question about installing akebono pads

lotusj · 12-03-2012, 08:37 PM

This weekend I will be installing Akebono euro brake pads.

My question is:

Should I use aftermarket anti-squeal (CRC Disc Brake Quiet)
or the Moly Brake lube that comes with the pads?

lotusj · 12-05-2012, 06:07 PM

Bump

my07_335i · 12-06-2012, 06:47 PM

I bought the CRC stuff (Red). I had the damnedest time putting the pads in though, they're so snug. I have not heard a single sound from my breaks since doing it. Same pads.

I don't normally use the thermal paste that comes with cpu fans, as it's garbage most of the time. I apply the same logic to stuff included with auto parts.

Bartman619 · 12-06-2012, 07:23 PM

This is what I used when I installed my Stoptech Street Pads..

http://www.etrailer.com/Accessories-...e/LT40300.html

07e92 · 12-07-2012, 12:33 AM

I just did mine Akebono euro front and rear this past weekend, and use the lube that came with the pad. They are quiet, no issue so far.

Meeni · 12-08-2012, 01:42 AM

The red CRC goop is easier to install because it dries. Found the silver goop provided with Akebono pads to spill everywhere and be annoying. I'm sure it works just fine if you are careful when installing the pads.

crashoverride · 12-11-2012, 02:12 AM

There is nothing special or some secret hidden recipe for making the stuff even better... Just use what came with it..... It works that's why they include it.

lotusj · 12-17-2012, 12:55 PM

Thanks for everyones input.

This is what CRC has to say

Thank you for your interest in CRC products. We would recommend using Synthetic Brake Caliper Grease for your shimmed brake pads. Disc Brake Quiet is ment for usage on non-shimmed brake pads. The Brake Quiet's tackiness will cause the shimmed pad to not work properly. Addtionally the Synthetic Brake Grease will cut down on corrosion on the brakes.

I used the moly lube that came with the pads, It was a very very small amount but if your careful you can make it last.

1000 miles and no noise.

Thanks again.

12-03-2012, 08:37 PM	#1
lotusj New Member 6 Rep 17 Posts Drives: BMW 328I coupe Join Date: Oct 2012 Location: Michigan iTrader: (0)	question about installing akebono pads This weekend I will be installing Akebono euro brake pads. My question is: Should I use aftermarket anti-squeal (CRC Disc Brake Quiet) or the Moly Brake lube that comes with the pads? __________________ A Toast: " To internal combustion and wind in the face"
	Appreciate 0 Tweet Quote

12-05-2012, 06:07 PM	#2
lotusj New Member 6 Rep 17 Posts Drives: BMW 328I coupe Join Date: Oct 2012 Location: Michigan iTrader: (0)	Bump __________________ A Toast: " To internal combustion and wind in the face"
	Appreciate 0 Quote

12-06-2012, 06:47 PM	#3
my07_335i Second Lieutenant 20 Rep 254 Posts Drives: 2007 E90 SMG 335i Join Date: Feb 2010 Location: Santa Clara, CA iTrader: (1) Garage List 2007 335i [0.00]	I bought the CRC stuff (Red). I had the damnedest time putting the pads in though, they're so snug. I have not heard a single sound from my breaks since doing it. Same pads. I don't normally use the thermal paste that comes with cpu fans, as it's garbage most of the time. I apply the same logic to stuff included with auto parts. __________________ '07 SGM + DG 335i sedan\|Navi\|ZPP\|Rear PDC\|Euphoria 6k LED interior\|Matte Black Grills\|OEM Blacklines\|MTEC A.E's\|CF Roundels\|Alufelgen 19" CS7 with 15/12mm spacers If I buy something from you please leave me feedback My Portfolio
	Appreciate 0 Quote

12-06-2012, 07:23 PM	#4
Bartman619 Captain 25 Rep 701 Posts Drives: Bimmer Join Date: Jun 2008 Location: SDCA iTrader: (2)	This is what I used when I installed my Stoptech Street Pads.. http://www.etrailer.com/Accessories-...e/LT40300.html
	Appreciate 0 Quote

12-07-2012, 12:33 AM	#5
07e92 First Lieutenant 121 Rep 316 Posts Drives: 07 335i Join Date: Jul 2012 Location: N CAL iTrader: (3)	I just did mine Akebono euro front and rear this past weekend, and use the lube that came with the pad. They are quiet, no issue so far.
	Appreciate 0 Quote

12-08-2012, 01:42 AM	#6
Meeni Gateropode 329 Rep 2,848 Posts Drives: BMW 330i 06 Join Date: Apr 2012 Location: TN iTrader: (0)	The red CRC goop is easier to install because it dries. Found the silver goop provided with Akebono pads to spill everywhere and be annoying. I'm sure it works just fine if you are careful when installing the pads.
	Appreciate 0 Quote

12-11-2012, 02:12 AM	#7
crashoverride Lieutenant 177 Rep 581 Posts Drives: na Join Date: Jul 2006 Location: na iTrader: (0)	There is nothing special or some secret hidden recipe for making the stuff even better... Just use what came with it..... It works that's why they include it.
	Appreciate 0 Quote

12-17-2012, 12:55 PM	#8
lotusj New Member 6 Rep 17 Posts Drives: BMW 328I coupe Join Date: Oct 2012 Location: Michigan iTrader: (0)	Thanks for everyones input. This is what CRC has to say Thank you for your interest in CRC products. We would recommend using Synthetic Brake Caliper Grease for your shimmed brake pads. Disc Brake Quiet is ment for usage on non-shimmed brake pads. The Brake Quiet's tackiness will cause the shimmed pad to not work properly. Addtionally the Synthetic Brake Grease will cut down on corrosion on the brakes. I used the moly lube that came with the pads, It was a very very small amount but if your careful you can make it last. 1000 miles and no noise. Thanks again. __________________ A Toast: " To internal combustion and wind in the face"
	Appreciate 0 Quote