|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
E9x KCAN 101
|
|
06-29-2023, 10:13 AM | #156 |
Ballin' out of control.
521
Rep 1,289
Posts |
No, it's not something that I'm familiar with.
__________________
Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms
|
Appreciate
0
|
09-01-2023, 06:49 AM | #157 |
New Member
17
Rep 13
Posts |
Very interesting post. I've been reading around on the forum trying to gather some information that might help me diagnose my issue. ( https://www.e90post.com/forums/showthread.php?t=2042899 )
Wondering if anyone here could give me some tips on the best way to do it, or at least where to start. So far no errors in ISTA/INPA... |
Appreciate
0
|
09-07-2023, 09:56 PM | #158 |
Registered
0
Rep 2
Posts |
Hi All,
Very nice thread, good guidance and informative, Just want to share...I have manage to make my memory seat to work with my custom board outside a car. I have memory as what I required. I will retrofit this seat (E90 sport seat) to my toyota car. But I have some issued as below, 1. When I already set my memory, when I push button 1 or 2 after that, it does not move to the set position. I need to power off the seat and on again then only I can push the 1 or 2 button to the setting position. I think I am missing canbus message to the seat or the message is not send at correct interval, 2. I manage to make the seat move with one touch press, but the movement is not complete to the set position. Can anyone help me to sniff the canbus message when the memory are activating during both event mention above so I can simulate the canbus messages, as I am not own a BMW car, Highly appreciate it Thanks |
Appreciate
0
|
10-12-2023, 08:35 PM | #159 | |
Registered
0
Rep 2
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|