Adhesive for Bastuck Diffuser

SCMike · 07-12-2010, 08:24 PM

For the Bastuck diffuser install on the stock original rear bumper (with the quads): the diffuser is supposed to be attached to the rear bumper with adhesive. Anyone done this, and using which adhesive? Did you do this (successfully) with the rear bumper still on the car? Or did the rear bumper cover have to come off so that the adhesive was not fighting gravity while it set?

SV Concepts II · 07-13-2010, 12:14 PM

Try using OEM Betalink adhesive. But be warned, this stuff is meant to be semi-permenant.

SCMike · 07-13-2010, 07:00 PM

Quote:

Originally Posted by Cal@Jlevi SW

Try using OEM Betalink adhesive. But be warned, this stuff is meant to be semi-permenant.

Thanks for the tip. With the magic name "Betalink", I was able to do a search and find all sorts of useful information. Semi-permanent is fine; fully-permanent is even better.

07-12-2010, 08:24 PM	#1
SCMike [ex-Stilyaga] 79 Rep 321 Posts Drives: Too slowly... Join Date: Jun 2007 Location: Aiken, SC iTrader: (0)	Adhesive for Bastuck Diffuser For the Bastuck diffuser install on the stock original rear bumper (with the quads): the diffuser is supposed to be attached to the rear bumper with adhesive. Anyone done this, and using which adhesive? Did you do this (successfully) with the rear bumper still on the car? Or did the rear bumper cover have to come off so that the adhesive was not fighting gravity while it set? __________________ NOW: Der 2016 GlitzundBlitzWagen mit ZMP und ZTR und...PCD'd 28Oct15 GONE: 2009 335i Coupe with MPPK ... 2006 M3 Coupe with SMG
	Appreciate 0 Tweet Quote

07-13-2010, 12:14 PM	#2
SV Concepts II 269 Rep 6,093 Posts Drives: E90 M3 Join Date: Dec 2008 Location: 1460 White Oaks Rd. Suite F Campbell, CA 95008 iTrader: (7)	Try using OEM Betalink adhesive. But be warned, this stuff is meant to be semi-permenant.
	Appreciate 0 Quote