Calgary

E90Brad · 11-18-2011, 10:43 AM

I know someone who nees all four brakes done on her E90 (323i). They have a quote for around $800 to do the work from Knibbe Auto.

Where do E90post members go to get their brakes done? I thought I saw a little while ago BMW had a brake special where they were doing them for just over $500.

Any suggestions on where I can get a better price?

miguex@ecuprogram · 11-18-2011, 10:47 AM

Why not a DIY?

http://www.bimmerdiy.com/dir/e90

E90Brad · 11-18-2011, 11:16 AM

I thought of that Miguel but it's not my car and I wasnt sure about doing them.

I've done brake jobs on domestics before but never on a BMW.

Plus I chewed my locking wheel nut key like an idiot while putting my winters on so my confidence in my mechanical abilities has taken a hit....

clpower · 11-18-2011, 07:06 PM

http://www.e90post.com/forums/showthread.php?t=402022

Call Tuning Factory and ask for Paul.

CPI · 11-18-2011, 07:30 PM

Check out Vitek's Autoworks or Motorwerkes

dfudge · 11-18-2011, 11:41 PM

Don't let a stripped lock nut get you down. My tip is to get rid of those. I am like you in that I have summer wheels and winter wheels and I got rid of those lock nuts as soon as I got my car. BMW will charge you for the four new bolts but its worth it not having to worry about keeping that wheel lock key.

As for brakes, I own a 323i and asked another 323i owner about maintenance with his car and he got his brakes done at the Calgary dealership. I can't remeber how much but he thought they were reasonable. I think the important thing where ever you go is to use BMW pads and rotors.

Glim · 11-19-2011, 12:39 AM

The DIY is very clear, I did my rear brakes in a few hours, reset the CBS and was good to go.

Stripped lock nut?

Did you strip it by using an impact wrench?

E90Brad · 11-23-2011, 05:25 PM

No not an impact wrench. The key slid out a bit while tightening; plus it was a crappy flower type. I just replaced the lock nut set with a better design, it works fine.

They did the brakes at Knibbe auto. Turns out only the rears needed to get done but they had to replace two rotors..... Not sure what the all in price was

11-18-2011, 10:43 AM	#1
E90Brad Second Lieutenant 26 Rep 263 Posts Drives: SQ5 Join Date: Apr 2011 Location: Canada iTrader: (3)	Calgary - Where do you get your brakes done I know someone who nees all four brakes done on her E90 (323i). They have a quote for around $800 to do the work from Knibbe Auto. Where do E90post members go to get their brakes done? I thought I saw a little while ago BMW had a brake special where they were doing them for just over $500. Any suggestions on where I can get a better price?
	Appreciate 0 Tweet Quote

11-18-2011, 10:47 AM	#2
miguex@ecuprogram Second Lieutenant 37 Rep 203 Posts Drives: 2010 X5 M Join Date: Mar 2009 Location: Calgary, AB iTrader: (3)	Why not a DIY? http://www.bimmerdiy.com/dir/e90
	Appreciate 0 Quote

11-18-2011, 11:16 AM	#3
E90Brad Second Lieutenant 26 Rep 263 Posts Drives: SQ5 Join Date: Apr 2011 Location: Canada iTrader: (3)	I thought of that Miguel but it's not my car and I wasnt sure about doing them. I've done brake jobs on domestics before but never on a BMW. Plus I chewed my locking wheel nut key like an idiot while putting my winters on so my confidence in my mechanical abilities has taken a hit....
	Appreciate 0 Quote

11-18-2011, 07:06 PM	#4
clpower Private First Class 3 Rep 123 Posts Drives: 09 335I X Drive Join Date: Apr 2009 Location: Calgary iTrader: (3)	http://www.e90post.com/forums/showthread.php?t=402022 Call Tuning Factory and ask for Paul.
	Appreciate 0 Quote

11-18-2011, 07:30 PM	#5
CPI 403_e39 137 Rep 1,809 Posts Drives: 2003 ///M5 Join Date: Apr 2007 Location: Calgary, AB iTrader: (7) Garage List 2008 E92 335 [0.00]	Check out Vitek's Autoworks or Motorwerkes __________________ \|\|KWVI Coilovers\|\|Matte Black Grille\|\|28% Tint\|\|Iforged Daytona\|\|19X8 19X10\|\|H&S Exhaust\|\|Exotics Tuning Lip\|\|Slimmbones Rear Diffuser II\|\|AngelIBright V3 Angel Eyes\|\| Fog light covers\|\|UUC RK6 Shift Knob\|\|
	Appreciate 0 Quote

11-18-2011, 11:41 PM	#6
dfudge New Member 1 Rep 8 Posts Drives: 323i Join Date: Jan 2011 Location: Alberta iTrader: (0)	Don't let a stripped lock nut get you down. My tip is to get rid of those. I am like you in that I have summer wheels and winter wheels and I got rid of those lock nuts as soon as I got my car. BMW will charge you for the four new bolts but its worth it not having to worry about keeping that wheel lock key. As for brakes, I own a 323i and asked another 323i owner about maintenance with his car and he got his brakes done at the Calgary dealership. I can't remeber how much but he thought they were reasonable. I think the important thing where ever you go is to use BMW pads and rotors.
	Appreciate 0 Quote

11-19-2011, 12:39 AM	#7
Glim Captain 21 Rep 780 Posts Drives: 2006 330i & 2013 X5 35i Join Date: Jun 2011 Location: Victoria, BC iTrader: (0)	The DIY is very clear, I did my rear brakes in a few hours, reset the CBS and was good to go. Stripped lock nut? Did you strip it by using an impact wrench?
	Appreciate 0 Quote

11-23-2011, 05:25 PM	#8
E90Brad Second Lieutenant 26 Rep 263 Posts Drives: SQ5 Join Date: Apr 2011 Location: Canada iTrader: (3)	No not an impact wrench. The key slid out a bit while tightening; plus it was a crappy flower type. I just replaced the lock nut set with a better design, it works fine. They did the brakes at Knibbe auto. Turns out only the rears needed to get done but they had to replace two rotors..... Not sure what the all in price was
	Appreciate 0 Quote