[BoostAddict]

So, did you remove just the spring, or the spring and brass piece of the Thermostat?

[MKR_DmD]

I removed both when I did mine.

[BoostAddict]

Originally Posted by DrivinMissDaisy

I removed both when I did mine.

Thanks, I feel better. I just took both out wished for the best lol

[Will335i]

I am wondering if you could have just bought adapters instead of taping and welding the plugs. I am working on putting the parts together for a retro fit soon (no oil cooler currently on mine). I think I have everything picked out and I am going with Setrab 625. I know on the AR kit the fittings on the cooler are facing down. Have you had any issues with the fittings facing up? I am also still trying to figure out how I am going to mount it. I am thinking just some of the nylon quick mounts that go through the radiator.

[kiwi29]

is this even possible for a n52?

[Tmgxray]

for oil to mainly flow through the oil coolers you have to leave the brass piece in to block off the bypass.

[BoostAddict]

Originally Posted by Tmgxray

for oil to mainly flow through the oil coolers you have to leave the brass piece in to block off the bypass.

I ended up taking the brass piece out, and saw an estimated 15-20* drop cruising around town.

[dquach93]

If this is possible for an N52, id like to look into doing this!

[JB135MDCT]

Has any one tried cutting small piece of the spring to re-call the system to a lower temp. I would bet the oem cooler is good as is.

[neilvosko]

the oem cooler is barely good for daily and spirited, but for track, you have to go aftermarket.

i am in hot florida so i am thinking about removing the oil thermostat after reading your post, are you still running this configuration? do you ever track the car? what temps are you running without tstat.

so do you remove both the springs and the bolt? not clear here?

[yandy]

Originally Posted by neilvosko

the oem cooler is barely good for daily and spirited, but for track, you have to go aftermarket.

i am in hot florida so i am thinking about removing the oil thermostat after reading your post, are you still running this configuration? do you ever track the car? what temps are you running without tstat.

so do you remove both the springs and the bolt? not clear here?

I think it's both, +1; wanna make sure as well.

[BoostAddict]

I removed both when I did it.

[yandy]

Originally Posted by ***********

I removed both when I did it.

Awesome thanks;

[neilvosko]

nice, thanks ***********.

[neilvosko]

wait, so you took the spring out and left the plunger inside?

i am confused by all other posts? how is it daily vs track?

[thetedderbear]

Is this for those who don't have the oem cooler? Does it run in addition to the oem one? And what does removing the spring do?

[IancoleTX]

So for 135i, how would we connect to to the thermostat outlets?

[335iDCT]

Would it be simpler or any differences running the cooler in series with the OE one such that no adapter block or taping the T-stat housing are involved?

[taylors335]

it is used i conjunction with the oem unit , i have now switched to the AR design block but still using my own cooler and line setup

[dillonmpower]

What torque spec did you torque the custom plug it back to ? How have the welds held up on the plug?