrader: (3) Garage List 2012 BMW 328i [0.00] 2005 Dodge Ram Quad ... [0.00] 2009 BMW 335xi E92 [10.00]	Not sure man but Leo Akiki is legit if you can wait. Tell me Brett sent you!
	Appreciate 0 Quote

08-18-2014, 10:17 AM	#22
SgtKohRea New Member 0 Rep 11 Posts Drives: 2010 335i XDrive Join Date: Aug 2014 Location: Boston iTrader: (0)	So I called them this morning and the lady I spoke to told me to bring it in because they were pretty open today. Drove down from wakefield, and when I got here, a lady asks if she could help me. I asked if they would be able to work on my car and before she even asked me any other questions, she said they were booked for the day. I told her I called and was told to come, so she asked me who I spoke with, and of course I didn't get a name. So I thanked her and left. Went back a couple minutes later to see how long it would take for someone to look at the car. She asked me what kind of BMW it was, when I never mentioned the car, so it was obviously her I spoke to on the phone. She told me I wouldn't need an appointment, but I just wasted 2 hours driving here and back. So yea, not going to come back.
	Appreciate 0 Quote