[SuckMy_Nick]

I have an 07' e92 coupe, my frameless windows go down when you open and back up when you close (obviously) but recently, it stopped doing this (driver side only)

Does anyone know what the problem could be? And maybe how I can fix if

Thanks

[JustinGTP]

Sounds like you have to have the window reinitialized. Does it go up if you make it go up with the door switch?

[SuckMy_Nick]

Originally Posted by JustinGTP

Sounds like you have to have the window reinitialized. Does it go up if you make it go up with the door switch?

Yes, it goes up and down if I'm in the car pressing the switch but the while problem is when opening and closing the door, it doesn't move

[JustinGTP]

Try this

Erasure of initialization:
 Open door window glass fully
 Operate power window switch in "Open" position four times
within 10 seconds
This erases initialization of the power window, anti-trapping
protection and toll function are inactive.
Check whether one-touch control (toll) function is inactive,
otherwise repeat procedure.
Reinitialization:
Avoid a break between the two steps!
 Open door window glass fully
 Operate and hold power window switch in "Close" position
(second switch stage)
 Once the upper end position has been reached, hold power
window switch in "Close" position for approx. 2 seconds longer
 Open door window glass fully
 Operate and hold power window switch in "Close" position
(second switch stage)
 Once the upper end position has been reached, hold power
window switch in "Close" position for approx. 2 seconds longer
This completes initialization.
Note:
Carry out function check (one-touch control function, anti-trapping
protection and, if necessary, comfort function).

[SuckMy_Nick]

Originally Posted by JustinGTP

Try this

Erasure of initialization:
 Open door window glass fully
 Operate power window switch in "Open" position four times
within 10 seconds
This erases initialization of the power window, anti-trapping
protection and toll function are inactive.
Check whether one-touch control (toll) function is inactive,
otherwise repeat procedure.
Reinitialization:
Avoid a break between the two steps!
 Open door window glass fully
 Operate and hold power window switch in "Close" position
(second switch stage)
 Once the upper end position has been reached, hold power
window switch in "Close" position for approx. 2 seconds longer
 Open door window glass fully
 Operate and hold power window switch in "Close" position
(second switch stage)
 Once the upper end position has been reached, hold power
window switch in "Close" position for approx. 2 seconds longer
This completes initialization.
Note:
Carry out function check (one-touch control function, anti-trapping
protection and, if necessary, comfort function).

Thanks, I'll give it a shot in a few minutes