v32.1 PROcede maps

roho3323 · 02-06-2009, 12:42 PM

Quote:

Originally Posted by jpsimon

the procede doesn't need 6 billion maps because everything is adjustable and/or automatically implemented. you just figure out the stage you're at, and DD or nonDD. The rest is adjustable or automatically implemented in every map (like altitude compensation, lag fix, etc)

Thanks...another question. How does it come out of the box? Do I need to configure Rev II?

I am stage 0 and want the DD map.

timtech · 02-06-2009, 12:57 PM

If you do move to only one DME type and the beta now has the same table for map 1 and 2, will there be recommendations for the user adjustments on map 2 for race gas?

OpenFlash · 02-06-2009, 12:58 PM

Quote:

Originally Posted by timtech

If you do move to only one DME type and the beta now has the same table for map 1 and 2, will there be recommendations for the user adjustments on map 2 for race gas?

There will be actual race gas maps. There is a bit more to a race gas map that can be adjusted through the User Adjustable parameters.

Shiv

sflgator · 02-06-2009, 06:50 PM

Quote:

Originally Posted by shiv@vishnu

Yep.. then we could implement a pre29.2/post29.2 user adjustable parameter. The pre-29.2 selection will enable the user to raise user torque and do all sorts of things without worry of tripping the tuner code. While the post 29.2 will still allow UT adjustments but will ignore adjustments made at RPM ranges where tuner code would get tripped. Sounds like the proper way to do things in the long run.

Shiv

I suppose that makes sense moving forward since the 2009's are out with the 2010's coming in ~ 7 months...all of which have the newer DME and s/w.

onefastdoc · 02-09-2009, 07:37 PM

Quote:

Originally Posted by shiv@vishnu

There will be actual race gas maps. There is a bit more to a race gas map that can be adjusted through the User Adjustable parameters.

Shiv

Please e-mail me the race map as soon as it is available. I'm driving on 100% UT now with 100oct and I love it, but I'm sure the race map will be even better!

OneFastDoc

OpenFlash · 02-09-2009, 08:19 PM

Well.... it looks like we'll have non-beta v3.2 maps/firmware up later this week. Along with final non-beta User Software (with self-installer).

Changes/updates:
- User enable/disable of the Speed delimiter
- User enable/disable of the o2 sim (fully adjustable 0-100% as well)
- User adjustable Throttle response (independently adjustable for map1 and map2)
- Pre-configured data-log parameters (no need to set-up them up anymore)
- and more

Once that is posted, I'll start posting up different versions of the maps (96oct, 104oct, etc,.)

Cheers,
shiv

PS. You guys will really dig v3.3 beta. Already started to work on that

Gen_E92 · 02-09-2009, 08:24 PM

V3.3

...ETA for V4?

jk jk

sflgator · 02-09-2009, 08:36 PM

Quote:

Originally Posted by shiv@vishnu

Well.... it looks like we'll have non-beta v3.2 maps/firmware up later this week. Along with final non-beta User Software (with self-installer).

Changes/updates:
- User enable/disable of the Speed delimiter
- User enable/disable of the o2 sim (fully adjustable 0-100% as well)
- User adjustable Throttle response (independently adjustable for map1 and map2)
- Pre-configured data-log parameters (no need to set-up them up anymore)
- and more

Once that is posted, I'll start posting up different versions of the maps (96oct, 104oct, etc,.)

Cheers,
shiv

PS. You guys will really dig v3.3 beta. Already started to work on that

What is the current Throttle Response in the newest beta maps?

btw -- I really like the newest 6AT Stage 1 beta map...the smoothest and best throttle response to date, imho. Also, I noticed much improved TQ down low as well...great job, Shiv!!!!

Soni · 02-09-2009, 10:41 PM

Quote:

Originally Posted by shiv@vishnu

PS. You guys will really dig v3.3 beta. Already started to work on that

prich2004 · 02-09-2009, 11:31 PM

Excuse me. When in the stg. 1 93 oct. 500 whp map coming out? Thanks.

phattbam · 02-09-2009, 11:33 PM

Quote:

Originally Posted by prich2004

Excuse me. When in the stg. 1 93 oct. 500 whp map coming out? Thanks.

I think each V series reaches that bracket. V3- in the 300s HP range
V4 will hit 400s
V5 you guess it 500s..

I'm only dreaming btw.. wouldn't that be ideal.

joec500 · 02-12-2009, 06:43 PM

Hey Shiv, any update? I just got my REVII today, can't wait to get it home.

I have the newest V32 software, can I assume the the 3.2 Beta maps you have posted will be compliant?

THANKS!

munters · 02-13-2009, 01:43 AM

Quote:

Originally Posted by joec500

Hey Shiv, any update? I just got my REVII today, can't wait to get it home.

I have the newest V32 software, can I assume the the 3.2 Beta maps you have posted will be compliant?

THANKS!

As he mentionned. same maps same procedure to install.

02-06-2009, 12:57 PM	#68
timtech Lieutenant 25 Rep 518 Posts Drives: M3 Join Date: May 2007 Location: Over there iTrader: (7)	If you do move to only one DME type and the beta now has the same table for map 1 and 2, will there be recommendations for the user adjustments on map 2 for race gas?
	Appreciate 0 Quote

02-09-2009, 08:19 PM	#72
OpenFlash 1736 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Well.... it looks like we'll have non-beta v3.2 maps/firmware up later this week. Along with final non-beta User Software (with self-installer). Changes/updates: - User enable/disable of the Speed delimiter - User enable/disable of the o2 sim (fully adjustable 0-100% as well) - User adjustable Throttle response (independently adjustable for map1 and map2) - Pre-configured data-log parameters (no need to set-up them up anymore) - and more Once that is posted, I'll start posting up different versions of the maps (96oct, 104oct, etc,.) Cheers, shiv PS. You guys will really dig v3.3 beta. Already started to work on that
	Appreciate 0 Quote

02-09-2009, 08:24 PM	#73
Gen_E92 Brigadier General 118 Rep 3,432 Posts Drives: slow Join Date: Oct 2006 Location: Vancouver iTrader: (17) Garage List 2007 335i [7.80]	V3.3 ...ETA for V4? jk jk
	Appreciate 0 Quote

02-09-2009, 11:31 PM	#76
prich2004 Private First Class 2 Rep 124 Posts Drives: E90 335i Join Date: Jun 2008 Location: Houston iTrader: (0) Garage List 2008 E90 335i [0.00]	Excuse me. When in the stg. 1 93 oct. 500 whp map coming out? Thanks. __________________ *E90 335i \| Metallic Graphite \| AT Step \| Sport \| Premium \| Satellite \| iPod \| Ceramic Tint \| PROcede V4 \| BMS DCI*
	Appreciate 0 Quote

02-12-2009, 06:43 PM	#78
joec500 Brigadier General 125 Rep 3,004 Posts Drives: it has 4 wheels Join Date: Jul 2008 Location: San Francisco iTrader: (10)	Hey Shiv, any update? I just got my REVII today, can't wait to get it home. I have the newest V32 software, can I assume the the 3.2 Beta maps you have posted will be compliant? THANKS!
	Appreciate 0 Quote