[dirte90]

Originally Posted by irq5

Klove - I think you and me are on the same page. I also want one that follows the lines of the indent all the way to the sides of the bumper with a lip around the edge including the exhaust opening and fins...

+1

[dirte90]

Subscribed! I need to do something with my rear badly.

[irq5]

Originally Posted by E46toE90

I thought the single sided exhaust was first for development

You're right - it will be. Unfortunately for those who want the dual opening, I have to do the single side opening first. But I'm going to try make them in seriously quick succession as the change is miniscule to make the item into a dual opening item. So if anything I wouldn't expect much more than a month or two after the single side is done, the dual side should be done too...

Will keep you guys updated. Visiting the moulders again on Wednesday regarding the m-tech / m-sport version, but will get an update on this one too...

[ska///235i]

please dont make it look like the ACS add on rear lip with fins

fins sticking out of the bumper is rice imo

fins only look good if the diffuser is inside the bumper and fins line up with bumper line which in this case is not going to work, unless the fins are <half an inch

[klove83]

Originally Posted by irq5

You're right - it will be. Unfortunately for those who want the dual opening, I have to do the single side opening first. But I'm going to try make them in seriously quick succession as the change is miniscule to make the item into a dual opening item. So if anything I wouldn't expect much more than a month or two after the single side is done, the dual side should be done too...

I dont know if you keep getting confused on which is first... You would tell me everytime I ask if it was dual quads first and you said yes because I was the one requesting this diffuser to be made in the first place. I would really like to run a diffuser as soon as possible. So please do the dual quads first. When its done I have money to pay right away and will get installed right away with pictures to post. I already have my tips i just need the diffuser to finish it.

[dirte90]

I think there is higher demand for the single side exhaust, followed by the 335 dual exhaust. From a business perspective it would be smarter to meet the higher demand first.

[irq5]

Originally Posted by irq5

Dammit - you're right. I lost sight of the fact that you started it in the first place...

I'm going to see the guy on Monday to chat about this work. Let me see what I can organise. Most of the moulding is going to be the same, so perhaps it'll only take a week or so longer to get the non-335 quad setup going.

Let me see what I can organise. Either way I'll defiinitely switch the order around so that we go non-335 dual, non-335 quad, 335 dual, 335 quad instead...

Klove, I posted this before. The order will still be as above. I have to take the casting from the stock bumper first and develop a mould from that casting. Once that's done we can modify the mould to include the same cut-out on the other side.

Really sorry man, but I have to do the single opening first. Either way, like I say, I'm going to be pushing to have them ready within a month or two of each other.

[irq5]

Originally Posted by ska325xi

please dont make it look like the ACS add on rear lip with fins

fins sticking out of the bumper is rice imo

fins only look good if the diffuser is inside the bumper and fins line up with bumper line which in this case is not going to work, unless the fins are <half an inch

I'm going to do something unique. I know some people think that fins look rice, but I like them and so do a good few people here... So it's going to have fins. They won't be garish in any way though and if my design comes out the way I want it to, you might like it - the fins will be small-ish and won't come out past the "lip" that's going to be created around the diffuser and the exhaust cut-outs...

I know that , so hold thumbs that I can get a view of the design soon!

[SINGH310]

I have money ready too! I need a diffuser for e90 328 stock bumper that is going to be quad...

[halkordy89]

now this is something ive been waiting for! count me in for
1. Pre-LCI
2. 335 single dual exhaust
3. FINS!!

[irq5]

Originally Posted by halkordy89

now this is something ive been waiting for! count me in for
1. Pre-LCI
2. 335 single dual exhaust
3. FINS!!

Will let you know as soon as I have one for the 335

[irq5]

Just a quick update. Spoke to the moulders today. They have a few other things that they're finishing off and should have a preliminary part to show me by the 15th June.

Bummed I have to wait so long! But either way, it's coming!

[klove83]

I guess ill sit back and wait :/

[dirte90]

Originally Posted by irq5

Just a quick update. Spoke to the moulders today. They have a few other things that they're finishing off and should have a preliminary part to show me by the 15th June.

Bummed I have to wait so long! But either way, it's coming!

I am looking forward to this one!

[irq5]

Originally Posted by klove83

I guess ill sit back and wait :/

I'm doing my best to make sure it's not a long wait! Promise!

[klove83]

I understand u can do so much. Just can't wait to see what it will look like. Then it will be harder to wait.

Originally Posted by irq5

I'm doing my best to make sure it's not a long wait! Promise!

[Back in a Subie]

subscribed, very interested in 330 e90 (pre-lci) fitment

[AWLE902008]

any updated pics? cant wait

[Magic-Man]

So us pre-lci E90 folks have zero rear diffuser options?

[irq5]

Originally Posted by klove83

I understand u can do so much. Just can't wait to see what it will look like. Then it will be harder to wait.

Originally Posted by AWLE902008

any updated pics? cant wait

Well, I'm visiting the moulder tomorrow for a first look. Klove, I'm sorry if I'm going to get you salivating... Will post an update hopefully with pics tomorrow...

Originally Posted by Mi330xi

subscribed, very interested in 330 e90 (pre-lci) fitment

Well, the first one will fit you car perfectly

Originally Posted by Magic-Man

So us pre-lci E90 folks have zero rear diffuser options?

Magic-man, this is the very issue I'm trying to rectify. Pretty soon you'll have at least 1 option

[E46toE90]

Pictures!

[klove83]

I know it hurts.