[paapaa]

Hi

I have 325D E90 manual (3l engine) and just bought
G-Tech Pro SS...but when i try to calibrate different RPM´s and of course set the cylinder to 6...still
rpm going up and down quite a lot :/

i would appreciate any advices! changes anymore to get g-tech to show the rpm´s right?

regards,
Kai

[Tucker]

Put on your rear window demister and air con and that will sort it out.

[paapaa]

Originally Posted by Tucker

Put on your rear window demister and air con and that will sort it out.

tried that and...didnt help.not even a bit :/


tried before this: i connected directly to car´s battery´s + and - points and rpm very accurate! and not even changing up and down now i will try roof light´s connection...maybe the last thing to do before connecting directly to car´s battery :/

[coodem]

After the battery, its all filtered. Under the driver footwell, you will see the main battery bus bar, just tap into that on the un filtered side, no probs for me

[paapaa]

Originally Posted by coodem

After the battery, its all filtered. Under the driver footwell, you will see the main battery bus bar, just tap into that on the un filtered side, no probs for me

ohh my english seems to be out of order...cannot understand 100% sure...i looked driver footwell and i only found a yellow,plastic box under driver´s seat...where is connected some wires.is that the place you are saying?

if not..please explain like to a child the place would be much closer that wiring from main battery.

[paapaa]

got it worked now in 325D

wired from + and - points to the cabin and vola!
we thought would be closer than wire from the car main battery in the trunk